Publications
|
J1. Z.M.
Gasem, S. S. Ali, Low-cycle fatigue behavior of powder
metallurgy 6061 aluminum alloy reinforced with
submicron-scale Al2O3 particles, Materials Science and
Engineering A 562 (2013) 109-117.
J2. A.S. Hamdy, F. Alfosail, Z.M. Gasem,
Electrochemical behavior of a discontinuously
A6092/SiC/17.5p metal matrix composite in chloride
containing solution, Electrochimica Acta 88 (2013)
129-134.
J3. Z.M. Gasem, Fatigue crack growth behavior in
powder-metallurgy 6061 aluminum alloy reinforced with
submicron Al2O3particulates, Composites: Part B
Engineering 43 (2012) 3020–3025.
J4. I.B. Obot, E.E. Ebenso, Z.M. Gasem,
Eco-friendly corrosion inhibitors: Adsorption and
inhibitive action of ethanol extracts of
chlomolaenaodorata l. For the corrosion of mild steel in
H2So4 solutions, International Journal of
Electrochemical Science Volume 7 (2012) 1997-2008
J5. Adeel Khalid, Zuhair M. Gasem, Effect of
Vanadium Contaminated Fuel on Bond Coat and Bond
Coat/Top Coat Interface of Thermal Barrier Coatings,
Applied Mechanics and Materials Vols. 110-116 (2012)
886-891.
J6. Z. M. Gasem, N. Merah, M. J. Adinoyi, and Z.
Khan, The Effects of Clay Content and Sonication Time on
Water Uptake in Epoxy-Organoclay Nanocomposites,
Advanced Materials Research Vol. 445 (2012) 509-513.
J7. M. J. Adinoyi, N. Merah, Z. Gasem, and N.
Al-Aqeeli, Effect of Sonication Time and Clay Loading on
Nanoclay Dispersion and Thermal Property of Epoxy-Clay
Nanocomposite, Key Engineering Materials Vols. 471-472
(2011) 490-495
J8. M. J. Adinoyi, N. Merah, Z. Gasem, and N.
Al-Aqeeli, Variation of Mechanical Properties of
Epoxy-Clay Nanocomposite with Sonication Time and Clay
Loading, Key Engineering Materials Vols. 471-472 (2011)
496-501.
J9. B.S. Yilbas, S.S. Akhtar, E. Bayraktar, Z.
Gasem, Laser Cutting of Thin Aluminum and Silicon alloy:
Influence of Laser Power on Kerf width, Advanced
Materials Research Vol. 445 (2012) 442-447.
J10. A.K. Sheikh, M. Younas, A.F.M. Arif, Z. Gasem,
Reliability and performance evaluation of extrusion
dies, Int. J. Reliability and Safety Vol. 5, No. 1
(2011) 21-43.
J11. B.S. Yilbas, M. Sunar, Z. Gasem, B.J. Abdul
Aleem, Laser gas assisted nitriding and tin coating of
Ti–6Al–4V alloy: Experimental and numerical
investigation of mechanical properties,journal of
materials processing technology 2 0 9 (2009) 1199–1208.
J12. I. M. Allam, Z. M. Gasem, High temperature
corrosion of alloy Haynes 556 in carburizing/oxidizing
environments, Materials ad Corrosion (Werkstoffe Und
Korrosion),vol. 58, No.4 (2007) 245-253.
J13. B.S. Yilbas, M. Sunar, Z. Gasem, B.J. Abdul
Aleem and S. Zainaulabdeen, Study into mechanical
properties of TiN coating on Ti-6Al-4V alloy through
three-point bending tests, Industrial Lubrication and
Tribology58/2 (2006) 68–71.
J14. Gasem, Z. M., Gangloff, R. P., Effect of temper
on environmental fatigue crack propagation in
7000-series aluminum alloys, Materials Science Forum
vol. 331 (2000) 331-337.
J15. Z. Gasem, Z. Khan, Fatigue life predictions for
notched Al-2.5Mg alloy in a corrosive environment,
Materials Science and Technology, Vol. 11 (1995) 159-162
J16. Z. Khan, M. Younas, Z. Gasem, A Fatigue-Life
Prediction Methodology for Notched Aluminum-Magnesium
Alloy in Gulf Seawater Environment, Journal of Materials
Engineering and Performance, Vol. 4 (1995) 617-623
C1.
Z.M. Gasem and B.M. Al-Jarallah Effect of Sensitization
on Corrosion Fatigue Crack Propagation of Type 304 Stainless
Steel in 3.5% NaCl, NACE-International Corrosion Conference
Series, Volume 6, 2012, pages 4885-4890, Corrosion 2012, 13-16
March 2012, Salt Lake City, Utah, USA.
C2.
Z. Gasem, A. Khalid, Hot corrosion of air-plasma sprayed
thermal barrier coatings used in land-based gas turbines, 14th
Middle East Corrosion Conference and Exhibition, February 12-15,
2012, in Manama, Kingdom of Bahrain.
C3.
Ihsan-ul-haqToor and Z. M. Gasem, “Problem of stress
corrosion cracking and its prediction based on repassivation
kinetics”, 14th Middle East Corrosion Conference, 12~15
February, 2012, Kingdom of Bahrain.
C4.
Padilla, V., Skrovan, J., Gasem, Z., Passivation rates
for small particulate aluminum in contact with oxide and nitride
powders, presented in the 219th ECS Meeting, 1-6 May, 2011, QC,
published in ECS Transactions, Volume 35, Issue 17, 2011, Pages
43-52.
C5.
K. S. Mezghani, Z.M. Gasem, and F. Mohammad, Tensile
properties of the gamma phase of isotactic polypropylene with
small particles. Annual Technical Conference - Society of
Plastics Engineers (2004), 62nd (Vol. 3), 2884-2891.
C6.
Z. Gasem, Environmental Degradation of Flexural and
Fracture Properties of Glass/Vinyl Ester Filament Wound Pipes,
presented in the 5thAsian-Australasian Conference on Composite
Materials (ACCM-5), Hong Kong, November 27-30, 2006. Proceedings
published in Key Engineering Materials Vol. 334-335
(2007)501-504.
C7.
M. Ahsan and Z. Gasem Corrosion fatigue crack growth
inhibition of duplex stainless steel, , Structures and
Materials, Volume 14, 2004, Eighth International Conference on
Computer Aided Assessment and Control in Damage and Fracture
Mechanics, C.A. Brebbia and A. Varvani-Farahani (Editors), WIT
Press DAMAGE AND FRACTURE MECHANICS VIII; Crete; 31 March 2004,
Pages 59-68.
C8.
Z.M. Gasem and A. M. Al-Qutub Corrosion Behavior of
Powder Metallurgy Aluminum Alloy 6061/Al2O3 Metal
Matrix Composites., 6th Saudi Engineering Conference,
Vol.5 paper 271, KFUPM, Dhahran, December 2002.
C9.
Gasem, Zuhair; Gangloff, Richard P. Rate-limiting
processes in environmental fatigue crack propagation in
7000-series aluminum alloys. Editor(s): Jones, Russell H.,
Chemistry and Electrochemistry of Corrosion and Stress Corrosion
Cracking: A Symposium Honoring the Contributions of R. W.
Staehle, New Orleans,
United States, Feb. 11-15, 2001
(2001), 501-521.
Publisher: Minerals, Metals & Materials Society,
Warrendale, Pa.
P2.
Performance Evaluation and Life Prediction Modeling of
Industrial Gas Turbine Blade Coatings Used in Saudi Arabia,
Co-I, Center of Excellence for Scientific Research Collaboration
with MIT, 2009-2013.
P3.
Atmospheric Corrosion of Engineering Metals in Saudi
Arabian Environment, Co-I, Center of Research Excellence in
Corrosion, CR-5-2010, 2011-2013.
P4.
Fatigue, Creep, and Corrosion Properties of New
Generation Magnesium Nanocomposites, Internal Project, Deanship
of Scientific Research, Co-I, 2010-2012.
P6.
Hydrogen Generation from Aluminum Corrosion: Acceleration
and Mechanism, SABIC/Fast Track Project, Deanship of Scientific
Research, CO-I, 2011.
P7.
Developing an improved epoxy-silicate nanocomposite for
water and crude oil piping systems, National Science and
Technology Program, 08-ADV68-04, Co-I, 2010.
P8.
Improving Tool Lives for Aluminum Extrusion Industry,
KACST Funded Project ARP-23-19, Co-I, 2005.
P9.
Study of Instability of Fuel and Cause of Oxidation, Gum,
and Contamination, CER2209, Saudi Electric Company, Co-I, 2009.
P10.
Effects of Particulate Volume Fraction on Low Cycle
Fatigue Behavior of Al2O3-6061 Aluminum Metal Matrix Composites.
SABIC funded project #2004/65, P-I, 2007.
P11.
Mechanical Properties of Gamma Phase Polypropylene. Fast
Track, KFUPM, Co-I, 2003.
P12.
Localized Corrosion in Particulate Aluminum-Al2O3
Metal Matrix Composites.
P13.
Corrosion Fatigue in a Duplex Stainless Steel.
P14.
Performance Evaluation of Inconel-625 Powder Coating
Thermally Sprayed by High Velocity Oxyfuel (HVOF).