Proceedings of IEEE TEM 2003
Table of Contents
Session I: Communications & Networking I
(1)
Development of an Optimization Algorithm for Internet Data Traffic,
Syed Misbahuddin and Tariq Ibn Aziz, Department of Computer Science and Software
Engineering, Hail Community College, KFUPM.
(2)
Reliability based Topological Optimization of Computer Networks Part I:
Enumerative Techniques,
M. Abd-El-Barr, S.M. Sait, and A.S. Al-Mulhem and Ahmer
Zakir, COE and ITC, KFUPM, Dhahran, Saudi Arabia.
(3)
Reliability based Topological Optimization of Computer Networks, Part II,
Iterative Techniques,
M. Abd El-Barr, S.M. Sait, and A.S. Al Mulhem and Ahmer
Zakir, COE and ITC, KFUPM, Dhahran, Saudi Arabia.
Session II Power & Control I
(1)
Steady-State Voltage Collapse Prediction and Correction using Artificial Neural
Network,
M. Nazih Syed-Ahmad and Ahmed Bensenouci, Electrical Technology
Department, College of Technology at Al-Baha.
(2) NLMS
Based Adaptive Control of Stable Plants,
Muhammad Shafiq, Department of Computer
Science, KFUPM.
(3) Impact
of Induction Machine Model in Fault Studies,
Maamar Taleb, Mohamed R. Qader and
Abdulla M. Abdulla, Department of Electrical and Electronics Engineering,
Bahrain.
Session III Communications & Networking II
(1) UBR
Congestion controlled Video Transmission over ATM,
Eltayeb Omer Eltayeb, STC,
Saudi Arabia.
(2) Analysis
of KFUPM Web Traffic Proxy Access Logs,
Abdul Waheed, COE Department, KFUPM,
Dhahran, Saudi Arabia.
(3) A
Measurement Based Memory Performance Evaluation of Streaming Media Servers,
Garba Isa Yau and Abdul Waheed, COE Department, KFUPM, Dhahran, Saudi Arabia.
(4) Network
Security Implementation for Academic Institutes,
Mohammad A. Al-Akhras and
Mohamad Mustapha Chafic, Dubai University College, UAE.
Session IV Power & Control II
(1) On the
Mathematical Modeling of Arcs in AC Circuit Breakers,
M. Abdel-Salam and Nabil
A. Ahmed, Assiut University, Egypt.
(2)
Application of EMTP simulation Software for Implementation of a Phase Shift
Correction,
S.A. Al-Mawsawi, M.R. Qader and S. Nasimi, University of Bahrain.
(3) Review
of condition monitoring in electrical machines: Strategies and Techniques,
Ali Salah Hennache, Hail College of Technology, KFUPM, Hail, Saudi Arabia.
(4) Fuzzy
Logic Adaptive Controllers,
S. Akhtar, and F. Al-Sunni, Systems Engineering
Department, KFUPM, Dhahran, Saudi Arabia.
Session V VLSI & Electronics
(1) High
Speed Low Power (2k) Elliptic Curve Cryptography Processor Architecture,
Adnan
Abdul-Aziz Gutub, COE Dept., KFUPM, Dhahran, Saudi Arabia.
(2) GATS: A
Novel Hybrid Algorithm for Multiobjective Cell Placement in VLSI Circuit Design,
Sadiq M. Sait and Mahmood R. Minhas, COE and ICS Departments, KFUPM, Dhahran,
Saudi Arabia.
(3) Design
and Implementation of a Bilingual LED Message Board,
A. Zidouri, M. Deriche, M.
Al-Otaibi, M. Al Shahrani, M. Al Mutairi, T. Al-Maleki, S. Al-Ghunaim, A.
Al-Nutaifi, H. Al Issa, F. Al Anazi, EE Department, KFUPM, Dhahran, Saudi
Arabia.
Session VI Engineering Education and Management
(1) The
Impact of Technology and Management Practices On the Success of Saudi
Industries,
Tarik Al-Sulimani, El Ajou Group, Riyadh Saudi Arabia.
(2) Future
Potential for Building Management Systems Technology at Saudi Aramco,
Zaki
Al-Haiki, Saudi Aramco, Dhahran.
(3)
Application of Energy Conservation Methods to Lighting System: Case Study,
Tawfiq T. Al-Saba, Community Maintenance Department, Saudi Aramco Dhahran.
Session VII Signal Processing
(1) On The
FFT of 1-Bit Dither-Quantized Deterministic Signals,
L. Cheded, S. Akhtar,
Systems Engineering, KFUPM, Dhahran, Saudi Arabia.
(2) Pile-Up
Free parameter estimation and digital on-line peak localization algorithms for
Gamma Ray Spectroscopy,
J.M. Noras, M.W. Raad and M. Deriche, COE, KFUPM, School
of Engineering, Bradford University, UK and EE Department, KFUPM, Dhahran, Saudi
Arabia.
(3) An
Algorithm for IRIS Identification Using Fourier Descriptors,
M. Deriche, M.
Mohandes and J. Bakhashswain, EE Department, KFUPM.
Session VIII Power & Control III
(1) A Solid
State Static Var Compensator Based Power Network Stabilizer,
A. Tahri, A. Draou,
EE Department, Madinah College of Technology, Madinah, Saudi Arabia.
(2)
Optimized Fuzzy Variable-Structure Control For a Field-Oriented Control of An
Induction Motor,
Ahmed Bensenouci, A.M. Abdel Ghany and M.N. Syed-Ahmad,
Department of Electrical Technology, College of Technology, Al Baha, Saudi
Arabia.
(3) Power
Systems Load Predictions Assessment for the Kingdom of Bahrain,
Isa S. Qamber,
Ali A. Al-Jamea, and Mohammed Y. Al-Hamad, University of Bahrain, Department of
Electrical and Electronics Engineering.
Session IX Electromagnetics
(1) Charging
of Spherical Particles in Unipolar Ionized Electric Fields,
M. Abdel-Salam and
A. Hashem, Assiut University, Egypt.
(2) Gaussian
Beam Coupling to Multi-Layer ARROW,
Mohammed Abdul Majid and Hussain A. Jamid,
EE Department, KFUPM, Dhahran, Saudi Arabia.
(3) TE/TM
Pass Guided Wave Optical Polarizer,
M. Ajmal Khan and Hussain A. Jamid, EE
Department, KFUPM, Dhahran, Saudi Arabia.
Session X Algorithms
(1) A New
Parallel Genetic Algorithm Model,
Turki F. Al Somani and Kalim Qureshi, COE and
ICS Departments, KFUPM, Dhahran, Saudi Arabia.
(2) Visual
Observation of Pre-Breakdown Phenomena in the mixtures of liquid PCB and PXE,
Mehmet Oguz Hengirmen and Celal Korasli, University of Gaziantep and University
of Bahrain.
(3)
Engineering Education and Personality Types,
L.F. Capretz, Department of
Electrical and Computer Engineering, University of Western Ontario, Canada.
(4) An
L2-Gap Metric Identification Algorithm,
S.H. Al-Amer, KFUPM.
Session XI Power and Control IV
(1) A
Measurement Based Memory Performance Evaluation of Streamlining Media Servers,
Garba Isa Yau and Abdul Waheed, COE, KFUPM, Dhahran, Saudi Arabia.
(2) Control
of an Indirect Field-Oriented Induction Motor using Fuzzy Logic,
Y. Miloud and
A. Draou, and A. Miloudi, University Center of Saida, Algeria, Madinah College
of Technology, Madinah, KSA.
(3) Saudi
Aramco Community, Buildings and Office Services Toward Energy Conservation,
Jamal E. Al Jaber and Ali S. Al Shahrani, Saudi Aramco, Dhahran, Saudi Arabia.
End of TOC