top1 top2 top3 top4
1. Method of Promoting Olefin Polymerization
Patent number: 88,188,199 B1
Inventors: Mamdouh Ahmad Al-Harthi, Abdul Kaleel Sulaiman Haniffa, Bijal Kottukkal Bahuleyan, Sadhan Kumar De, and Masihullah Jabarulla Khan
Patent number: 8,242,219 B1
Inventors: Mamdouh Ahmad Al-Harthi, Omer Bin Sohail, Sadhan Kumar De, Masihullah Jabarulla Khan
3. Method of Making High Density Polyethylene with Titania-Iron Nanofillers
Patent number: 8,541,520 B1
Inventors: Mamdouh Ahmad Al-Harthi, Mr. Omer Yahya Bakather, Dr. Sadhan Kumar De, Dr. Reyad Awwad Khalaf Shawabkeh
Patent number: 8,604,115 B1
Inventors: Mamdouh Ahmad Al-Harthi, Mr. Omer Yahya Bakather, Dr. Sadhan Kumar De, Dr. Reyad Awwad
Khalaf Shawabkeh
Patent number: 8,722,821 B1
Inventors: Mamdouh Ahmad Al-Harthi, Omer Bin Sohail, Sadhan Kumar De, Masihullah Jabarulla Khan
Patent number: 8,697,821 B1
Inventors: Mamdouh Al-Harthi, Omer Yahya Bakatheer, Sadhan Kumar De,
Patent number: 2015/0014253 A1
Inventors: Mousab Salah Aldeen Mirghani, Reyad Awwad Khalaf Shawabkeh, Naim Moh’d Abdallah Faqir,Mamdouh
Ahmed Al-Harthi, Mohamed Ba-Shammakh
Patent number: 2015/9145492
Inventors: Mamdouh A. Al-Harthi, Omer Yahya Bakatheer, Sadhan Kumar De, Reyad Shawabkeh
Patent number: 9,346,938 B1
Inventors: Mamdouh A. Al-Harthi, Osamah Bin-Dahman, Sadhan Kumar De, Jobin Jose
Patent number: 9,382,392
11. High-Density Polyethylene Preparation Methods
Inventor: Mamdouh Al-Harthi
U.S. Patent Number 9,688,836
top
J 1 . Mamdouh
A. Al-Harthi,
Kahraman, R.,
Yilbas, B., Sunar. M. and Abdul Aleem B. J., "Influence
of water immersion on the single-lap shear strength of
aluminum joints bonded with aluminum-powder-filled epoxy
adhesive"
Journal of Adhesion Science and
Technology,
18:15-16, 1699-1710 (2004).
J2. Kahraman,
R., Mamdouh
A. Al-Harthi,
"Moisture
diffusion into aluminium powder-filled epoxy adhesive in
sodium chloride solutions"
International Journal of
Adhesion & Adhesives,
25, 337-341 (2005).
J3. Mamdouh
A. Al-Harthi,
J. Soares, L. Simon, "Mathematical Modeling of
Atom-Transfer Radical Polymerization Using Bifunctional
Initiators"
Macromol.
Theory Simul, 15, 198-214, (2006).
J4. Mamdouh
A. Al-Harthi,
J. Soares, L. Simon, "Modeling of Atom Transfer Radical
Polymerization with Bifunctional Initiators: Diffusion
Effects and Case Studies"
Macromol. Chem.
Phys., 207, 469-483,
(2006).
J5.
Mamdouh
A. Al-Harthi, J. Soares, L. Simon, "Dynamic Monte
Carlo Simulation of Atom-Transfer Radical
Polymerization"
Macromol. Mat. Eng.., 291, 993-1003, (2006).
J6. Mamdouh
A. Al-Harthi,
J. Soares, L. Simon, "Dynamic Monte Carlo Simulation of
Graft Copolymers Made with ATRP and Metallocene
Catalysts" Macromolecular Symposia, 243, 83-90, (2006).
J7. Mamdouh
A. Al-Harthi,
J. Soares, L. Simon, "Dynamic
Monte Carlo Simulation of ATRP with Bifunctional
Initiators"
Macromol.
Reac. Eng., 1. 95-105,
(2007).
J8. Mamdouh
A. Al-Harthi,
L.Cheng,
J. Soares,
L. Simon "Atom-Transfer Radical Polymerization of
Styrene with Bifunctional and Monofunctional Initiators:
Experimental and Mathematical Modeling Results"
Journal of Polymer Science, Part A: Polymer Chemistry,
45(11), 2212, (2007).
J9. Mamdouh
A. Al-Harthi,
A. Sardashti, J. Soares, L. Simon,
"Atom transfer radical polymerization (ATRP) of
styrene and acrylonitrile with monofunctional and
bifunctional initiators"
Polymer, 48(7),
1954-1961, (2007).
J10. Mamdouh
A. Al-Harthi,
J. Soares, L. Simon "Mathematical Modeling of Atom-
Transfer Radical Copolymerization"
Macromolecular
Reaction Engineering,
1(4),
468-479,
(2007).
J11. Kahraman, Ramazan;
Mamdouh A. Al-Harthi; Loughlin, Kevin. "Concentration
Dependence of Moisture Diffusivity in Aluminum Particle
Filled Epoxy Adhesive in Salt Solutions"
Journal of Adhesion,
83(3), 183, (2007).
J12. Mamdouh
A. Al-Harthi;
Kahraman, Ramazan; Loughlin, Kevin.
"Moisture diffusion into epoxy adhesive: testing
and modeling"
Adsorption, 13, 115-120, (2007).
J13. Mamdouh
A. Al-Harthi,
Khan, Masihullah, S. Abbasi, JBP Soares,
"Dynamic Monte
Carlo Simulation of ATRP in a Batch Reactor"
Macromolecular Theory and Simulation, 18 (6), 307-316,(2009).
J14.
Mamdouh
A. Al-Harthi, Khan, Masihullah,
S. Abbasi, JBP Soares,
"Gradient
Copolymers by ATRP in Semibatch Reactors: Dynamic Monte
Carlo Simulation" Macromolecular Reaction Engineering,
4, 148-159, (2009).
J15. Muataz Ali Atieh, Nazif Nazir,
Faridah Yusof, Mohammed Fettouhi, Chantara Thevy Ratnam,
Mamdouh A. Al-Harthi, Faraj A. Abu-Ilaiwi, Khalid
Mohammed, Adnan Al-Amer.
"Radiation Vulcanization of Natural
Rubber Latex Loaded with Carbon Nanotubes"
Journal of Fullerenes, Nanotubes and
Carbon Nanostructures, 18, 56-71 1,
(2010).
J16. Muataz, O. Y. Bakather, B. S.
Tawabini, A. A. Bukhari, M. Khaled,
Mamdouh
A. Al-Harthi, M. Fettouhi, and F. A. Abuilaiwai
“Removal of Chromium (III) from Water by Using Modified
and Nonmodified Carbon Nanotubes”
1-9 Journal of
Nanomaterials
doi:10.1155/2010/232378
(2010).
J17. Abdul-Lateef,
Mamdouh
A. Al-Harthi, and A. A. Muataz “Effect of Multi-Walled
Carbon Nanotubes on the Mechanical and Thermal
Properties of Natural Rubber”
The Arabian Journal for
Science & Engineering 35, 1C, P.49,
(2010).
J18. A. Abuilaiwi, T. Laoui,
Mamdouh A. Al-Harthi
and A. A. Muataz “Modification and
Functionalization of Multiwalled Carbon
Nanotube
(MWCNT) Via Fischer Esterification”
The Arabian
Journal for Science & Engineering 35, 1C, P. 37-48,
(2010).
J19. Saeed
al-Ghamdi, Mamdouh A. Al-Harthi, and Reyad Shawabkeh,
"Synthesis
and Characterization of Microporous, High Surface Area
Activated Carbon from Palm Seeds",
Energy
Sources, Part A: 36, 93-103,
2014
J20. Mamdouh
A. Al-Harthi
"Stochastic
Model for Living Radical Polymerization
of Styrene Initiated by Epoxide Radical Ring
Opening"
Canadian Journal of Chemical
Engineering,
89, 2, 384-391,
(2011).
J22.
Mamdouh A. Al-Harthi, Abdul Kaleel S.HH, Bijal Kottukkal Bahuleyan and
Masihullah J. “Thermal and Mechanical properties of
Polythylene/doped-TiO2 nanocomposites sythesized using
in-situ polymerization”
Journal of Nanomaterials,
doi:10.1155/2011/964353, (2011).
J.23.
Selvin Thomas P, A Abdullateef,
Mamdouh A. Al-Harthi, De S K, Bandyopadhyay S, Basfar A A, and Atieh M A,
“Effect of phenol functionalzation of
carbon nanotubes
on
properties of natural rubber nanocomposites”
Journal of
Applied Polymer Science
124, 3,
2370-2376,
(2012).
J24.
Abdulateef AA, Selvin Thomas P,
Mamdouh A. Al-Harthi,
De SK, Bandyopadhayay S, Basfar AA, and Atieh MA,
“Natural
rubber nanocomposites with functionalized carbon
nanotubes: mechanical, dynamic mechanical and morphology
studies”
Journal of Applied Polymer Science, E76-84,
DOI 10.1002/app.35021,
(2012).
J25. Sreekumar P.A.; Mamdouh
A.
Al-Harthi, Sadhan Kumar De
"Effect of
Glycerol on Thermal and Mechanical Properties of
Polyvinyl Alcohol/Starch Blends”
Journal of
Applied Polymer Science 123, 135-142,
(January ,
2012).
J26.
Muhammad
Atiqullah, Ikram Hussain,
Mamdouh A. Al-Harthi,
Masiullah Jabarulla Khan, Anwar Hossaen, Atif Fazal
“Changes
in melting behaviors of a residual catalyst-cum-UV
degraded polyethylene film: A new insight through
experiments and modeling”
Current Catalysis,
1, 2-13, (2012).
J27.
Bijal Kottukkal Bahuleyan, Muataz Ali Atieh, Sadhan Kumar De,
Masihullah J, and
Mamdouh A. Al-Harthi
“ Easy one-pot method to control
the morphology of polyethylene/carbon nanotube
nanocomposites using metallocene catalysts”
Journal of Polymer research, Vol. 19, No. 2., 1-8, (2012).
J28.
Sreekumar P.
Appu, Mamdouh A. Al-Harthi
and
SK DE
“Reinforcement of
starch/polyvinyl alcohol blend using nano-titanium
dioxide”,
Journal of
Composite Materials 46,25, 3181-3187
(2012).
J29. Housam Binous,
Mamdouh
A.
Al-Harthi,
"Simple Batch Distillation of a Binary Mixture",
Computer Applications in Engineering Education, DOI
10.1002/cae.21556, (February 15, 2012).
J30.
Selvin Thomas P, Adedigba
A Abdullateef,
Mamdouh A. Al-Harthi, Muataz A Atieh, S.K. De,
Mostafizur Rahaman. T.K. Chaki, D. Khastgir, Sri
Bandyopadhyay “Electrical Properties of Natural Rubber
Nanocomposites: Effect of 1-Octadecanol
Functionalization of Carbon Nanotubes”
Journal of
Materials Science
47,
7, 3344-3349, (2012).
J31. Sreekumar P.A., S.K. De, Masihullah Jabarullah
Khan, Mamdouh A. Al-Harthi “Natural weather ageing
of starch/polyvinyl alcohol blend: effect of glycerol
content”, Journal of Polymer
Engineering,
33,3
257-263, (2012).
J32.
Bijal Kottukkal
Bahuleyan, S. K. De, P. U. Sarath, Sarfaraz Ahmed
Furquan, J Masihullah, Abdul Hamid Emwas,
Mamdouh A.
Al-Harthi “Effect of Aluminum Nitride on the
Properties of Polyethylene Obtained by In situ
Polymerization using Ni(II) Diimine Complex’
Journal of
Macromolecular Research,
20,7, 772-775
(2012).
J33. M. Atiqullah, M.S. Winston, J.E.
Bercaw, I. Hussain, A. Fazal,
Mamdouh
A.
Al-Harthi,
A.-H.M. Emwas, M.J. Khan,
A. Hossaen,
"Effects of a vanadium post-metallocene
catalyst-induced polymer backbone inhomogeneity on UV
oxidetive degradation of the resulting polyethylene
film". Polymer Degradation and Stability, 97 1164
-1177, (2012).
J34. Omer BinSohail, P.A.Sreekumar, S.K. De,
Masihullah Jabarullah Khan, Abbas Hakeem, Ahmad
A.Alshaiban, and Mamdouh A. Al-Harthi, “Thermal
Effect of Ceramic Nanofiller Aluminum Nitride on
Polyethylene Properties”, Journal of Nanomaterials,
doi:10.1155/2012/250364, (2012)
J35.
S.H. Abdul Kaleel, Bijal Kottukkal Bahuleyan, S.K. De,
Masihullah Jabarulla Khan, Rachid Sougrat,
Mamdouh
A. Al-Harthi “Effect
of Mn doped-titania on the activity of metallocene
catalyst by in-situ ethylene polymerization” Journal of
Industrial and Engineering Chemistry, 18, 1836-1840,
(2012)
J36. P A, Sreekumar;
Mamdouh A.
Alharthi, S.K De “Studies on Compatibility of
Biodegradable Starch/Polyvinyl Alcohol Blends”
Journal of Polymer Engineering and Science.
52,
2167–2172, (2012)
J37. Muhammad Atiqullah, Mohammad M. Hossain,
Muhammad S. Kamal, Mamdouh
A.
Al-Harthi,
Masiullah J.
Khan,
Anwar Hossaen,
and
Ikram Hussain“Crystallization Kinetics of
PE-b-isotactic PMMA Diblock Copolymer Synthesized Using
SiMe2 (Ind)
2ZrMe2 and
MAO Cocatalyst”, Journal of AIChE,
Vol.
59, No. 1, 200-214
(2013)
J38. Ruhul M. Amin, Sreekumar P.A.,
Mamdouh
A. Al-Harthi, S. K. De, Basel F. Abu-Sharkh, “Natural
weather ageing of the low-density polyethylene: Effect
of Polystarch N”
Journal of Applied Polymer Science,
127,
2, 1122–1127, 2013 (2013)
J39. P.A. Sreekumar, Mamdouh A.
Al-Harthi, Mohammad
A. Gondal, and S.K. De, “Heterogenity of laser
irradiated films of polyvinyl alcohol/starch blends:
Effect of glycerol content”
Surface and Interface Analysis, 45, 6, 1047–1051, (2013)
J40.
Muhammad Shahzad Kamal,
Bijal Kottukkal Bahuleyan, Omer Bin Sohail,
Abdul-Hamid M. Emwas, John E. Bercaw and
Mamdouh A. Al-Harthi, “Crystallization
analysis fractionation of poly(ethylene-co-styrene)
produced by metallocene catalysts”
Polymer Bulletin,
70:2645–2656,
(2013)
J41. M. Elanmugilan, P.A. Sreekumar, N.K. Singha,
Mamdouh A.
Al-Harthi, S. K. De. "Natural Weather, Soil Burial
and Sea Water Ageing of Low density polyethylene: Effect
of Starch/Linear low density polyethylene masterbatch",
Journal of Applied Polymer Science,
129, 1,
449–457, (2013)
J42. Omer Bin Sohail, Masihullah Jabarulla Khan, P A, Sreekumar;
Mamdouh A. Al-Harthi, “Effect of Ceramic
Nanofiller Silicon Nitride (SiN) on Polyethylene
Productivity and Properties”
Polymer Engineering and
Science,
DOI:
10.1002/pen.23744
(2013)
J43
M. Elanmugilan, P.A. Sreekumar, N.K. Singha,
Mamdouh
A.
Al-Harthi, S. K. De. “Ageing of low density
polyethylene in Natural Weather, Underground Soil aging
and Sea Water: Effect of a starch-based
prodegradant
additive”,
Polymer Engineering Science,
53, 11, 2389–2397, (2013)
J44 Muhammad Atiqullah, Siripon
Anantawaraskul, Abdul-Hamid Emwas,
Mamdouh
A.
Al-Harthi,
Ikram Hussain, Anwar Ul-Hamid, Anwar Hossaen,
“Effects of Supported (nBuCp)2ZrCl2
Catalyst Active Center Distribution on Ethylene-1-hexene
Copolymer Backbone Heterogeneity and Thermal Behaviors",
Industrial & Engineering Chemistry Research,
52, 9359-9373 (2013)
J45
Yin Chen, Raffaele Credendino,
Emmanuel Callens, Muhammad Atiqullah, Mamdouh
A. Al-Harthi, Luigi Cavallo and Jean-Marie Basset,
“Understnading of Tantalum-Catalyzed Ethylene
Trimerization: When Things go wrong”,
ACS Catalysis,
3 (6)
1360–1364, (2013)
J46.
Muhammad Atiqullah, Saqir Adamu, Mohammad Mozahar
Hossain,
Mamdouh
A.
Al-Harthi, Siripon Anantawaraskul,
and Anwar Hossaen
“Effects of supported (nBuCp)2ZrCl2
catalyst active center multiplicity on crystallization
kinetics of ethylene homo- and copolymers”,
Journal of
the Taiwan institute of chemical Engineering,
http://dx.doi.org/10.1016/j.jtice.2013.11.005
,(2013)
J47.
Mamdouh
A.
Al-Harthi “Influence of
applying microwave radiation on the LDPE/MWCNTs
Nanocomposite", Polymer Composites,
35,10, 2036-2042, (2014).
Ethylene-1-hexene Copolymerization”, Polymer International, 63, 6, 955-972, (2014)
J49. Farrukh Shehzad, Selvin P. Thomas, Mamdouh A. Al-Harthi "Non-Isothermal Crystallization Kinetics of High Density Polyethylene/Graphene Nanocomposites Prepared By In-situ Polymerization" Thermochimica
Acta, 589, 226-234, (2014)
J50. Omar Yahya Bakatheer, Mamdouh
A. Al-Harthi “Effect of titania nanofiller on the
productivity and crystallinity of ethylene and propylene
copolymer”, Journal of Polymer Engineering 34, 9,
829–837, (2014)
J51. Mukarram Zubair, Jobin Jose, Abdul-Hamid Emwas,
Mamdouh A. Al-Harthi, , “Effect of Modified Graphene and Microwave Irradiation on the Mechanical and Thermal properties of Poly(styrene-co-methyl methacrylate)/Graphene Nanocomposites”, Surface Interface Analysis, 46, 630-639, (2014)
J52. Jobin Jose, Farrukh Shehzad, Mamdouh A. Al-Harthi, “Preparation method and physical, mechanical, thermal characterization of Poly(vinyl alcohol)/Poly(acrylic acid) blends", Polymer Bulletin,
71, 11, 2787-2802, (2014)
J53. Mamdouh
A. Al-Harthi,
“Effect of Calcium Zirconate Nanofiller on
Polyethylene Productivity and Properties”, Journal of
Polymer Research,
21, 529,
DOI 10.1007/s10965-014-0529-x -25,
(2014).
J54. Jobin Jose, S. K. De, Mariam Al-Ali AlMa’adeed, Jolly Bhadra Dakua,
, P A Sreekumar, Rachid Sougrat, and Mamdouh A.
Al-Harthi, “Compatibilizing role of Carbon Nanotubes
in Poly(vinyl alcohol)/Starch Blend” Starch,
66,
1-7,
147–153, (2014)
J55. Muhammad Atiqullah, Zuzana
Cibulková, Andrea Černá, Peter Šimon, Ikram Hussain, Mamdouh
A. Al-Harthi, Siripon Anantawaraskul, “Effects of
supported metallocene catalyst active center
multiplicity on antioxidant-stabilized ethylene homo-
and copolymers”, Journal of Thermal Analysis and
Calorimetry 10.1007/s10973-014-4167-7,
(2014)
J56.
Elanmugilan M, Sreekumar P.A, Nikhil Singha, Sadhan Kumar De, Mamdouh Al-Harthi, “Natural weather ageing of low density polyethylene: Effect of pro-degradant additive”, Plastics, Rubber and Composites: Macromolecular Engineering, 43, 10, 347-353, (2014)
J57. P.A. Sreekumar, M. Elanamugilan; N.K. Singha; Mamdouh A. Al-Harthi, Sadhan Kumar De; Abdulhadi Al-Juhani, “LDPE Filled with LLDPE/Starch Masterbatch: Rheology, Morphology, and Thermal Analysis” Arabian Journal for Science and Engineering, DOI 10.1007/s13369-014-1467-y, (2014)
J58. Muhammad Atiqullah,
Mamdouh A. Al-Harthi, Siripon Anantawaraskul and Abdul-Hamid M. Emwas,“Ethylene Homo- and Copolymerization Chain-transfers: A Perspective from Supported (nBuCp)2ZrCl2 Catalyst Active Center Distribution’ Journal of Chemical Sciences, Vol. 127, No. 4, (2015), pp. 717-728.
J59. Jobin Jose, Mamdouh A. Al-Harthi, Mariam Al-Ali AlMa’adeed, Jolly Bhadra Dakua and Sadhan K De, “Effect of Graphene loading on Thermomechanical Properties of Poly(Vinyl Alcohol)/Starch Blend”, Journal of Applied Polymer Science Volume 132, Issue 16, (2015).
J60. Omer Yahya Bakather, and Mamdouh A.
Al-Harthi,
Synthesis and
Properties of Polyethylene/TiO2 Nanocomposites Using a
Vanadium Catalyst, Canadian Journal of Chemical
Engineering
(In Press 2015)
J61.
Muhammad Daud,
Farrukh Shehzad,
Mamdouh A. Al-Harthi, “Non-Isothermal
Crystallization Kinetics of LLDPE Prepared by In-Situ
Polymerization in the Presence of Nano Titania”,
Polymer Bullettin, 72, 5, 1233-1245, (2015)
J62.
Ahmed Bellagi,
Mamdouh A. Al-Harthi,
Housam Binous, “From the Distillation of Chemical
Compounds to the Distillation of Knowledge”, Journal
of Computer Education in Engineering Education (In
Press 2015).
J63.
Mamdouh A. Al-Harthi,
“Highlight on the Mathematical Modeling of Controlled
Free Radical Polymerization”
International Journal of
Polymers, Volume 2015,
Article ID 469353, 12 pages (2015)
.
J64. Mukrahm Subair, Jobin
Jose, Mamdouh Al-Harthi, “Evaluation
of mechanical and thermal properties of microwave
irradiated Poly (styrene-co-methyl methacrylate)/
Graphene nanocomposites””
Composite Interfaces,
Volume 22, Issue 7,
(2015).
J66.
Farrukh Shehzad, Muhammad Daud,
Mamdouh A. Al-Harthi1, “Synthesis,
characterization and crystallization kinetics of
nanocomposites prepared by in-situ polymerization of
ethylene and graphene”, Journal of Thermal Analysis
and Calorimetry,
(In
Press 2015).
J67.
Sagir, A.; Daud, M.; Zuhair, O.M.; Al-Harthi, M.;
Atiqullah, M.: “Metallocene-catalyzed
ethylene-<alpha>-olefin isomeric copolymerization: A
perspective from hydrodynamic boundary layer mass
transfer and design of MAO anion” Journal of the Taiwan
Institute of Chemical Engineers,
60, 92-105,
2016.
J68. Muhammad Atiqullah, Sagir Adamu; Zuhair Omar
Malaibari; Mamdouh Ahmed Al-Harthi; “Abdelhamid Emwas
(nBuCp)2ZrCl2-catalyzed Ethylene-4M1P Copolymerization:
Backbone Structure, Melt Behavior, and Crystallization”,
AIChE Journal, 62, 5, 1688-1706, 2016
J69. Daud, M.; Farrukh, S.; Kamal, S.; Mamdouh
Al-Harthi, “Graphene/Layered Double Hydroxides
Nanocomposites: A Review of Recent Progress in Synthesis
and Applications”, Carbon, 104, 241-252, 2016
J70.
Mukarram Zubair,
Farroukh Shahzad,
Mamdouh A. Al-Harthi: Impact of modified graphene
and microwave irradiation on thermal stability and
degradation mechanism of poly (styrene-co-methyl meth
acrylate), Thermochimica Acta
http://www.sciencedirect.com/science/article/pii/S004060311630056,
2016
J71. Osamah Bindahman, Jobin Jose, Mamdouh Al-Harthi, “Effect of Natural Weather Aging on the Properties of Poly (vinylalcohol)/Starch/ Graphene Nanocomposite" Starch, DOI: 10.1002/star.201600005 (2016)
J72. Aluthge Dinesh, Sattler Aaron, Mamdouh Al-Harthi, Labinger Jay, Bercaw John, "Co-supported tandem catalysts for production of linear low density polyethylene from an ethylene-only feed", ACS Catalysis, 6 (10), 6581–6584 (2016).
J73. Muhammad Daud, Farrukh Shehsad, Mamdouh Al-Harthi, “ Crystallization behavior and lamellar thickness distribution of metallocene-catalyzed polymer: Effect of 1-alkene comonomer and branch length”, Canadian Journal of Chemical Engineering,95, 3, 491-499, March, (2017)
J74. Mukarram Zubair, Nabeel Jarrah, Mohammad Saood Manzar, Mamdouh Al-Harthi, Muhammad Daud, Nuhu Dalhat Mu’azu, Shamsuddeen A. Haladu, “Adsorption of Eriochrome Black T from Aqueous Phase on MgAl-, CoAl- and NiFe- Calcined Layered Double Hydroxides: Kinetic, Equilibrium and Thermodynamic Studies”, Journal of Molecular Liquids, 230, 3404-352, (2017).
J76. Mohammad, Ruhul Amin, Mamdouh Al-Harthi, Imran, Syed Muhammad, Hussain, Manwar Hussain, Manwar, “Effect of nanoparticles on mechanical and flame retardant properties of polyether-block-polyamide polymer nanocomposite”, Polymer-Plastics Technology and Engineering. (2017). http://dx.doi.org/10.1080/03602559.2017.1300814
J77. Mukarram Zubair, Nabeel Jarrah, Mohammad Saood Manzar , Mamdouh A Al-Harthi, Nuhu Dalhat Mu’azu “Highly efficient removal of Pb (II) ion from aqueous phase using surface modified graphene, equilibrium and kinetic study”. Desalination and Water Treatment", In press (2017).
J78. Mukarram Zubair, Muhammad Daud, Gordon McKay, Farrukh Shehzad, Mamdouh A. Al-Harthi, “Recent progress in layered double hydroxides (LDH)-containing hybrids as adsorbents for water remediation”, Applied Clay Science, 143, 279-292, (2017).
J79. Jobin Jose, Mamdouh Al-Harthi, “Citric Acid Crosslinking of Poly(vinyl alcohol) (PVA)/starch/graphene Nanocomposites for superior properties” Iranian Polymer Journal, 26:579–587 (2017).
J80. Osamah A. Bin-Dahman, Mostafizur Rahaman, Dipak Kastigar, Mamdouh A. Al-Harthi,"Electrical and dielectric properties of poly(vinyl alcohol)/starch/graphene nanocomposites”, Canadian Journal of Chemical Engineering (In Press), (2017)
J81. Abdullah K. Ahmed, Muhammad Atiqullah, Dev R. Pradhan, Mamdouh A. Al-Harthi, “Crystallization and Melting Behavior of i-PP: A Perspective from Flory’s Thermodynamic Equilibrium Theory and DSC Experiment”, RSC Advances, (In Press), (2017).
J82. Ihsan Ullah,Taye Shaheed Kazeem, ukarram Zubair, Arsalan Khalid, Mamdouh Alharthi, Mohammad Saood Manzar, Nabeel Jarrah, “Starch-NiFe- layered double hydroxide composites: Efficient removal of methyl orange from aqueous phase” Journal of Molecular Liquids, (In Press), (2017).
Conference presentation with referred Full Paper Proceedings
C1. Kahraman, R. and Mamdouh A. Al-Harthi, “Influence of Moisture Sorption and Filler Content on the Performance of Aluminum Joints Bonded by Aluminum Filled Epoxy”, First International Conference on: Applications of Traditional and High Performance Materials in Harsh Environments, American University of Sharjah, Sharjah, United Arab Emirates, January, 20-22, 2004.
C2. Mamdouh A. Al-Harthi; Leonardo, Simon; Joao Soares. “Mathematical Model for Controlled Free Radical Polymerization Using Multimodal Initiators”. 55th Canadian Chemical Engineering Conference. Toronto, Canada. 16-19 October 2005.
C3. Kahraman, R., Mamdouh A. Al-Harthi, and Loughlin, K., "Testing and Modeling of Moisture Diffusion into Aluminum Particle Filled Epoxy Adhesive", Thirteenth International Conference of Experimental Mechanics (ICEM13), Alexandroupolis, Greece, July 1-6, 2007.
C4. Mamdouh A. Al-Harthi; Leonardo, Simon; Joao Soares. “Mathematical model for block and random copolymers using ATRP”. 3rd Eurepean Conference on the Reaction Engineering of Polyolefins. Lyon, France. 20-24 June 2005.
C5. Mamdouh A. Al-Harthi; Leonardo, Simon; Joao Soares. “Dynamic Monte Carlo Simulation of Atom Transfer Radical Polymerization”, Polymer Reaction Engineering VI May 21-26, Halifax, Nova Scotia, Canada, 2006.
C6. Mamdouh A. Al-Harthi; Leonardo, Simon; Joao Soares. “Dynamic Monte Carlo Simulation of Graft Copolymers Made With ATRP and Metallocene Catalysts”,. Polymer Reaction Engineering VI May 21-26, Halifax, Nova Scotia, Canada 2006.
C7. Kahraman, R., Mamdouh A. Al-Harthi, M. and Loughlin, K., “Testing and Modeling of Moisture Diffusion into Aluminum article Filled Epoxy Adhesive" Seventh International Conference on composite Science and Technology, Sharjah, UAE, Jan 20-22, 2009.
C8. Mamdouh A. Al-Harthi “Effect of Diffusion Controlled Equilibrium Reactions on Atom Transfer Radical Copolymerization” 8th World Congress of Chemical Enigeering, Monteal, QC, Canada, August 23-27, 2009.
C9. Mamdouh A. Al-Harthi, Z. H. Khokhar, S. Abbasi, and Joao Soares, “Dynamic Monte Carlo Simulation of Chain Shuttling Polymerization”, 10th Annual UNESCO / IUPAC Conference on Macromolecules & Materials, Mpumalanga, South Africa, Sep., 7-11,2008.
C10. Mamdouh A. Al-Harthi, Z. H. Khokhar, and S. Abbasi, “Mathematical modeling of living radical polymerization of styrene initiated by epoxide radical ring opening", 10th Annual UNESCO / IUPAC Conference on Macromolecules & Materials, Mpumalanga, South Africa, Sep., 7-11, 2008.
C11. Issam Amr, Muataz Ali Atieh, Khaled Mezghani, Mamdouh A. Al-Harthi, and Adnan Al-Amer; “Effect of Hydrogen Flow rate and Carbon Source on Production of Carbon Nanotubes by Chemical Vapor Deposition”; International Conference on Materials for Advanced Technologies - ICMAT 2009; June 28 - July 3, 2009; Singapore.
C12. Mutaz Ali Atieh, Issam Amr, Adnan Al-Amer, Mamdouh A. Al-Harthi and Khaled Mezghani; The Role of Reaction Temperature on the Growth of Carbon Nanomaterials; Trends in Nano Technology – TNT 2009 International Conference; September 7 - 11, 2009; Barcelona, Spain.
C13. Reyad A. Shawabkeh, Musab Gaily, Tahir Laui, Naim Faqir, Mamdouh A. Al-Harithi, Mohammad Ba-Shammakh Synthesis and Characterization of Fe-doped Nanotitania Using Sol-Gel Technique and Application for Zn2+ Reduction from Aqueous Solution.; 9th International Conference on Advances and trends in Engineering materials and their applications at Montreal, Canada, August 01-05, 2011.
C 14. Reyad A. Shawabkeh, Musab Gaily, Tahir Laui, Naim Faqir, Mamdouh A. Al-Harithi, Synthesis of VTiO2 nanoparticles and application for reduction of Co2 + from Aqueous solution?. 6th Internation conference on environmental science and technology, Houston, Texas, USA June 25-29, 2012.
C15. Housam Binous, Mamdouh A. Al-Harthi, “Experimental and Theoretical Study of Multicomponent Batch Distillation " AICHE, 2015 Annual Meeting.
C16. Naim Faqir, Mamdouh A. Al-Harthi, Abdulwahab H., Al-Shaaer, M., R. Shawabkeh, “Fabrication of Low Cost Insulating Material from Kaolin Clay for Construction Purposes”, AIChE Spring Meeting, 2014 and 10th Global Congress on Process Safety (ISBN: 978-0-8169-1083-0)
“MATLAB Programming of Polymerization Processes Using
Montecarlo Techniques” Applications of Monte Carlo Method in
Science and Engineering, edited by Shaul Mordechai Page
841-856, InTech.