Importing a Library into a New Project

In the
project manager, press CTRL+L. The following dialog box appears

Click
on the “Lib Manager” button. The following window appears

There are two tabs in the
library manager window: Libraries and Objects,
Make sure that libraries tab is selected.

Right click on the library
you want to copy. Choose “Copy” from the menu.

Choose A:\ drive as the
destination directory. Before clicking OK, make sure you insert an empty
floppy disk into drive A:\. After clicking OK, the copying process begins.

Go to the destination
machine. Create a new project. Insert the floppy into the A:\ drive. Start
the lib manager. From main menu, select Library à
Attach. Choose A: drive, the copied library should appear. Click on it and
click OK. Close the library manager.

If the project
library dialog box is not appearing in the project manager window,
click CTRL+L to show it.

Choose the library you have
just attached in step 6 then click “Add >>”. The library
now is added to the new project.

This procedure can be repeated to import more than one library.

Important
note:

For
a project to be simulated and implemented properly, the project must contain
one and only one schematic sheet. If the project has more than one schematic
sheet, remove irrelevant ones by right-clicking on
them in the project manager and choose “Remove”.