Publications
 
 

Theses

  1. Siddiqui, M. N., “Structural Characterization of Heavy Ends Of Saudi Arabian Petroleum Crudes”,  M.S.Thesis, Department of Chemistry, King Fahd University of Petroleum & Minerals, Dhahran, Saudi Arabia, May 1985. [Abstract]
  2. Siddiqui, M. N., “Studies  On  Structure  And  Chemical Composition  Of  Arabian  Asphalt”,  Ph.D.Thesis, Department of Chemistry, Heriot-Watt University, Edinburgh, UK, October 1997. [Abstract]

Patents

  1. Siddiqui, M. N.; Redhwi, H. H.; Dimitris, A. S. and Gkinis, K., “Polymer-Clay Nanocomposite Material”, Patent Application No. 13/712,800, Filed and Pending with USPTO, December 22, 2012.
  2. Siddiqui, M. N.; Alhooshani, K.R.; Gondal, M.A. and Ranu, B.C., “Ionic Liquid for Desulfurization of Light Fuels”, Patent Application No.13/860,451, Filed & Pending with USPTO, April 10, 2013.
  3. Siddiqui, M. N.; Redhwi, H. H. and Dimitris, A. S. “Polymer-Clay Nanocomposite Material”, Patent Application No. 13/953,706 Filed and Pending with USPTO, July 29, 2013.
  4. Siddiqui, M. N. “Arabian Asphaltene Reinforced Polystyrene Composites” was filed with the U.S. Patent Application No. 14/023,445 Filed and Pending with USPTO, September 10, 2013.

  5. Siddiqui, M. N. "Redhwi, H. H. and Husain, S.: “Smectite clay low-density polyethylene nanocomposite”, U.S. Patent No. 9,260,586B2, Granted, February 16, 2016.

  6. Alhooshani, K. R.; Al-Swat, A. A.; Saleh, T. A. and Siddiqui, M. N.: “New Methods For Preparing Composite of Activated Carbon/Zinc Oxide and Activated Carbon/Zinc Oxide/Nickel Oxide For Desulfurization of Fuels”, U.S. Patent No. 9,352,297B2, Granted, May 31, 2016.

  7. Alhooshani, K. R.; Al-Swat, A. A.; Saleh, T. A.; Siddiqui, M. N. and Gondal, M. A.: “A Novel Method for Preparing Alumina-Zinc Oxide-Nickel Oxide Composite for Desulfurization”, U.S. Patent No. 9,421,516, Granted, August 23, 2016.

  8. Alhooshani, K. R.; Al-Swat, A. A.; Saleh, T. A.; Siddiqui, M. N. and Gondal, M. A.: “Method Using Alumina-Zinc Oxide-Nickel Oxide Composite for Desulfurization of Hydrocarbons”, U.S. Patent No. 9,663,724, Granted, May 30, 2017.

  9. Siddiqui, M. N.: “Polypropylene-Asphaltene Composite and Methods Thereof”, U.S. Patent No. 9,803,075, Granted, October 31, 2017.

     

Books

Abdurrahman A. Al-Arfaj and Mohammad Nahid Siddiqui, “Problem Solving for Freshman Chemistry I”, Deanship of Scientific Research, King Fahd University of Petroleum & Minerals, Dhahran, Saudi Arabia, April 2013.

Book Chapters

M. F. Ali and M. N. Siddiqui, “The Conversion of Waste Plastics/Petroleum Resid Mixtures to Transportation Fuels”, Chapter 14, p. 363-380, in "Feedstock Recycling and Pyrolysis of Waste Plastics: Converting Waste Plastics into Diesel and Other Fuels", edited by J. Scheirs and W. Kaminsky,  John Wiley & Sons, Ltd: UK, March 2006.

[Book Introduction]  [Chapter Introduction] 

Publications in International Journals

  1. Hasan, M.; Siddiqui, M. N. and Arab, M.: “NMR Used For Saudi Crude Asphaltene”, Oil and Gas Journal, 1988, February 8, 38-40. [Abstract]
  2. Hasan, M.; Siddiqui, M. N. and Arab, M.: “Separation and Characterization of Asphaltenes From Saudi Arabian Crudes”, Fuel, August 1988, Volume 67, No. 8, 1131-1134. [Abstract]
  3. Hasan, M.; Siddiqui, M. N. and Arab, M.: “Chromatographic Separation and Characterization of Asphaltenes Sub-fractions from Saudi Arabian Crudes”, Fuel, September 1988, Volume 67, No. 9,  1307-1309. [Abstract]
  4. Fayad, N. M.; Siddiqui, M. N. and Iqbal, S.: “Effects of Solvent and Humic Materials in Fluorimeteric Determination of Oil Hydrocarbons in Marine Sediments”, International Journal of Environmental Analytical Chemists,   April 1988, Volume 33, No. 2, 123-129. [Abstract]
  5. Hwang, J. S.; Siddiqui, M. N. and Bukhari, A. M.: “Thermolysis of 7-Isopropylidene-2,3-Diazabicyclo (2.2.1) Hept-2-ene in the Presence of Spin Trap”,  Tetrahedron Letters,  July 1991, Volume 32, No. 30,  3711-3714. [Abstract]
  6. Ali, S. A.; Hashmi, S. A.;  Siddiqui, M. N. and Wazeer, M. I. M.: “Regiochemistry of Mercury (II) Oxide Oxidation of Unsymmetrical N,N-Disubstituted Hydroxylamines”,  Tetrahedron,   1996,Volume 52, 14917-14928. [Abstract]
  7. Shirokoff, J. W.; Siddiqui, M. N. and Ali, M. F.: “Characterization of the Structure of Saudi Crude Asphaltenes by X-ray Diffraction, Energy & Fuels , 1997, Volume 11, 561-565. [Abstract]
  8. Siddiqui, M. N. and Ali, M. F.: “Studies on the Aging Behavior of Arabian Asphalts”, Fuel, July 1999, Volume 78, No. 9, 1005-1015. [Abstract]
  9. Siddiqui, M. N. and Ali, M. F.:  “Investigation of Chemical Transformations by NMR and GPC During the Laboratory Aging of Arabian asphalts”, Fuel, September 1999, Volume 78, No. 12,  1407-1416. [Abstract]
  10. Hassan, A.; Wazeer, M. I. M; Saeed, M. T.; Siddiqui, M. N. and Ali, S. A.: “Regiochemistry and Mechanism of Oxidation of N-Benzyl-N-alkylhydroxylamines to Nitrones”,  J. Phys. Org. Chem.,2000, Volume 13, 443-451. [Abstract]
  11. Ali, M. F. and Siddiqui, M. N.: “Changes in Asphalt Chemistry and Durability During Oxidation and Polymer Modification, “Petroleum Science & Technology”, 2001, Volume 19, No. 9 & 10,  1229-1249 [Abstract]
  12. Siddiqui, M. N.; Ali, M. F. and Shirokoff, J. W.:  “Use of X-Ray Technique in Assessing the Aging Pattern of Asphalt Fractions”, Fuel, January 2002, Volume 81, No. 1, 51-58. [Abstract]
  13. Siddiqui, M. N.: “Alkylation and Oxidation Reactions of Arabian Asphaltenes”, Fuel, 2003, Volume 82, Issue No. 11, 1323-1329. [Abstract]
  14. Siddiqui, M. N.: “Infrared Study of Hydrogen Bond Types in Asphaltenes, “Petroleum Science & Technology”, 2003, Volume 21, No. 9 & 10, 1601-1615. [Abstract]
  15. Ali, M. F.; Siddiqui, M. N. and Redhwi, H. H.: “Study on the Conversion of Waste Plastics/Petroleum Resid Mixtures to Transportation Fuels”, Journal of Material Cycles and Waste Management,2004, Vol. 6, 27-34. [Abstract] [Fulltext Online]
  16. Ali, M. F.; Siddiqui, M. N. and Al-Hajji A. A.: “Structural Studies on Residual Fuel Oil Asphaltenes by RICO Method”, Petroleum Science & Technology, 2004, Vol 22, No. 5 & 6, 631-645.[Abstract]
  17. Ali, M. F. and Siddiqui, M. N.: “Thermal and Catalytic Decomposition Behavior of PVC Mixed Plastic Waste with Petroleum Residue, “Journal of Analytical and Applied Pyrolysis”, 2005, Vol. 74 (1-2), 282-289. [Abstract] [Cited by]
  18. Ali, M. F.; Al-Malki, A.; El-Ali, B.; Martinie, G. and Siddiqui, M. N.: “Deep Desulphurization of Gasoline and Diesel Fuels Using Non-Hydrogen Consuming Techniques”, Fuel, 2006, Volume 85, Issue No. 10-11, 1354-1363. [Abstract]
  19. Rahman Faizur, Siddiqui, M. N.; Redhwi, H. H. and Ali, M. F.: “Catalytic Processing of Waste Plastics With/Without Petroleum Resid – An Economic Evaluation”, Energy Sources A, 2006, Vol. 28(15), 1353-1363.  [Abstract] [Cited by]
  20. Gondal, M. A. and Siddiqui, M. N.: “Identification of Different Kinds of Plastics Using Laser Induced Breakdown Spectroscopy for Waste Management”, Journal of Environmental Science and Health Part A, 2007, Vol. 42, No. 13, 1989-1997. [Abstract] [Cited by]
  21. Siddiqui, M. N.: Gondal, M. A. and Redhwi, H.H.: “Identification of Different Type of Polymers in Plastic Wastes” Journal of Environmental Science and Health Part A, 2008, Vol. 43, No.11, September 1303-1310. [Abstract]
  22. Siddiqui, M. N.: “Estimating Methy/Methylene Groups in Asphaltenes and Other Fractions of Asphalt”, Petroleum Science & Technology, Vol. 26, No. 17, December 2008, p. 2048-2057. [Abstract]
  23. Siddiqui, M. N.: M. G. Baig and Ali, M. F.:  “Effect of Chemical Additives on the Binding Strength of Arabian Asphalts” Petroleum Science & Technology, Volume 27, Issue 6, April 2009, pages 575 – 587. [Abstract]
  24. Siddiqui, M. N. and Redhwi, H. H.: “Pyrolysis of Mixed Plastics For The Recovery of Useful Products”, Fuel Processing Technology, Vol.90, No. 4, April 2009, p. 545-552. [Abstract]
  25. Siddiqui, M. N.: "Effect of Oxidation on the Chemistry of Asphalt and its Fractions", Journal of King Saud University, Science, Vol. 21, 2009, p. 25-31. [Abstract]
  26. Siddiqui, M. N.: "Conversion of Hazardous Plastic Wastes into Useful Chemical Products", Journal of Hazardous Materials, Vol.167, No. 1-3, July 2009, p. 728-735. [Abstract]
  27. Siddiqui, M. N., Gondal, M. A. and Nasr, M. M.: “Determination of Trace Metals Using Laser Induced Breakdown Spectroscopy in Insoluble Organic Materials Obtained from Pyrolysis of Plastics Waste”, Bulletin of Environmental Contamination and Toxicology, Vol. 83, No. 1, July 2009, p. 141-145. [Abstract]
  28. Siddiqui, M. N. and Redhwi, H. H.: “Catalytic Coprocessing of Waste Plastics and Petroleum Residue into Liquid Fuel Oils”, Journal of Analytical and Applied Pyrolysis, Vol. 86, No. 1, September2009, pp. 141-147. [Abstract]
  29. Siddiqui, M. N.:  “NMR Finger Printing of Chemical Changes in Asphalt Fractions on Oxidation” Petroleum Science & Technology, Vol. 27, Issue 17, January 2010, pp 2032-2044. [Abstract]
  30. Gondal, M. A.; Siddiqui, M. N. and Nasr, M. M.: “Detection of Trace Metals in Asphaltenes Using Advanced LIBS Technique”, Energy & Fuels, Volume 24, Issue 1, February 2010, pp. 1099-1105.[Abstract]
  31. Mekki, A.; Khattak, G. D. and Siddiqui, M. N.: “Structure and Electrical Properties of SrO-borovanadate (V2O5)z(SrO)0.2(B2O3)0.8-z Glasses”, International Journal of Modern Physics B, Volume: 24, Issue: 11, April 2010, pp. 1471-1488. [Abstract]
  32. Siddiqui, M. N.; Achilias, D. S.; Redhwi, H. H.; Bikiaris, D.  N.; Katsogiannis, K. A. G. and Karayannidis, G. P.: “Hydrolytic Depolymerization of PET in a Microwave Reactor”, Macromolecular Materials and Engineering, Volume 295, Issue No. 6, June 2010, pp. 575-584. [Abstract]
  33. Gupta, V.K.; Jain, R.; Siddiqui, M. N.; Malathi, S. and Pathak, D.: "Equilibrium and Thermodynamic studies on the Adsorption of the dye Rhodamine-B onto Mustard cake and Activated Carbon",Journal of Chemical Engineering Data, November 2010, Vol. 55, pp. 5225-5229. [Abstract].
  34. Siddiqui, M. N.: “Catalytic Pyrolysis of Arab Heavy Residue and Effects on the Chemistry of Asphaltene”, Journal of Analytical and Applied Pyrolysis, November 2010, Vol. 89, Issue No. 2, pp. 278-285. [Abstract]
  35. Achilias, D. S., Redhwi, H. H., Siddiqui, M. N., Nikolaidis, A. K., Bikiaris, D. N. and Karayannidis, G. P.: “Glycolytic Depolymerization of PET Waste in a Microwave Reactor”, Journal of Applied Polymer Science, Volume 118, Issue No. 5, December 2010, pp. 3066-3073 [Abstract].
  36. Gupta, V.K.; Jain, R.; Antonijevic, M. M.; Siddiqui, M. N.; Dwivedi, A. and Mishra, R.: Assay of Nimodipine- an Anti Hypertensive drug in Pharmaceutical Formulations by Cathodic Adsorptive Stripping Voltammetry, Int. J. Electrochem. Sci., January 2011, Vol. 6, pp. 37-51 [Abstract].
  37. Siddiqui, M. N. and Gondal, M. A.: “Laser based photo-oxidative degradation of methyl tertiary-butyl ether (MTBE) using zinc oxide (ZnO) catalyst”, Journal of Environmental Science and Health Part A, August 2011, Vol. 46(10), 1154-1159. [Abstract]
  38. Parveen, M.; Mehdi, S. H.; Siddiqui, M. N. and Fettouhi, M. B.: “Synthesis and Crystal Structure of (Z)-Ethyl 5-(phenylamino)-3-(phenylimino)-3H-1, 2-dithiole-4-carboxylate”, Synthetic Communications, August 2011, Vol. 41(23), pp. 3469-3476. [Abstract]
  39. Khattak, G. D.; Mekki, A. and Siddiqui, M. N.: “Compositional Dependence of DC Electrical Conductivity of SrO-Vanadate Glasses”, Solid State Ionics, March 2012, Vol. 211, pp. 5-11. [Abstract]
  40. Gondal, M. A.; Alzahrani, A. J.; Randhawa, M. A. and Siddiqui, M. N.:  “Morphology and antifungal effect of nano ZnO and nano Pd doped nano ZnO against Aspergillus and Candida”, Journal of Environmental Science and Health Part A, May 2012, Vol. 47(10), 1413-1418. [Abstract]
  41. Josef Pola, Mohammed A. Gondal, Markéta Urbanová, Dana Pokorná, Husain M. Masoudi, Snejana Bakardjieva, Zdeněk Bastl, Jan Šubrt and Mohammad N. Siddiqui: “Laser photodeposition of ambient and high-pressure magnetite nanograins in a-Fe/C/O composite: the high-pressure metal oxide polymorph surviving ambient conditions”, Journal of Photochemistry and Photobiology A: Chemistry, September 2012, Vol. 243, 33-40. [Abstract]
  42. Siddiqui, M. N.; Redhwi, H. H.; Achilias, D. S.: “Recycling of poly(ethylene terephthalate) waste through methanolic pyrolysis in a microwave reactor”, Journal of Analytical and Applied Pyrolysis,November 2012, Vol. 98, 214–220. [Abstract]
  43. Siddiqui, M. N.; Redhwi, H. H.; Gkinis, K. and Achilias, D. S.: “Synthesis and characterization of novel nanocomposite materials based on poly(styrene-cobutyl methacrylate) copolymers and organomodified clay”, European Polymer Journal, February 2013, 49(2), 353-365. [Abstract]
  44. Gupta, V.K.; Ali, I.; Saleh, T.A.; Siddiqui, M. N. and Agarwal, S. “Chromium Removal from Water by Activated Carbon Developed from Waste Rubber Tires”, Environmental Science and Pollution Research, March 2013, 20(3), 1261-1268. [Abstract]
  45. Redhwi, H. H; Siddiqui, M. N.; Andrady, A. L. and Hussain, S. "Durability of LDPE Nanocomposites with Clay, Silica, and Zinc Oxide - Part I: Mechanical Properties of the Nanocomposite Materials,"Journal of Nanomaterials, March 2013, Vol. 2013, Article ID 654716, 6 pages. [Abstract]
  46. Gondal, M. A.; Siddiqui, M. N. and Alhooshani, K. R., “Removal of sulfur compounds from diesel using ArF laser and oxygen”, Journal of Environmental Science and Health Part A, August, 2013,Vol. 49(13), 1663-1669.
  47. Redhwi, H. H; Siddiqui, M. N.; Andrady, A. L. and Hussain, S. "Durability of LDPE Nanocomposites with Clay, Silica, and Zinc Oxide - Part II: Weatherability of the Nanocomposites, “Polymer Composites, November 2013, Vol 34(11), 1878-1883.
  48. Siddiqui, M. N. and Gondal, M. A., “Nano-catalysts supported laser-induced photocatalytic degradation of MTBE”, Journal of Environmental Science and Health Part A, January 2014, Vol 49(1-2), 52-58.
  49. Siddiqui, M. N.; Redhwi, H. H.; Charitopoulou, D. and Achilias, D. S.: “Effect of organomodified clay on the reaction kinetics, properties and thermal degradation of nanocomposites based on poly(styrene-co-ethyl methacrylate)”, Polymer International, Accepted manuscript Online: July 23, 2013. DOI: 10.1002/pi.4590

Conferences

  1. Fayad, N. M.; Iqbal, S.; and Siddiqui, M. N.: “Determination of Polycyclic Aromatic Hydrocarbons in Drinking Water”, Third National Meeting of Chemists, KFUPM, Dhahran, Saudi Arabia, March 12-14, 1989, p. 27. [Abstract]
  2. Siddiqui, M. N. and Hasan, M.: “Qualitative Assessment of Acid/Base Ratios of Arab Heavy and Arab Berri Asphaltenes”, Third National Meeting of Chemists, KFUPM Dhahran, Saudi Arabia,March 12-14, 1989. [Abstract]
  3. Fayad, N. M.; Siddiqui, M. N. and Iqbal, S.: “Development of a Method For the Determination of Oil Hydrocarbons in Fish”, Third National Meeting of Chemists, KFUPM, Dhahran, Saudi Arabia, March 12-14, 1989. [Abstract]
  4. Ali, M. F. and Siddiqui, M. N.: “Arabian Asphalts – Chemistry and Rheology”,  Preprints, American Chemical Society, Division of Fuel Chemistry,  Volume 43, No. 4, August 1998, p. 1063.
  5. Ali, M. F. and Siddiqui, M. N.: “The Role of Asphaltenes in Resid Upgrading”, Proceedings, Middle East PETROTECH 98, Bahrain, Vol. 1, September 1998, p. 365. [Abstract]
  6. M. F. Ali and Siddiqui, M. N.: “Chemical Composition and Performance Related Properties of Polymer Modified Arab Asphalts”,  Preprints, American Chemical Society, Division of Petroleum Chemistry,  Volume 44, No. 3, August 1999, p. 358. [Abstract]
  7. Ali, M. F. and Siddiqui, M. N.: “Relationships Between Asphalt Chemical Composition and Performance-Related Properties”, 18th Research and Development Center Technical Exchange Meeting, Saudi Aramco, Dhahran, Saudi Arabia, May 1-2, 2000. [Abstract]
  8. Siddiqui, M. N. and Ali, M. F.: “NMR and IR Studies of Chemical Composition of Asphalt During the Aging”, Proceedings, Chemistry in Industry, Bahrain, October 30-November 1, 2000.[Abstract]
  9. Ali, M. F. and Siddiqui, M. N.: “Polymer Modified Asphalts for Paving Applications”, Proceedings, Chemistry in Industry, Bahrain, October 30-November 1, 2000. [Abstract]
  10. Siddiqui, M. N. and Ali, M. F.: “Evaluation of Chemical Changes in the Structure of Asphaltenes”, Proceedings, First Saudi Science Conference, KFUPM, Dhahran, Saudi Arabia, April 9-11, 2001. [Abstract]
  11. Ali, M. F. and Siddiqui, M. N.: “Chemical Aspects of Incompatibility in Crude Oil Refining-Structural Studies on Resids”, Proceedings, First Saudi Science Conference, KFUPM, Dhahran, Saudi Arabia, April 9-11, 2001. [Abstract]
  12. Ali, M. F.; Siddiqui, M. N. and Redhwi, H. H.: “Coprocessing of Model and Waste Plastics with Petroleum Residues”, Proceedings, Petrotech 2001, Bahrain, October 29-31, 2001. [Abstract]
  13. M. F. Ali and Siddiqui, M. N.: “The Effect of Age Hardening on the Structure of Asphaltenes Derived from Arabian Asphalts”,  Proceedings, American Institute of Chemical Engineers (AICHE), Spring National Meeting, March 10-14, 2002, New Orleans, LA. [Abstract]
  14. Siddiqui, M. N.; M. F. Ali and Redhwi, H. H.: “Catalytic Conversion of Waste Plastics/Petroleum Resid Mixtures into Transportation Fuels”, Preprints, American Chemical Society, Division of Petroleum Chemistry, Boston, MA, Volume 47, No. 4, August 2002, p. 374.
  15. Ali, M. F.; Siddiqui, M. N. and Redhwi, H. H.: “Study on the Conversion of Waste Plastics/Petroleum Resid Mixtures to Transportation Fuels”, The 2nd International Symposium on Feedstock Recycling of Plastics (ISFR’02), Ostend, Belgium September 8-12, 2002. [Abstract]
  16. Ali, M. F.; Siddiqui, M. N. and Redhwi, H. H.: “Recycling And Disposal Of Waste Plastics Via Catalytic Thermal Cracking With Petroleum Residues”, Sixth Saudi Engineering Conference, KFUPM,Dhahran, Saudi Arabia, December 14-16, 2002. [Abstract]
  17. Siddiqui, M. N.: “Hydrogen Bonding Distribution Studies of Asphaltenes”, Proceedings, Chemistry in Industry, Bahrain, October 14-16, 2002. [Abstract]
  18. Ali, M. F.; Siddiqui, M. N.; Redhwi, H. H. and Faizur Rahman: “Transportation Fuels from the Catalytic Coprocessing of Waste Plastics with Petroleum Resid”, Proceedings, Petrotech 2003,Bahrain, September 29-October 1, 2003. [Abstract]
  19. Ali, M. F. and Siddiqui, M. N.: “Ruthenium Ion Catalyzed Oxidation of Arabian Asphaltenes”, The Second Saudi Science Conference", KAAU, Jeddah, Saudi Arabia, March 15-17, 2004. [Abstract]
  20. Ali, M. F. and Siddiqui, M. N.: “Thermal and Catalytic Decomposition Behavior of PVC Mixed Plastic Waste with Petroleum Resid”, 16th International Symposium on Analytical & Applied Pyrolysis "Pyrolysis 2004", Alicante, Spain, May 23 –27, 2004. [Abstract]
  21. Siddiqui, M. N.; Ali, M. F. and M. G. Baig: “Chemistry of Bonding between Asphalt and Aggregates”, 6th International Conference and Exhibition, on "Chemistry in Industry (CHEMINDIX 2004)",Bahrain, September 27-29, 2004. [Abstract]
  22. Siddiqui, M. N.: “Effect of Asphalt Oxidation on the Structure of Asphaltenes”, "International Conference on Chemistry and Industry, Riyadh, Saudi Arabia, December 11-15, 2004. [Abstract]
  23. Ali, M. F. and Siddiqui, M. N.: “The Conversion of Waste Plastics/Petroleum Residue Mixtures to Transportation Fuels", "First International Conference - Environmentally Sustainable Development, ESDev-2005", Abbottabad, Pakistan, June 26-28, 2005. [Abstract]
  24. M. N. Siddiqui; M. F. Ali and M. G. Baig “Effect of Anti-Stripping Agents on Asphalt-Aggregates Interactions", 40th  IUPAC Congress,“Innovation in Chemistry”,  Beijing, China, August 14-19,2005. [Abstract]
  25. Siddiqui, M. N.; Ali, M. F. and Redhwi, H. H.: “Identification of Polymer Types in Saudi Arabian Waste Plastics”, The 3rd International Symposium on Feedstock Recycling of Plastics (ISFR’05),Karlsruhe, Germany, September 25-29, 2005. [Abstract]
  26. Siddiqui, M. N. and Ali, M. F.: “Catalytic Co-Liquefaction of Model and Waste Plastics”, 15th Annual Saudi-Japanese Symposium on Catalysts in Petroleum Refining & Petrochemicals, KFUPM, The Research Institute, Dhahran, Saudi Arabia, November 27-28, 2005. [Abstract]
  27. Siddiqui, M. N.: “Effect of Oxidation on the Chemistry of Asphalt and Its Fractions”, Third Saudi Science Conference, KSU, Riyadh, Saudi Arabia, March 10-13, 2007. [Abstract]
  28. Siddiqui, M. N.: “Monitoring the reactivity of carbonyl functional groups of asphaltenes using infrared (IR) spectroscopy”, 7th International Conference and Exhibition, on "Chemistry in Industry(CHEMINDIX 2007)", Bahrain, March 26-28, 2007. [Abstract]
  29. Siddiqui, M. N.: “Infrared Quantitative Measurements of Some Alkyl Groups in the Generic Fractions of Asphalt”, The 41st IUPAC World Chemistry Congress, Chemistry Protecting Health, Natural Environment, and Cultural Heritage, Torino, Italy, August 6-11, 2007. [Abstract]
  30. Siddiqui, M. N. and Redhwi, H. H.: “Useful Liquid Products from the Pyrolysis of Mixed Plastics”, 234th ACS National Meeting & Exposition", Preprints, Div. Fuel Chemistry, 52(2), 761-762, Boston, USA, August 19-23, 2007.
  31. Siddiqui, M. N. and Redhwi, H. H.: “Pyrolysis Of Waste Plastics Into Environmental And Industrially Useful Products”, Pure and Applied Chemistry International Conference (PACCON 2008),Bangkok, Thailand, January 30-February 1, 2008. [Abstract]
  32. Siddiqui, M. N., “Pyrolysis of Mixed Waste Plastics Using Azoisobutylnitrile (AIBN) - An Initiator”, 18th International Symposium on Analytical & Applied Pyrolysis "Pyrolysis 2008", Lanzarote, Spain, May 18–23, 2008. [Abstract]
  33. Siddiqui, M. N. and Ali, M. F: “Desulphurization of Model Gasoline by Extractive Oxidation Method”, 6th Middle East Refining and Petrochemical Conference and Exhibitions (Petrotech 2008),Bahrain, May 26-28, 2008.  [Abstract]
  34. Siddiqui, M. N.: “Effect of Resid Cracking on the Chemistry of Asphaltene”, 236th ACS National Meeting & Exposition", Preprints, Div. Fuel Chemistry; Philadelphia, USA, 53(2), 565-566,Philadelphia, USA, August 17–21, 2008.
  35. Siddiqui, M. N.: “Characterization of Important Petroleum Fraction Using Advanced Analytical Techniques”, 1st International Conference and Exhibition, on "Laboratory Technology(LABTECH2008)", Bahrain, October 20-22, 2008. [Abstract]
  36. Gondal, M. A.; Siddiqui, M. N. and Nasr, M. M.: “Fingerprinting of Different Types of Plastics Using a Laser Sensor”, 1st International Conference and Exhibition, on "Laboratory Technology(LABTECH2008)", Bahrain, October 20-22, 2008. [Abstract]
  37. Siddiqui, M. N. and Gondal, M. A.: “Rapid and Accurate Characterization of Plastic Waste Using Laser Based Spectral Analysis”, 61st Annual Session of Indian Institute of Chemical Engineers(CHEMCON-2008)", Chandigarh, India, December 27-30, 2008. [Abstract]
  38. Siddiqui, M. N.: “Exploring The Chemical Reactivity Of Asphaltenes”, “237th ACS National Meeting & Exposition” Salt Lake City, USA, Preprints, Division of Fuel Chemistry,  54(1), 14-15, March 22-26, 2009.
  39. Siddiqui, M. N.: “Managing Health and Environment Hazard of Waste Plastics”, Taibah International Chemistry Conference-2009, Al-Madinah Al-Munawarah, Saudi Arabia, March 23-25, 2009. [Abstract]
  40. Siddiqui, M. N. and Redhwi, H. H.: “Chemical Degradation of Polyethylene Terephthalate (PET)”, 13th International IUPAC Conference on Polymers and Organic Chemistry (POC-09), Montreal, Canada, July 5-8, 2009. [Abstract]
  41. Siddiqui, M. N. and Redhwi, H. H.: “FT-IR Characterization of Products Obtained By the Chemical Recycling of Polyethylene Terephthalate (PET)”, 5th International Conference on Advanced Vibrational Spectroscopy (ICAVS-5), Melbourne, Australia, July 12-17, 2009. [Abstract]
  42. Siddiqui, M. N.: “Use of FT-IR in Monitoring the Chemical Reactivity of Asphaltenes”, 5th International Conference on Advanced Vibrational Spectroscopy (ICAVS-5),         Melbourne, Australia, July 12-17, 2009. [Abstract]
  43. Siddiqui, M. N.: “Chemical Methods of Removing Metals From Heavy Residues”, 4th Saudi Science Conference, Al-Madinah Al-Munawarah, Saudi Arabia, March 21-24, 2010. [Abstract]
  44. Siddiqui, M. N. and Gondal, M. A.: “Managing Waste Plastics by Tertiary Recycling Process”, EnviroArabia2010", Bahrain, April 18-21, 2010. [Abstract]
  45. Siddiqui, M. N.: “Recycling of Waste Plastics into Important Chemicals Species", 5th Annual International Symposium on Environment,  Athens, Greece, May 20-23, 2010. [Abstract]
  46. Siddiqui, M. N.; Gondal, M. A. and Nasr, M. M.: “Determination of Hazardous Trace Metals in Mixed Plastics Waste”, 3rd International Conference For Young Chemists 2010 (ICYC2010), Penang,Malaysia, June 23-25, 2010. [Abstract]
  47. Siddiqui, M. N. and Gondal, M. A.: “Photocatalytic Degradation of Health Hazardous MTBE in Water”, SEGH 2010 International Conference and Workshops, Galway, Ireland, June 27-July 2, 2010.[Abstract]
  48. Siddiqui, M. N.: “Catalytic Cracking of Heavy Residue Under Different Reaction Conditions”, “241st  ACS National Meeting & Exposition” Anaheim, CA, USA, Preprints, Division of Fuel Chemistry,  56 (1), 460-461, March 27-31, 2011.
  49. Siddiqui, M. N. and Gondal, M. A.: “Determination of Hazardous Trace Metals in Mixed Plastics Waste”, Faraday discussion 150: Frontiers in Spectroscopy, Basel, Switzerland, April 6-8, 2011.[Abstract]
  50. Siddiqui, M. N.: “Recycling of Waste Plastic into Useful Products”, Jubail International Environment Conference and Exhibition, Jubail, Saudi Arabia, June 5-6, 2011. [Abstract]
  51. Siddiqui, M. N. and Redhwi, H. H: “Recycling of Waste Polyethylene Terephthalate (PET) into Feedstock Monomers”, TechConnect World 2011 Conference and Trade Show, Boston, Massachusetts,USA, June 13-16, 2011. [Abstract]
  52. Siddiqui, M. N.: “Effect of Catalytic Cracking on the Chemistry of Different Fractions of Heavy Residue”, 2nd International Laboratory Technology Conference and Exhibition, Doha, Qatar, October 10-12, 2011. [Abstract].
  53. Siddiqui, M. N.; Alhooshani, K. R. and M. A. Gondal: “Non-catalytic Deep Desulfurization of Model Fuel Oil”, “243rd  ACS National Meeting & Exposition” San Diego, CA, USA, Preprints, Division of Fuel Chemistry,  57(1), 764-765, March 25-29, 2012.
  54. Siddiqui, M. N. and Redhwi, H. H.: “Effect of different nanomaterials on the durability and mechanical properties of LDPE nanocomposite”, Austrian-Slovenian Polymer Meeting (ASPM), Bled, Slovenia, pp. 84-85, April 3-5, 2013. [Abstract]
  55. Siddiqui, M. N.; Alhooshani, K. R.; M. A. Gondal and Ranu, B. C.: “Desulfurization of Model Fuel Oil Using Novel Ionic Liquids”, “245th ACS National Meeting & Exposition” New Orleans, LA, USA, Preprints, Division of Energy and Fuels,  58(1), 1022-1023, April 7-11, 2013.
  56. Alhooshani, K. R.; Siddiqui, M. N.; Tawfik A. Saleh and M. A. Gondal: “ Adsorptive Desulfurization of Model Fuel Oil Using Novel Metal Oxides”, “245th ACS National Meeting & Exposition” New Orleans, LA, USA, Preprints, Division of Energy and Fuels,  58(1), 1024-1025, April 7-11, 2013.
  57. Siddiqui, M. N.; Alhooshani, K. R. and M. A. Gondal: “Use of Chemical Methods For The Desulfurization of Model Fuels”, “IUPAC 44th World Chemistry Congress” Istanbul, Turkey, page 389, July 11-16, 2013.
  58. Alhooshani, K. R.; Al-Swat, A.; Saleh, T. A. and Siddiqui, M. N. “Kinetic studies and evaluation of nanoporous carbon for desulfurization of fuels coupled with GC- SCD detection method”,, “246th ACS National Meeting & Exposition” Indianapolis, IN, USA, Preprints, Division of Energy and Fuels, September 8-12, 2013.
  59. Siddiqui, M. N. and Redhwi, H. H: “Conversion of Waste PET into Important Chemicals Using Amines”, 7th International Symposium on Feedstock Recycling of Polymeric Materials (ISFR2013), New Delhi, India, October 23-26, 2013.

 
All rights are reserved. KFUPM/Chemistry Department