Publications

Refereed Journal Papers:
(with citation record: excluding self-citations of ALL authors)

  1. Sharif, M. N., Abudhier, N., and Khan, S. M. A. "Effect of grain size on microforming of Brass sheets", submitted.

  2. Khan, S. M. A., "Interaction of extrinsic dislocations with geometrically necessary dislocation boundaries using multiscale modeling", under preparation.

  3. Zafar, H., Khan, S. M. A. and Levine, L. E., "Dislocation structure evolution during nano-indentation using multi-scale discrete dislocation plasticity analysis", under preparation.

  4. Khan, S. M. A., "Multi-scale modeling of dislocation boundaries: An overview", submitted.

  5. Toor, I., and Khan, S. M. A., "Structural defects and optical properties of metal chalcogenide semiconductor nanostructures", Book chapter; under review.

  6. Al-Shahrani, R. F., Merah, N., Al-Nassar, Y. and Khan, S. M. A., "Impact Loading Analysis of Glass Fiber Reinforced Epoxy Pipes", submitted.

  7. Saeed, A., Adnan, A., Bokhari, A., Rafique, H.M., Khan, S. M. A., and Qureshi, F. A., "Corrosion behaviour of Al-Zn-Mg alloy in highly acidic solutions and the effect of a corrosion inhibitor", submitted.

  8. Khan, S. M. A., Merah, N. and Adinoyi, M. J., "3D effects on crack front core regions, stress intensity factors and crack initiation angles", Int. J. Solids & Struct., vol. 50(9), pp. 1449-1459, 2013. (cited by 1) Abstract

  9. Khan, S. M. A., "Crack front fields in a mixed mode I-II single edge-notched tension specimen: Effect of the thickness", Struct. Eng. Mech., vol. 42, pp. 701-713, 2012. Abstract

  10. Arif, A. F. M., Al-Nassar, Y.N., Al-Qahtani, H., Khan, S. M. A., Anis, M., Eleiche, A. S., Inam, M., Al-Nasri, N. and Al-Muslim, H. M., "Optimization of Pipe Repair Sleeve Design", in press; ASME Journal of Pressure Vessel Technology. Abstract

  11. Albinmousa, J., Merah, N. and Khan, S. M. A., "A model for calculating geometry factors for a mixed-mode I-II single edge notched tension specimen", Technical Note, Eng. Fracture Mech., vol. 78, pp. 3300-3307, 2011. (cited by 1) Abstract

  12. Khan, S. M. A., "Stress distributions in a horizontal pressure vessel and the saddle supports", Int. J. Pressure Vessels & Piping, vol. 87, pp. 239-244, 2010. (cited by 2) Abstract

  13. Yilbas, B. S., Khan, S. M. A., Raza, K., Keles, O., Ubeyli, M., Demir, T. and Karakas, M. S., "Laser cutting of 7050 Al alloy reinforced with Al2O3 and B4C composites", Int. J. Adv. Manuf. Tech., vol. 50, pp. 185-193, 2010. (cited by 2) Abstract

  14. Khan, S. M. A., and Khraisheh, M. K., "The anisotropic R-criterion for crack initiation", Eng. Fracture Mech., vol. 75, pp. 4257-4278, 2008. (cited by 8) Abstract

  15. Yilbas, B. S., Shuja, S. Z., Khan, S. M. A., and A. Aleem "Laser melting of carbide tool surface: Model and experimental studies" Applied Surface Science, vol. 255, pp. 9396-9403, 2009. (cited by 5) Abstract

  16. Khan, S. M. A., Zbib, H. M., and Hughes, D. A., "Modeling planar dislocations boundaries using multi-scale dislocation dynamics plasticity", Int. J. Plasticity, vol. 20, pp. 1059-1092, 2004. (cited by 15) Abstract

  17. Khan, S. M. A., and Khraisheh, M. K., "A new criterion for mixed mode fracture initiation based on the crack tip plastic core region", Int. J. Plasticity, vol. 20, pp. 55-84, 2004. (cited by 28) Abstract

  18. Zbib, H. M., Shehadeh, M., Khan, S. M. A., and Karami, G., “Multiscale dislocation dynamics plasticity”, Int. J. Multiscale Comp. Eng., vol. 1(1), pp. 73-89, 2003. Abstract

  19. Hughes, D. A., Khan, S. M. A., Godfrey, A., and Zbib, H. M., "Internal structures of deformation induced planar dislocation boundaries", Materials Science and Engineering A, vol. 309-310, pp.220-226, 2001. (cited by 11) Abstract

  20. Khan, S. M. A., and Khraisheh, M. K., "Analysis of mixed mode crack initiation angles under various loading conditions", Eng. Fracture Mech., vol. 67, pp. 397-419, 2000. (cited by 45) Abstract

  21. Yilbas, B. S., Shuja, S. Z. and Khan, S. M. A., "Laser repetitive pulse heating of tool surface" Optics Laser Tech., vol. 43, pp. 754-761, 2011. (cited by 3) Abstract

  22. Shuja, S. Z., Yilbas, B. S., and Khan, S. M. A., " Laser consecutive pulse heating in relation to melting: Influence of duty cycle on melting" Heat & Mass Transfer, vol. 45, pp. 793-803, 2009. Abstract

  23. Shuja, S. Z., Yilbas, B. S., and Khan, S. M. A., " Laser consecutive pulse heating and phase change: Influence of spatial distribution of laser pulse intensity on melting" Int. J. Thermal Sciences, vol. 48, pp. 1960-1966, 2009. (cited by 1) Abstract

  24. Shuja, S. Z., Yilbas, B. S., and Khan, S. M. A., "Flow emerging from annular-conical nozzle combinations and impinging onto a cylindrical cavity" Int. J. Thermal Sciences, vol. 48, pp. 975-984, 2009. Abstract

  25. Shuja, S. Z., Yilbas, B. S., and Khan, S. M. A., "Jet impingement onto a conical cavity: Effects of annular nozzle outer angle and jet velocity on heat transfer and skin friction" Int. J. Thermal Sciences, vol. 48, pp. 985-997, 2009. (cited by 3) Abstract

  26. Shuja, S. Z., Yilbas, B. S., and Khan, S. M. A., "Jet impingement onto a tapered hole: influence of jet velocity and hole wall velocities on heat transfer and skin friction" Int. J. Numerical Methods in Fluids, vol. 60, pp. 972-991, 2009. Abstract

  27. Shuja, S. Z., Yilbas, B. S., and Khan, S. M. A., "Flow over solid blocks in open ended cavity: Effects of block’s orientations and aspect ratios on the heat transfer rates" Numerical Methods for Heat & Fluid Flow, vol. 19, pp. 633-649, 2009. (cited by 1) Abstract

  28. Shuja, S. Z., Yilbas, B. S., and Khan, S. M. A., "Jet emerging from an annular nozzle and impinging onto cylindrical cavity: Effect of jet velocity on flow structure and heat transfer rates", Proc. Inst. Mech. Engrs. Part C: J. Mechanical Eng. Sci., vol. 222, pp. 1021-1031, 2008. (cited by 2)  Abstract

  29. Shuja, S. Z., Yilbas, B. S., and Khan, S. M. A., "Flow subjected to porous blocks in the cavity: Consideration of block aspect ratio and porosity", Chemical Engrg J., vol. 139, pp. 84-92, 2008. (cited by 4) Abstract

  30. Shuja, S. Z., Yilbas, B. S., and Khan, S. M. A., "Laser heating of semi-infinite solid with consecutive pulses: Influence of material properties on temperature field" Optical Laser Tech., vol. 40, pp. 472-480, 2008. (cited by 7) Abstract

 

Refereed Conference Papers:

  1. Arif, A. F. M., Al-Nassar, Y. N., Al-Qahtani, H., Khan, S. M. A., Anis, M., Eleiche, A. M., Inam, M., Al-Nasri, N. I. and Al-Muslim, H. M., "Optimization of pipe repair sleeve design", ASME PVP, Design & Analysis of Piping & Piping Components II, 2011. Abstract

  2. Khan, S. M. A., "Initial Investigation into Optimizing Design of a Pressure Vessel Saddle", ASME PVP, Design & Analysis of Pressure Vessels, Heat Exchangers and Components, 2008. Abstract

  3. Khan, S. M. A., and Levine, L. E., "Multi-scale Discrete Dislocation Plasticity Analysis: Application to Nano-indentation", NSTI-Nanotech, vol. 1, pp.649-652, 2006. Abstract

  4. Khan, S. M. A., and Khraisheh, M. K., "Predicting Mixed Mode Crack Initiation Angles in Anisotropic Materials using the Shape of the Crack Tip Core Region", ASME PVP Fatigue, Fracture, and Damage Analysis, vol. 443(2), pp.105-113, 2002. Abstract

  5. Khan, S. M. A., Zbib, H. M., and Hughes, D. A., "Stress Patterns of Deformation Induced Planar Dislocation Boundaries", Mat. Res. Soc. Symp. Proc. vol. 683E. Abstract

  6. Khan, S. M. A., and Khraisheh, M. K., "The Effect of the Crack Tip Core Region on the Crack Initiation Angles under Mixed Mode Loading", ASME PVP Fatigue, Fracture, and Damage Analysis, vol. 404, pp. 45-54, 2000.  Abstract

 

Short Papers/Communications:

  1. Khan, S. M. A., "Interaction of extrinsic dislocations with a geometrically necessary dislocation boundry ", The 17th International Symposium on Plasticity, pp. 178-180, 2011. Abstract

  2. Khraisheh, M. K., and Khan, S. M. A., "Maximum stress triaxiality ratio criterion for mixed mode crack initiation in anisotropic materials", Int. J. Fracture, vol. 104, pp. L11-L16, 2000. (cited by 1) Abstract

 

 

Image