| |
Papers in Refereed Journals
1- M.O.Budair, M.Mahmood, M.K.Abusaleh," Experiments on a flat square plate
at high incidence and different Reynolds numbers", AJSE, Vol. 15, pp. 553-564,
1990.
2- M.Budair," Some features of the wake of a finite circular cylinder at a low
subcritical Reynolds number", AJSE, Vol. 16, pp.397-408, 1991.
3- M.Budair, A. Ayoub, K. Karamcheti," Frequency measurements in a finite
cylinder wake at a subcritical Reynolds number", AIAA Journal, Vol.29, pp.
2163-2168, 1991.
4- S. O. Daffuaa, A. N. Shuaib, A. Raouf, M. O. Budair, " Evaluation of
maintenance management systems", Journal of King Saud University, ( Special
Issue on Maintenance), Vol.4, pp.29-43, 1992.
5- M. O. Budair, M. Najjar, K. Al-Qurashi, " Grade-point-average-Based scheme
for tracking academic students’ performance at King Fahd University of Petroleum
& Minerals", The European Journal of Engineering Education, Vol.17, pp. 95-103,
1992.
6- S. O. Daffuaa, M.O. Budair, "Optimal schedules for scale removal in heat
exchange equipment", Engineering Optimization, Vol. 21, pp. 165-174, 1993.
7- S. O. Duffuaa, M. O. Budair , " Scale removal from heat-exchangers: Using
energy utilization as a schedule criterion ”, Journal of Applied Energy, Vol.
47, pp. 77-85, 1994.
8- M. A. Z. Hasan, M. O. Budair,” Role of splitter plates in modifying cylinder
wake flows”, AIAA Journal, Vol. 32, pp.1992-1998, 1994.
9- M. Sultan Khan, S. M. Zubair, M. O. Budair, A. K. Sheikh, and A. Quddus, “
Fouling resistance model for prediction of CaCo3 scaling in AISI 316 tubes”,
Heat and Mass Transfer, Vol. 32, pp. 73-79, 1996.
10- A. K. Sheikh, S. M. Zubair, M. U. Haq, M. O. Budair, “ Reliability-Based
maintenance strategies for heat exchangers subject to fouling”, Transactions of
the ASME, Journal of Energy Resources Technology, Vol. 118, pp. 306-312, 1996.
11- M. A. L. El-Shaarawi, M. O. Budair, M. S. A. Al-Qahtani,” Turning moment of
rotating inner cylinder in the entry region of concentric annuli”, JSME
International Journal, Series B, Vol. 40, No.1, pp.67-74, 1997.
12- S. M. Zubair, A. K. Sheikh, M. O. Budair, M. A. Badar, “ A maintenance
strategy for heat transfer equipment subject to fouling: A probabilistic
approach”, Journal of Heat Transfer, Vol.119, pp. 575-580, 1997.
13- S. M. Zubair, A. K. Sheikh, M. O. Budair, M. U. Haq, A. Quddus, O. A. Ashiru,
“ Statistical aspects of CaCO3 fouling in AISI 316 stainless-steel tubes”,
Journal of Heat Transfer, Vol. 119, pp. 581-588, 1997.
14- M. O. Budair, M. S. Khan, S. M. Zubair, A. K. Sheikh, A. Quddus, “ CaCO3
scaling in AISI 316 stainless steel tubes – effect of thermal and hydraulic
parameters on the induction time and growth rate ”, Heat and Mass Transfer, Vol.
34, pp. 163-170, 1998.
15- N. Ahmed, B. S. Yilbas, M. O. Budair,” Computational study into the flow
field developed around a cascade of NACA 0012 airfoils”, Computer Methods in
Applied Mechanics and Engineering, Vol. 167, pp. 17-32, 1998.
16- B. S. Yilbas, M. O. Budair, M. Naweed Ahmed,” Numerical simulation of the
flow field around a cascade of NACA 0012 airfoils - effects of solidity and
stagger”, Computer Methods in Applied Mechanics and Engineering, Vol. 158, pp.
143-154, 1998.
17- S.Z.Shuja, B.S. Yilbas and M. O. Budair, “ Modeling of laser heating of
solid substance including assisting gas impingement”, Numerical Heat Transfer,
An International Journal of Computation and Methodology, Part A, Vol. 33, pp.
315-339, 1998.
18- S. O.Duffuaa, M. O. Budair, “ Impact of scale build-up models on energy
utilization in heat exchangers ”, Int. J. Energy Res., Vol. 23, pp. 999-1005,
1999.
19- S. Z. Shuja, B. S. Yilbas and M. O. Budair, “ Natural convection in a square
cavity with a heat generating body”, Accepted in Heat and Mass Transfer, 1999.
20- B. S. Yilbas, S. Z. Shuja, and M. O. Budair,” Second law analysis of a
swirling flow in a circular duct with restriction”, Int. J. Heat Mass Transfer,
Vol. 42. pp. 4027-4041, 1999.
21- S. Z. Shuja, B. S. Yilbas and M. O. Budair,” Gas jet impingement on a
surface having a limited constant heat flux area-various turbulence models”,
Numerical Heat Transfer, An International Journal of Computation and
Methodology, Part A, Vol. 36, No. 2, p. 171, 1999.
22- S. Z. Shuja, B. S. Yilbas, M. O. Iqbal, M. O. Budair, "Flow through a
protruding bluff body - heat and irreversibility analysis", Exergy - an
International Journal, Vol. 1(3), pp. 209-215, 2001. (Download
PDF)
23- B. S. Yilbas, S. Z. Shuja, and M. O. Budair, ”Nano-second pulse heating and
gas assisting jet considerations”, Intl. J. Machine Tools and Manufacture, Vol.
40, pp. 1023-1038, 2000. (Download
PDF)
24- M. O. Budair, “ Entropy analysis of unsteady flow on flat plate”, Int. J.
Energy Res., Vol. 25, pp. 519-524, 2001.
25- Syed M. Zubair, Anwar K. Sheikh, Muhammad Younas, M. O. Budair,” A risk
based heat exchanger analysis subject to fouling: Part I: Performance
evaluation”, Energy-The International Journal, Vol. 25, pp. 427-443, 2000. (Download
PDF)
26- Anwar K. Sheikh, Syed M. Zubair, Muhammad Younas, M. O. Budair,” A risk
based heat exchanger analysis subject to fouling: Part II- Economics of heat
exchangers cleaning”, Energy-The International Journal ,Vol. 25, pp. 445-461,
2000. (Download PDF)
27- S. Z. Shuja, B. S. Yilbas and M. O. Budair, “ Local entropy generation in an
impinging jet: Minimum entropy concept evaluating various turbulence models”,
Computer Methods in Applied Mechanics and Engineering , Vol. 190, No. 28, pp.
3623-3644, 2001.
28- M. O. Budair, “ Investigation into some aspects of fluid flow and thermal
analysis in annuli”, Int. J. Energy Res., Vol. 25, pp. 525-535, 2001.
29- S. Z. Shuja, B. S. Yilbas, M. O. Budair and I. S. Hussaini, “ Entropy
analysis of a flow past a heat-generated bluff body”, Int. J. Energy Res., Vol.
23, pp. 1133-1142, 1999.
30- S. Z. Shuja, B. S. Yilbas and M. O. Budair, “ Laser pulse heating of steel
surfaces including impinging gas effect and variable properties”, Int. J.
Numerical Methods for Heat & Fluid Flow, Vol. 12(2), pp. 195-219, 2002.
31- M.Mahmood, K.Srinivas, and M.O.Budair, “Computational of Flow past a
Low-rise Building” Computational Fluid Dynamics Journal, Vol. 9, 2001
(pp367-372).
32- M. O. Budair, A. Al-Qutub., “ An experimental investigation of
under-expanded super sonic jet flow impingement over an inclined plate”, In
progress.
33- M. S. Khan, M. O. Budair, S. M. Zubair,” A parametric study of CaCO3 scaling
in AISI 316 stainless steel tubes”, Heat and Mass Transfer, Vol. 38, pp.
115-121, 2001. (Download
DOC)
34- M. O. Budair, " Unsteady features of the flow around a finite circular
cylinder", In progress.
35- S. Z. Shuja, B. S. Yilbas, and M.O. Budair,”Vortex shedding over a
rectangular cylinder with ground effect: flow and heat transfer
characteristics”, Int. J. of Numerical Methods for Heat and Fluid Flow, Vol. 12,
pp. 916-939, 2002.
36- B. S. Yilbas, S. Z. Shuja, and M.O. Budair,”Jet impingement onto a cavity”,
Int. J. of Numerical Methods for Heat and Fluid Flow, Vol. 12, pp. 817-838,
2002.
37- B. S.Yilbas, S. Z. Shuja, and M. O. Budair, ”Jet impingement onto a hole
with constant wall temperature”, Numerical Heat Transfer, Part A, Vol. 43(8) pp.
843-865, 2003.
38- B. S. Yilbas, S. Z. Shuja, and M. O. Budair ,”Stagnation point flow over a
heated plate: consideration of gas jet velocity profiles”, Arabian Journal of
Science and Engineering, Vol. 27(2C) pp. 91-116, 2002.
39- B. S. Yilbas, S. Z. Shuja and M. O. Budair,
"Jet impingement onto a conical hole in relation to laser machining",
Journal of Materials Processing Technology, Volumes 155-156, 30 November
2004, Pages 2039-2044. (Download
PDF)
40- G. M. Arshed, S. Z. Shuja, B. S. Yilbas and M. O. Budair,
"Numerical investigation of a transient free jet resembling a laser-produced
vapor jet," International Journal of Heat and Mass Transfer, Volume 47, Issue 5,
February 2004, Pages 1037-1052 (Download
PDF) 41- Shuja, SZ, Yilbas, BS, Budair, MO, "Jet impingement onto a
limited-area heated plate: Conical nozzle considerations," J ENHANC HEAT TRANSF
12 (4): 301-313 OCT-DEC 2005 (Download PDF) 42- Shuja, SZ, Yilbas, BS, Budair,
MO,"Jet impingement onto a cylindrical cavity: consideration of annular nozzle
cone angles, and cavity diameter
INT J COMPUT FLUID D 19 (7): 483-492 OCT 2005 (Download
DOC) 43- Shuja, SZ, Yilbas, BS, Budair, MO, "Influence of conical and
annular nozzle geometric configurations on flow and heat transfer
characteristics due to flow impingement onto a flat plate" NUMER HEAT TR A-APPL
48 (9): 917-939 DEC 1 2005 (Download
DOC) 44-
|
|
