Abdelouahed
Tounsi
KFUPM
Chair Professor - Civil and Environmental Engineering Department
King
Fahd University of Petroleum & Minerals
E-mail:
abdelouahed.tounsi@kfupm.edu.sa
Tel:
+966-13-860-3227, Fax: +966-13-860-2215
EXPERTISE
& RESEARCH INTERESTS
Plate/Beam
theories, Composite Structures, Functionally graded Structures, Nanoncomposite
structures, Nanoplates, Nanobeams, Non-local Elasticity.
EDUCATION
· Ph.D., U.D.L (SBA), 2002
· M.Sc., U.D.L (SBA), 1997
· B.Sc., EL NAJAH (SIDI BEL
ABBES), 1989
ACADEMIC
POSITIONS
· King Fahd University of Petroleum & Minerals
Chair Professor, Oct 2017 - Present
Center for Communications and IT Research
· University of Sidi-Bel-Abbes,
Algeria
Professor at Civil Engineering Department
PROFESSIONAL
SERVICES
EDITORIAL BOARD MEMBER OF
REVIEWER
PHYSICA E: Low-Dimensional Systems and Nanostructures |
Micro & Nano Letters |
Journal of Applied Physics |
Current Applied Physics |
Journal of Biomechanics |
Journal of Composite Materials |
Composite Structures |
Computational Materials Science |
International Journal of Solids and Structures |
International Journal of Mechanical Sciences |
Applied Mathematical Modeling |
Proceedings of The Royal Society A, Mathematical, Physical and
Engineering Science |
Structural Engineering and Mechanics, an International Journal |
Mechanics of Materials Nano |
RESEARCH
1. Meksi, R, Benyoucef, S., Mahmoudi,
A., Tounsi, A., Adda Bedia, E.A., Mahmoud, SR. (2017), "An
analytical solution for bending, buckling and vibration responses of FGM
sandwich plates", Journal of Sandwich Structures & Materials,
(In press).
2. Bellifa, H., Benrahou,
K.H., Bousahla, A.A., Tounsi, A., Mahmoud, S.R. (2017), “A nonlocal
zeroth-order shear deformation theory for nonlinear postbuckling of nanobeams”,
Structural Engineering and
Mechanics, 62(6),
695 - 702.
3. Besseghier, A., Houari, M.S.A., Tounsi,
A., Mahmoud, S.R. (2017), “Free vibration analysis of embedded nanosize FG
plates using a new nonlocal trigonometric shear deformation theory”, Smart
Struct. Syst., Int. J., 19(6), 601 - 614.
4. El-Haina, F., Bakora, A., Bousahla, A.A., Tounsi, A., Mahmoud, S.R.
(2017), “A simple
analytical approach for thermal buckling of thick functionally graded sandwich plates", Struct.
Eng. Mech., 63(5), 585-595.
5. Mouffoki, A., Adda Bedia, E.A.,
Houari, M.S.A., Tounsi, A., Mahmoud, S.R. (2017), “Vibration analysis of
nonlocal advanced nanobeams in hygro-thermal environment using a new
two-unknown trigonometric shear deformation beam theory”, Smart
Structures Systems, 20(3), 369-383.
6. Chikh, A., Tounsi, A.,
Hebali, H., Mahmoud, S.R. (2017), "Thermal buckling analysis of cross-ply
laminated plates using a simplified HSDT", Smart Structures Systems,
19(3), 289-297.
7. Menasria, A., Bouhadra, A., Tounsi,
A., Bousahla, A.A., Mahmoud, S.R. (2017), "A new and simple HSDT for
thermal stability analysis of FG
sandwich plates", Steel and Composite Structures, 25(2), 157-175.
8. Fahsi, A., Tounsi, A., Hebali, H.,Chikh, A., AddaBedia, E.A., Mahmoud, S.R.
(2017), “A four variable refined nth-order
shear deformation theory for mechanical and thermal buckling analysis of
functionally graded plates", Geomechanics and Engineering, 13(3), 385-410.
9. Klouche, F., Darcherif, L.,
Sekkal, M., Tounsi, A., Mahmoud, S.R. (2017), “An original single variable shear
deformation theory for buckling analysis of thick isotropic plates”, Struct. Eng. Mech., 63(4), 439-446.
10. Zidi, M., Houari, M.S.A., Tounsi,
A., Bessaim, A., Mahmoud,
S.R. (2017), “A
novel simple two-unknown hyperbolic shear deformation theory for functionally
graded beams”, Struct. Eng.
Mech., Int. J., (In press).
11. Merdaci, S., Tounsi, A.,
Bakora, A. (2016), “A novel four variable refined plate theory for laminated
composite plates”, Steel Compos. Struct., 22(4), 713-732.
12. Bouafia, K., Kaci, A., Houari,
M.S.A., Benzair, A., Tounsi, A. (2017), “A nonlocal
quasi-3D theory for bending and free flexural vibration behaviors of
functionally graded nanobeams”, Smart Structures and Systems, 19(2), 115-126.
13. Benahmed, A., Houari, M.S.A.,
Benyoucef, S., Belakhdar, K., Tounsi, A. (2017), "A novel quasi-3D
hyperbolic shear deformation theory for functionally graded thick rectangular
plates on elastic foundation", Geomechanics and Engineering,
12(1), 9-34.
14. Bennoun, M., Houari, M.S.A., Tounsi, A. (2016), “A novel five
variable refined plate theory for vibration analysis of functionally graded sandwich plates”, Mechanics of Advanced Materials and Structures, 23(4), 423 – 431.
15. Bousahla, A.A., Benyoucef, S., Tounsi,
A., Mahmoud, S.R. (2016), “On thermal stability of plates with functionally
graded coefficient of thermal expansion”, Structural Engineering and
Mechanics, 60(2), 313-335.
16. Ahouel, M., Houari, M.S.A., Adda
Bedia, E.A., Tounsi, A. (2016), “Size-dependent mechanical behavior of
functionally graded trigonometric shear deformable nanobeams including neutral
surface position concept”, Steel and Composite Structures, 20(5),
963 – 981.
17. Draiche, K., Tounsi, A.,
Mahmoud, S.R. (2016), “A refined theory with stretching effect for the flexure
analysis of laminated composite plates”, Geomechanics and Engineering,
11(5), 671-690.
18. Benbakhti, A., Bachir Bouiadjra,
M., Retiel, N., Tounsi, A. (2016), "A new five unknown quasi-3D type
HSDT for thermomechanical bending analysis of FGM sandwich plates", Steel
and Composite Structures, 22(5), 975 – 999.
19. Bounouara, F., Benrahou, K.H.,
Belkorissat, I., Tounsi, A. (2016), “A nonlocal zeroth-order shear
deformation theory for free vibration of functionally graded nanoscale plates
resting on elastic foundation”, Steel and Composite Structures, 20(2),
227 – 249.
20. Bellifa,
H., Benrahou, K.H., Hadji, L., Houari, M.S.A., Tounsi, A. (2016),
“Bending and free vibration analysis of functionally graded plates using a
simple shear deformation theory and the concept the neutral surface position”, J Braz. Soc. Mech. Sci. Eng., 38, 265–275.
21. Hebali, H., Bakora, A., Tounsi,
A., Kaci, A. (2016), "A novel four variable refined plate theory for
bending, buckling, and vibration of functionally graded plates", Steel
and Composite Structures, 22(3), 473-495.
22. Saidi, H., Tounsi, A.,
Bousahla, A.A. (2016), "A simple hyperbolic shear deformation theory for
vibration analysis of thick functionally graded rectangular plates resting on
elastic foundations", Geomechanics and Engineering, 11(2),
289-307.
23. Bourada,
F., Amara, K., Tounsi, A. (2016), "Buckling analysis of isotropic
and orthotropic plates using a novel four variable refined plate theory", Steel
and Composite Structures, 21(6), 1287-1306.
24. Beldjelili, Y., Tounsi,
A., & Mahmoud, S.R. (2016), “Hygro-thermo-mechanical bending of S-FGM
plates resting on variable elastic foundations using a four-variable
trigonometric plate theory”, Smart
Structures and Systems, 18(4),
755-786.
25. Houari, M.S.A., Tounsi, A.,
Bessaim, A., Mahmoud, S.R. (2016), "A new simple three-unknown sinusoidal
shear deformation theory for functionally graded plates", Steel and
Composite Structures, 22(2), 257 – 276.
26. Abdelbari, S., A., Fekrar, A.,
Heireche, H., Saidi, H., Tounsi, A., Adda Bedia, E.A. (2016), “An
efficient and simple shear deformation theory for free vibration of
functionally graded rectangular plates on Winkler–Pasternak elastic foundations”, Wind and
Structures, 22(3), 329 – 348.
27. Chikh, A., Bakora, A., Heireche,
H., Houari, M.S.A., Tounsi, A., Adda Bedia, E.A. (2016), "
Thermo-mechanical postbuckling of symmetric S-FGM plates resting on Pasternak
elastic foundations using hyperbolic shear deformation theory", Structural
Engineering and Mechanics, 57(4), 617-639.
28. Mouaici, F., Benyoucef, S., Ait
Atmane, H., Tounsi, A. (2016), “ Effect of porosity on vibrational
characteristics of non-homogeneous plates using hyperbolic shear deformation
theory”, Wind and Structures, 22(4), 429 – 454.
29. Bouderba, B., Houari, M.S.A. and Tounsi,
A., Mahmoud, S.R. (2016), "Thermal stability of functionally graded
sandwich plates using a simple shear deformation theory", Structural
Engineering and Mechanics, 58(3), 397-422.
30. El-Hassar, S.M., Benyoucef, S.,
Heireche, H., Tounsi, A. (2016), “Thermal stability analysis of solar
functionally graded plates on elastic foundation using an efficient hyperbolic
shear deformation theory”, Geomechanics and Engineering, 10(3), 357-386.
31. Boukhari, A., Ait Atmane, H.,
Tounsi, A., Adda Bedia, E.A., Mahmoud, S.R. (2016), "An efficient shear
deformation theory for wave propagation of functionally graded material
plates", Structural Engineering and Mechanics, 57(5),
837-859.
32. Tounsi, A., Houari,
M.S.A., Kaci, A. (2015), “Comment on "A four-variable refined plate
theory for dynamic stability analysis of S-FGM plates based on physical neutral
surface" [Composite Structures. 131, 1081 – 1089 (2015)]”, Composite Structures, 131, 842 –
842. http://www.sciencedirect.com/science/article/pii/S0263822315005176
33. Al-Basyouni, K.S., Tounsi, A., Mahmoud, S. R. (2015), “Size dependent bending and vibration analysis
of functionally graded micro beams based on modified couple stress theory and neutral surface position”, Composite Structures, 125, 621 – 630. (http://www.sciencedirect.com/science/article/pii/S0263822315000021).
34. Mahi, A., Adda Bedia, E.A., Tounsi,
A. (2015), “A new hyperbolic shear deformation theory for bending and free
vibration analysis of isotropic, functionally graded, sandwich and laminated
composite plates”, Appl. Math. Modelling, 39, 2489 – 2508. (http://www.sciencedirect.com/science/article/pii/S0307904X14005393).
35. Adda Bedia, W., Benzair, A., Semmah, A., Tounsi, A., Mahmoud, S.R. (2015), “On the thermal buckling characteristics of armchair single-walled carbon
nanotube
embedded in an elastic medium based on nonlocal continuum elasticity”, Brazilian
Journal of Physics, 45, 225- 233. (http://link.springer.com/article/10.1007%2Fs13538-015-0306-2).
36. Ait
Yahia, S., Ait Atmane, H., Houari,
M.S.A., Tounsi, A. (2015), “Wave propagation in functionally
graded plates with porosities using various higher-order shear deformation
plate theories”, Structural Engineering and
Mechanics, 53(6),
1143 – 1165. (http://dx.doi.org/10.12989/sem.2015.53.6.1143).
37. Belkorissat, I., Houari, M.S.A., Tounsi,
A., Adda Bedia, E.A., Mahmoud, S.R.
(2015), “On vibration properties of
functionally graded nano-plate using a new nonlocal refined four variable
model”, Steel
and Composite Structures, 18(4), 1063 – 1081. (http://dx.doi.org/10.12989/scs.2015.18.4.1063).
38. Tagrara, S.H., Benachour, A.,
Bachir Bouiadjra, M., Tounsi, A. (2015), “On bending, buckling and
vibration responses of functionally graded carbon nanotube-reinforced composite
beams”, Steel and Composite Structures, 19(5), 1259-1277.
39. Hamidi,
A., Houari, M.S.A., Mahmoud, S.R., Tounsi, A. (2015), “A sinusoidal plate theory with 5-unknowns and stretching
effect for thermomechanical bending of functionally graded
sandwich plates”, Steel and Composite Structures, 18(1),
235 – 253. (http://dx.doi.org/10.12989/scs.2015.18.1.235).
40. Tebboune, W., Benrahou, K.H.,
Houari, M.S.A., Tounsi, A. (2015),
“Thermal buckling analysis of FG plates resting on elastic foundation based on
an efficient and simple trigonometric shear deformation theory”, Steel and
Composite Structures, 18(2), 443 – 465. (http://121.183.206.200:8080/proto.board/abstractArticleContentView?page=article&journal=scs&volume=18&num=2&ordernum=10&site=korsc).
41. Bourada, M., Kaci, A., Houari,
M.S.A., Tounsi, A. (2015), “A new simple shear and
normal deformations theory for functionally graded beams”, Steel and
Composite Structures, 18(2),
409 – 423. (http://121.183.206.200:8080/proto.board/abstractArticleContentView?page=article&journal=scs&volume=18&num=2&ordernum=8&site=korsc)
42. Bakora, A. and Tounsi, A.
(2015),” Thermo-mechanical post-buckling behavior of thick functionally graded
plates resting on elastic foundations”, Structural Engineering and
Mechanics, 56(1), 85-106.
43. Larbi Chaht, F., Kaci, A., Houari, M.S.A., Tounsi, A., Anwar Bég, O., Mahmoud, S.R. (2015), “Bending and buckling analyses of
functionally graded material (FGM) size-dependent nanoscale beams including the
thickness stretching effect”, Steel and Composite Structures,
18(2), 425 – 442. (http://121.183.206.200:8080/proto.board/abstractArticleContentView?page=article&journal=scs&volume=18&num=2&ordernum=9&site=korsc).
44. Attia, A., Tounsi, A.,
Adda Bedia, E.A.,, Mahmoud, S.R. (2015), “Free
vibration analysis of functionally graded plates with temperature-dependent
properties using various four variable refined plate theories”, Steel and Composite Structures, 18(1), 187 – 212. (http://121.183.206.200:8080/proto.board/abstractArticleContentView?page=article&journal=scs&volume=18&num=1&ordernum=10&site=korsc).
45. Bouguenina, O., Belakhdar, K, Tounsi,
A. and Adda Bedia, E.A. (2015), “Numerical analysis of FGM plates with
variable thickness subjected to thermal buckling”, Steel Compos. Struct.,
19(3), 679-695.
46. Ziane, N., Meftah, S.A., Ruta, G.,
Tounsi, A., Adda Bedia, E.A. (2015), “Investigation of the Instability of FGM
box beams” Structural Engineering and Mechanics, 54(3),
579 – 595. (http://121.183.206.200:8080/proto.board/abstractArticleContentView?page=article&journal=sem&volume=54&num=3&ordernum=11&site=korsc).
47. Ait Atmane, H., Tounsi, A.,
Bernard, F., Mahmoud, S.R. (2015), “A computational shear displacement model
for vibrational analysis of functionally graded beams with porosities”, Steel and Composite Structures, 19(2), 369 – 384.
48. Meradjah, M., Kaci, K., Houari,
M.S.A., Tounsi, A., Mahmoud, S.R. (2015), “A new higher order shear and
normal deformation theory for functionally graded beams”, Steel and Composite Structures, 18(3), 793 – 809.
49. Bouchafa, A., Bachir Bouiadjra,
M., Houari, M.S.A., Tounsi, A. (2015), “Thermal stresses and deflections
of functionally graded sandwich plates using a new refined hyperbolic shear
deformation theory”, Steel and Composite Structures, 18(6),
1493-1515.
50. Zemri, A., Houari, M.S.A.,
Bousahla, A.A., Tounsi, A. (2015), “A mechanical response of
functionally graded nanoscale beam: an assessment of a refined nonlocal shear
deformation theory beam theory”, Structural Engineering and Mechanics,
54(4), 693-710.
51. Aissani, K., Bachir Bouiadjra, M.,
Ahouel, M., Tounsi, A. (2015), “A new nonlocal hyperbolic shear
deformation theory for nanobeams embedded in an elastic medium”, Structural
Engineering and Mechanics, 55(4), 743-762.
52. Bessaim, A., Houari, M.S.A.,
Bernard, F., Tounsi, A. (2015), " A nonlocal quasi-3D trigonometric
plate model for free vibration behaviour of micro/nanoscale plates", Structural
Engineering and Mechanics, 56(2), 223-240.
53.
Bennai, R., Ait Atmane, H., Tounsi, A. (2015), “A new higher-order
shear and normal deformation theory for functionally graded sandwich beams” Steel
and Composite Structures, 19(3), 521-546.
54. M.A. Benatta, A. Kaci, A. Tounsi,, M.S.A. Houari, K. Bakhti, E.A.
Adda Bedia “Nonlinear bending analysis of functionally graded plates under
pressure loads using a four variable refined plate theory” International
Journal of Computational Methods, Vol 11(4), 1350062 (2014). http://www.worldscientific.com/doi/abs/10.1142/S021987621350062X
55. S. Benguediab, A. Semmah, F. Larbi
Chaht, S. Mouaz, A. Tounsi “An investigation on the
characteristics of bending, buckling and vibration of nanobeams via nonlocal
beam theory” International Journal of Computational Methods, Vol. 57 (2014) 21 – 24.
56. Semmah, A., Tounsi, A.,
Zidour, M., Heireche, H., Naceri, M. (2014), " Effect of the Chirality on
Critical Buckling Temperature of Zigzag Single-walled Carbon Nanotubes Using
the Nonlocal Continuum Theory", Fullerenes, Nanotubes and Carbon
Nanostructures, 23, 518–522.
57. Bousahla,
A.A., Houari, M.S.A., Tounsi, A., Adda Bedia, E.A., (2014), “A novel
higher order shear and normal deformation theory based on neutral
surface position
for bending analysis of advanced composite plates”, International Journal of Computational Methods, 11(6), 1350082.
58. S.R. Mahmoud, A.M. Abd-Alla, A. Tounsi, M. Marin “The problem of wave
propagation in magneto-rotating orthotropic non-homogeneous medium” Journal
of Vibration and Control, (2014) In press.
59. Y. Khalfi, M.S.A. Houari, A. Tounsi “A refined and simple shear
deformation theory for thermal buckling of solar functionally graded plates on
elastic foundation” International Journal of Computational Methods, 11(5), 1350077 (2014).
60. S.R. Mahmoud, A. Tounsi, M. Marin,
S.I. Ali, A.T. Ali “Effect of Magnetic Field and Initial Stress on Radial
Vibrations in Rotating Orthotropic Homogeneous Hollow Sphere” Journal of Computational
and Theoretical Nanoscience, 11 (2014) 1524-1529.
61. A.
Fekrar, M.S.A. Houari, A. Tounsi, S.R. Mahmoud "A new
five-unknown refined theory based on neutral surface position for bending
analysis of exponential graded plates” Meccanica, Vol. 49 (2014) 795 – 810.
62. H. Hebali,
A. Tounsi, M.S.A. Houari, A. Bessaim,
E.A. Adda Bedia “New quasi-3D
hyperbolic shear deformation theory for the static and free vibration analysis
of functionally graded plates” Journal
of Engineering Mechanics (ASCE), Vol. 140 (2014) 374 – 383.
63. S. Benguediab, A. Tounsi, M. Zidour, A.
Semmah "Chirality and scale effects on
mechanical buckling properties of zigzag double-walled carbon nanotubes" Composites Part B:
Engineering, Vol. 57 (2014) 21 – 24.
64. Z.
Belabed, M.S.A. Houari, A. Tounsi, S.R. Mahmoud, O. Anwar Bég "An
efficient and simple higher order shear and normal deformation theory for
functionally graded material (FGM) plates” Composites: Part B 60 (2014)
274–283.
65. M. Zidi, A. Tounsi, M.S.A.
Houari, E.A. Adda Bedia, O. Anwar Bég “Bending analysis of FGM plates under
hygro-thermo-mechanical loading using a four variable refined plate theory” Aerospace
Science and Technology 34 (2014) 24–34.
66. L. Hadji, T.H. Daouadji, A.
Tounsi, E.A. Bedia “A higher order shear deformation theory for static and
free vibration of FGM beam” Steel and Composite Structures, 16(5), 507-519,
(2014).
67. M. Ait Amar Meziane, H.H.
Abdelaziz, A. Tounsi “An efficient and simple refined theory for
buckling and free vibration of exponentially graded sandwich plates under
various boundary conditions“ Journal of Sandwich Structures and
Materials, 16(3), 293 – 318 (2014).
68. Draiche, K., Tounsi, A., Khalfi,
Y. (2014), “A trigonometric four variable plate theory for free
vibration of rectangular composite plates with patch mass”, Steel and
Composite Structures, 17(1), 69-81.
69. B. Guenaneche, A. Tounsi,
E. A. Adda Bedia “Effect of shear deformation on interfacial stress analysis in plated
beams under arbitrary loading“ International Journal of Adhesion and Adhesives,
Vol. 48 (2014) 1 – 13.
70. K. Nedri, N. El Meiche, A. Tounsi “Free
vibration analysis of laminated composite plates resting on elastic foundations
by using a refined hyperbolic shear deformation theory” Mechanics of Composite Materials, 49(6), 641 – 650 (2014).
71. S. Benyoucef, A. Tounsi, R.
Yeghnem, M. Bachir Bouiadjra, E.A. Adda Bedia “An analysis of interfacial
stresses in steel beams bonded with a thin composite plate under
thermomechanical loading” Mechanics of Composite Materials, 49(6), 629 – 640 (2014).
72. A. Kaci, K. Belakhdar, A.
Tounsi, E.A. Adda Bedia “Nonlinear cylindrical bending analysis of E-FGM
plates with variable thickness” Steel and Composite Structures, Vol.
16, No. 4 (2014) 339-356.
73. L. Boumia, M. Zidour, A. Benzair, A.
Tounsi “A Timoshenko beam model for vibration analysis of chiral
single-walled carbon nanotubes” Physica E 59 (2014) 186–191.
74. M.
Zidour, T.H. Daouadji, K.H. Benrahou, A. Tounsi, E.A. Adda Bedia, L. Hadji
“Buckling analysis of chiral single-walled carbon nanotubes by using the
nonlocal Timoshenko beam theory” Mechanics of Composite Materials, 50(1), 95 – 104 (2014).
75. A. Semmah,
A. Tounsi, M. Zidour, H.
Heireche, M. Naceri “Effect of chirality on critical buckling temperature of a
zigzag single-walled carbon nanotubes using nonlocal continuum theory” Fullerenes, Nanotubes and Carbon
Nanostructures, 23, 518 – 522 (2014).
76. T. Hassaine Daouadji, A. Tounsi, E.A. Adda Bedia "Analytical
solution for bending analysis of functionally graded plates" Scientia Iranica, (2013) In press.
77. H. Baghdadi, A. Tounsi, M. Zidour,
A. Benzair “Thermal effect on vibration characteristics of armchair and zigzag
single walled carbon nanotubes using nonlocal parabolic beam theory” Fullerenes, Nanotubes and Carbon
Nanostructures, 23, 266 – 272 (2014).
78. R. Bachir Bouiadjra, E.A. Adda
Bedia, A. Tounsi, “ Nonlinear thermal buckling behavior of functionally
graded plates using an efficient sinusoidal shear deformation theory” Structural
Engineering and Mechanics, Vol. 48 (2013) 547 – 567.
79. A. Tounsi, A. S. Benguediab, M.S.A. Houari, A. Semmah, “A new nonlocal beam theory
with thickness stretching effect for nanobeams” International Journal of
Nanoscience, Vol 12 (2013) 1350025.
80. A. Tounsi, E.A. Adda Bedia, S.R. Mahmoud, S. Amziane "Mathematical Modeling and
Optimization of Functionally Graded Structures" Mathematical Problems
in Engineering, Volume 2013 (2013), Article ID 536867, 2 pages
81. M.S.A. Houari, A. Tounsi, O. Anwar Bég “Thermoelastic bending analysis of functionally graded sandwich plates
using a new higher order shear and normal deformation theory” International Journal of
Mechanical Sciences, Vol. 76 (2013) 467 – 479.
82. M. Bouremana, M.S.A. Houari, A.
Tounsi, A. Kaci, E.A. Adda Bedia, “A new first shear deformation beam
theory based on neutral surface position for functionally graded beams” Steel
and Composite Structures, Vol. 15, No. 5 (2013) 399-423.
83. A. Bessaim, M.S.A. Houari, A. Tounsi, S.R Mahmoud, E.A. Adda Bedia “A
new higher-order shear and normal deformation theory for the static and free
vibration analysis of sandwich plates with functionally graded isotropic face
sheets” Journal of Sandwich Structures and Materials, Vol. 15, No. 6 (2013)
671 – 703.
84. F.Z. Kettaf, M.S.A. Houari, M.
Benguediab, A. Tounsi “Thermal buckling of functionally graded sandwich
plates using a new hyperbolic shear displacement model” Steel and Composite
Structures, Vol. 15, No. 4 (2013) 399-423.
85. H.M. Berrabah, A. Tounsi,
A. Semmah, E.A. Adda Bedia “Comparison of various refined nonlocal beam
theories for bending, vibration and buckling analysis of nanobeams“Structural
Engineering and Mechanics, Vol. 48, No. 3 (2013) 351 – 365.
86. A. Tounsi, A.
Semmah, A.A. Bousahla” Thermal buckling behavior of nanobeam using an efficient
higher-order nonlocal beam theory” Journal of Nanomechanics and
Micromechanics (ASCE), Vol 3), (2013) 37 – 42.
87. A. Tounsi, S.
Benguediab, E.A. Adda Bedia, A. Semmah, M. Zidour “Nonlocal effects on thermal
buckling properties of double-walled carbon nanotubes” Advances in Nano
Research, Vol 1(1), (2013) 1 – 11.
88. A. Tounsi, M.S.A. Houari, S. Benyoucef, E.A.
Adda Bedia, "A
refined trigonometric shear deformation theory for thermoelastic bending of
functionally graded sandwich plates" Aerospace Science and Technology, Vol
24, (2013) 209 – 220.
89. H. Saidi, M.S.A. Houari, A. Tounsi, E.A. Adda Bedia
“Thermo-mechanical bending response with stretching effect of functionally
graded sandwich plates using a novel shear deformation theory” Steel and
Composite Structures, Vol 15, (2013) 221-245
90. K. Bakhti, A. Kaci, A.A. Bousahla,
M.S.A. Houari, A. Tounsi, E.A. Adda Bedia “Large deformation analysis for
functionally graded carbon nanotube-reinforced composite plates using an
efficient and simple refined theory” Steel and Composite Structures, Vol
14(4), (2013) 335 – 347.
91. N. Ziane, S.A. Meftah,H.A.
Belhadj, A. Tounsi, E.A. Adda Bedia “Free vibration analysis of thin and
thick-walled FGM box beams” International Journal of Mechanical Sciences 66
(2013) 273–282.
92. T.H. Daouadji, A. Tounsi,
E.A. Adda Bedia “A New Higher Order Shear Deformation Model for Static Behavior
of Functionally Graded Plates” Advances in Applied Mathematics and
Mechanics, Vol 5(3), (2013) 351 – 364.
93. L. Ould
Larbi, A. Kaci, M.S.A.
Houari, A.
Tounsi “An efficient
shear deformation beam theory based on neutral surface position for bending and free vibration of functionally
graded beams” Mechanics
Based Design of Structures and Machines, 41 (2013) 421–433.
94. M. Derras, A. Kaci, K. Draiche, A.
Tounsi “Non-linear
analysis of functionally graded plates in cylindrical bending based on a new
refined shear deformation theory” Journal of Theoretical and Applied Mechanics, Vol 51 (2), (2013), 339 – 348.
95. B. Krour, F. Bernard, A. Tounsi
“Fibers orientation optimization for concrete beam strengthened with a CFRP
bonded plate: A coupled analytical–numerical investigation” Engineering Structures,
56 (2013) 218–227.
96. A. Kaci, K. Bakhti, H. Hebali, A.
Tounsi “Mathematical solution for nonlinear cylindrical bending of sigmoid
functionally graded plates” Journal of Applied Mechanics and Technical
Physics, Vol. 54(1), (2013) 124 – 131.
97. A. Kaci, K. Draiche, M. Zidi, M.
S. A. Houari, A. Tounsi “An efficient and simple refined theory for
nonlinear bending analysis of functionally graded sandwich plates” Journal
of Applied Mechanics and Technical Physics, Vol. 54(5), (2013) 847 – 856.
98. R. Yeghnem, S. A. Meftah, A. Tounsi, E. A. Adda Bedia “A Finite-Element Model for the Lateral Stiffness and
Vibration Characteristics of RС Shear Walls Strengthened with Composite
Sheets: Creep and the Shrinkage Effect” Mechanics of Composite Materials, 49 (2013)
181-192.
99.
B. Bouderba, M.S.A Houari, A. Tounsi, “Thermomechanical
bending response of FGM thick plates resting on Winkler–Pasternak elastic
foundations” Steel
and Composite Structures, Vol 14(1), (2013) 85 – 104.
100.
A.
Fekrar, N. El Meiche, A. Bessaim, A. Tounsi,
and E. A. Adda Bedia Buckling
analysis of functionally graded hybrid composite plates using a new four
variable refined plate theory” Steel and Composite Structures, Vol 13(1),
(2012) 91 – 107.
101.
Y. Gafour, M. Zidour, A. Tounsi, H. Heireche, A. Semmah “Sound wave propagation in zigzag
double-walled carbon nanotubes embedded in an elastic medium using nonlocal
elasticity theory” Physica E: Low-dimensional
Systems and Nanostructures, 48, (2013) 118 – 123.
102.
R Menaa, A. Tounsi, F. Mouaici, I. Mechab, M. Zidi, E.A. Adda Bedia. Analytical solutions for static shear correction factor of functionally
graded rectangular beams. Mechanics of
Advanced Materials and Structures 19(8), (2012)
641 – 652.
103.
H.D. Tahar, H.H Abdelaziz, A. Tounsi, E.A. Adda Bedia, "Elasticity Solution of a Cantilever Functionally
Graded Beam" Applied Composite Materials, 20(1),
(2012) 1 – 15.
104.
H. Youzera, S.A. Meftah, N. Challamel, A.
Tounsi “Nonlinear damping and forced vibration analysis of laminated
composite beams” Composites: Part B, 43 (2012) 1147–1154
105.
B.
Fahsi, A. Kaci, A. Tounsi, E.A. Adda Bedia “A four variable refined
plate theory for nonlinear cylindrical bending analysis of functionally graded
plates under thermomechanical loadings” Journal of Mechanical Science and
Technology, 26 (2012) 4073 – 4079.
106.
M.
Bachir Bouiadjra, M.S.A. Houari, A. Tounsi, “Thermal buckling of
functionally graded plates according to a four-variable refined plate theory” Journal
of Thermal Stresses, 35 (2012) 677–694.
107.
M. Zidour, K.H. Benrahou, A.
Semmah, M. Naceri, H. A. Belhadj, K. Bakhti, A. Tounsi, “The thermal effect on vibration of zigzag single walled
carbon nanotubes using nonlocal Timoshenko beam theory” Computational Materials Science 51 (2012) 252–260.
108.
M. Bourada, A. Tounsi, M.S.A. Houari, E.A. Adda Bedia, "A new four-variable refined plate theory for
thermal buckling analysis of functionally graded sandwich plates" Journal of Sandwich Structures and
Materials 14 (2012) 5 - 33.
109.
S.A.
Meftah, El Mostafa Daya, A. Tounsi,
"Finite
element modelling of sandwich box column with viscoelastic layer for passive
vibrations control under seismic loading" Thin-Walled Structures (51) (2012) 174-185.
110.
A.
Kaci, A. Tounsi, K. Bakhti,
E.A. Adda Bedia “Nonlinear cylindrical bending of functionally graded carbon
nanotube-reinforced composite plates” Steel and Composite Structures, 12
(2012) 491 – 504.
111.
B. Kerboua, E.A. Adda bedia, A. Tounsi, Z. Sereir, "Thermal
impact and the fiber orientation effect of structures reinforced by composites
FRP, the new prestressed laminates model" Journal of Thermoplastic Composite Materials, 25 (2012) 491 – 504.
112.
S. Merdaci, A.
Tounsi, M.S.A. Houari, I. Mechab, H. Hebali, S. Benyoucef, "Two
new refined shear displacement models for functionally graded sandwich
plates" Archive
of Applied Mechanics 81 ( 2011) 1507 – 1522.
113.
M.S.A. Houari, S. Benyoucef, I. Mechab, A. Tounsi,
and El Abbas Adda Bedia “Two-variable refined plate theory for thermoelastic
bending analysis of functionally graded sandwich plates” Journal of Thermal
Stresses, 34 (2011) 315–334.
114.
H.
Ait Atmane, A. Tounsi, N. Ziane, I. Mechab “Mathematical
solution for free vibration of sigmoid functionally graded beams with varying
cross-section” Steel and Composite Structures, 11 (2011).
115.
K. Belakhdar, A. Tounsi, E. A. Adda Bedia, and R. Yeghnem “Effect of tapered-end
shape of FRP sheetson stress concentration in strengthened beams” Steel and
Composite Structures, 11 (2011) 435 – 454.
116.
A. Besseghier, A. Tounsi, M.S.A. Houari, A. Benzair, L. Boumia, H. Heireche,
"Thermal
effect on wave propagation in double-walled carbon nanotubes embedded in a
polymer matrix using nonlocal elasticity" Physica E: Low-dimensional Systems and
Nanostructures, 43 (2011)
1379-1386.
117.
M. Naceri, M. Zidour, A. Semmah, M.S.A.
Houari, A. Benzair, A. Tounsi,
“Sound wave propagation in armchair single walled carbon nanotubes under
thermal environment” JOURNAL OF APPLIED
PHYSICS 110, 124322 (2011).
118.
M. Maachou, M. Zidour, H. Baghdadi, N. Ziane, A. Tounsi, “A nonlocal Levinson beam
model for free vibration analysis of zigzag single-walled carbon nanotubes
including thermal effects” Solid State
Communications 151 (2011) 1467–1471.
119.
N. El Meiche, A. Tounsi, N. Ziane, I. Mechab, E.A. Adda.Bedia, "A new
hyperbolic shear deformation theory for buckling and vibration of functionally
graded sandwich plate"
International
Journal of Mechanical Sciences 53 (2011) 237-247.
120.
M. Ameur, A. Tounsi, I. Mechab, E.A. Adda Bedia, “A New Trigonometric Shear Deformation
Theory for Bending Analysis of Functionally Graded Plates Resting on Elastic
Foundations” KSCE
Journal of Civil Engineering (2011) 15(8):1405-1414.
121.
A. Benachour, H. Daouadji Tahar, H. Ait
Atmane, A. Tounsi, S.A. Meftah, "A four
variable refined plate theory for free vibrations of functionally graded plates
with arbitrary gradient" Composites Part B: Engineering, 42, (2011) 1386-1394.
122.
H. Ait Atmane, A. Tounsi, S.A. Meftah, H.A.
Belhadj, “Free vibration behavior of exponential functionally graded beams with
varying cross-section” Journal of Vibration and Control, 17(2),
(2011) 311–318.
123.
L. Hadji, H. A. Atmane,
A. Tounsi, I. Mechab;E. A. Adda Bedia, "Free vibration of functionally graded sandwich plates using four-variable
refined plate theory" Applied Mathematics and Mechanics 32 (2011) 7925-942.
124.
H.H. Abdelaziz, H. Ait Atmane, I. Mechab, L.
Boumia, A. Tounsi, E.A. Adda Bedia, "Static
Analysis of Functionally Graded Sandwich Plates Using an Efficient and Simple
Refined Theory"
Chinese
Journal of Aeronautics 24, (2011) 434-448.
125.
A. Tounsi, H.
Heireche, H. Benhassaini, M. Missouri, "Vibration and length-dependent
flexural rigidity of protein microtubules using higher order shear deformation
theory” Journal of Theoretical Biology
266 (2010) 250–255.
126.
H. Heireche, A. Tounsi, H. Benhassaini, A. Benzair, M. Bendahmane, M. Missouri,
S. Mokadem, "Nonlocal elasticity effect on vibration characteristics of
protein microtubules” Physica E: Low-dimensional
Systems and Nanostructures, 42 (2010) 2375–2379.
127.
K. Amara, A.
Tounsi, I. Mechab, E.A. Adda-Bedia, “Nonlocal elasticity effect on column
buckling of multiwalled carbon nanotubes under temperature field” Applied Mathematical Modelling 34 (2010)
3933–3942.
128.
A. Mahi, E.A. Adda Bedia, A. Tounsi, I. Mechab, “An analytical method for
temperature-dependent free vibration analysis of functionally graded beams with
general boundary conditions” Composite
Structures 92 (2010) 1877–1887.
129.
H.
Ait Atmane, A. Tounsi, I. Mechab, E.A. Adda Bedia, “Free vibration
analysis of functionally graded plates resting on Winkler–Pasternak elastic
foundations using a new shear deformation theory” International Journal of
Mechanics and Materials in Design 6 (2010) 113–121.
130.
A. Bouchafa, A. Benzair, A. Tounsi, K. Draiche, I. Mechab, E.A. Adda Bedia “Analytical
modelling of thermal residual stresses in exponential functionally graded
material system” Materials and Design 31
(2010) 560–563.
131.
B. Krour, A. Tounsi, S. Benyoucef, E.
A. Adda Bedia, “An improved closed-form solution to interfacial stresses in RC
beams strengthened with a composite plate” Mechanics of Composite
Materials, Vol. 46, No. 3, 2010.
132.
B. Guenaneche, B. Krour, A. Tounsi, A. Fekrar,
S. Benyoucef, E.A. Adda Bedia, “Elastic analysis of interfacial stresses for
the design of a strengthened FRP plate bonded to an RC beam” International Journal of Adhesion &
Adhesives 30 (2010) 636–642.
133.
B. Kerboua, E.A. Adda Bedia and A. Tounsi, “Impact of the Fiber-reinforced Plastic (FRP) and the Thermal Effect for
the Interfacial Stresses” Journal of Reinforced Plastics and
Composites 2010; 29; 921 – 935.
134.
K. Belakhdar, A.
Tounsi, S. Benyoucef, E. A. Adda
Bedia and S. M. El Hassar “On the Reduction of the Interfacial Stresses in a
Repaired Beam with an Adhesively Bonded FRP Plate” Composite Interfaces 17 (2010)
1–14.
135.
H.M. Berrabah, I. Mechab, A. Tounsi, S. Benyoucef, B. Krour, A. Fekrar, E.A. Adda Bedia,
“Electro-elastic stresses in composite active beams with functionally graded
layer” Computational Materials Science
48 (2010) 366–371.
136.
S.
Benyoucef, I. Mechab, A. Tounsi, A. Fekrar, H. Ait Atmane, E.A. Adda Bedia
“Bending of thick functionally graded plates resting on Winkler–Pasternak
elastic foundations” Mechanics of Composite Materials 46 (2010)
425 – 434.
137.
A. Tounsi, et al. Comment on “Free transverse vibration of the fluid-conveying
single-walled carbon nanotube using nonlocal elastic theory” [J. Appl. Phys.
103, 024302 2008] J. Appl. Phys. 105, 126105 (2009).
138.
A. Tounsi et al. Comment on “Vibration analysis of fluid-conveying double-walled
carbon nanotubes based on nonlocal elastic theory” J. Phys.: Condens. Matter 21 (2009).
139.
B-O. Sallai, A. Tounsi, I. Mechab,
M. Bachir Bouiadjra, M. Meradjah, E.A.
Adda Bedia “A theoretical analysis of flexional bending of Al/Al2O3
S-FGM thick beams” Computational Materials Science 44 (2009)
1344–1350.
140.
R. Yeghnem, S.A. Meftah, A.
Tounsi, E.A. Adda Bedia “Earthquake Response of RC Coupled Shear Walls
Strengthened with Thin Composite Plates” Journal
of Vibration and Control, (2009), Vol. 15(7): 963 – 984.
141.
B. Kerboua, E.A. Adda bedia, A. Tounsi “Interfacial
stresses in externally FRP-plated structures: Effect of shear deformations and
fiber orientation" Mecanique et Industries 10 (2009) , pp. 325-335.
142.
H.Heireche, A.Tounsi, A.Benzair, M.Maachou, E.A.Adda Bedia “Sound Wave
Propagation in Single- Walled Carbon Nanotubes using Nonlocal Elasticity” Physica
E: Low-dimensional Systems and
Nanostructures, Vol 40:
2791, Elsevier edition, 2008.
143.
H.Heireche, A.Tounsi, A.Benzair “Scale Effect on Wave propagation of
Double–Walled Carbon Nanotubes with Initial Axial Loading” Nanotechnology, Vol 19:
185703, IOP Publishing, 2008.
144.
H.Heireche, A.Tounsi, A.Benzair, I. Mechab “Sound Wave Propagation in Single –
Carbon Nanotubes with Initial Axial Stress” Journal of Applied Physics, 104: 014301, American Institute of Physics,
2008.
145.
A. Tounsi, H.
Heireche, H. M. Berrabah, A. Benzair, L. Boumia “Effect of small size on wave propagation in double-walled carbon
nanotubes under temperature field” Journal
of Applied Physics, 104: American
Institute of Physics, 2008.
146.
I. Mechab, A. Tounsi, M.A. Benatta,
E.A. Adda Bedia “Deformation of Short Composite Beam using Refined Theories” Journal of Mathematical Analysis and
Applications, Vol 346: 468 –
479, Elsevier edition, 2008.
147.
S. Benyoucef, A. Tounsi, K.H. Benrahou,
E.A. Adda Bedia “Time – Dependent Behavior of RC
Beams Strengthened with Externally Bonded FRP Plates: Interfacial Stresses
Analysis” Mechanics of Time – Dependent
Materials, Vol 11: 1573 – 2738, Springer edition, 2008.
148.
M.A. Benatta, I. Mechab, A.Tounsi, E.A. Adda Bedia “Static Analysis of Functionally Graded
Short Beams Including Warping and Shear Deformation Effects” Computational
Materials Science, Vol 44: 465 –
773, Elsevier edition, 2008.
149.
A. Benachour, S. Benyoucef, A. Tounsi, E.A. Adda bedia,
“Interfacial stress analysis of steel beams reinforced with bonded prestressed
FRP plate” Engineering Structures 30
(2008) 3305 – 3315.
150.
M. Bouremana, A. Tounsi, A. Kaci, I. Mechab
“Controlling thermal deformation by using composite materials having variable
fiber volume fraction” Materials &
Design, (In press), Elsevier
edition, 2008.
151.
A. Benkhedda, A. Tounsi, E.A. Adda Bedia “Effect of Temperature and Humidity on
Transient Hygrothermal Stresses during Moisture Desorption in Laminated
Composite Plates” Composite Structures, Vol 82: 629 – 635, Elsevier edition, 2008.
152.
E. A. Adda Bedia , M. Bouazza, A. Tounsi,
A. Benzair, M. Maachou “Prediction of Stiffness
Degradation in Hygrothermal Aged [θm/90n]S
Composite Laminates with Transverse Cracking” Journal of Materials Processing Technology, Vol 199: 199 – 205, Elsevier edition, 2008.
153.
A. Tounsi, S. Benyoucef “Interfacial Stresses in
Externally Plated Concrete Beams” International Journal of Adhesion and
Adhesives, Vol 27: 207 – 215, Elsevier edition, 2007.
154.
S.A. Meftah, A. Tounsi “Lateral
Stiffness and Vibration Characteristics of Damaged RC Coupled Shear Walls
Strengthened with Thin Composite Plates” Buildings & Environment,
Vol 42: 3596 – 3605, Elsevier edition,
2007.
155.
S Benyoucef, A. Tounsi, E. A. Adda Bedia
, S. A. Meftah, “ Creep and Shrinkage Effect on Adhesive Stresses in RC Beams
Strengthened with Composite Laminates”, Composites
Science and Technology, Vol 67(6): 933 – 942, Elsevier edition, 2007.
156.
S.A. Meftah, A. Tounsi, E. A. Adda
Bedia “A Simplified Method for Seismic Calculation of a Tall Building Braced by
Shear Walls and Thin – Walled Open Section Structures” Engineering
Structures, Vol 29: 2576 – 2585, Elsevier
edition, 2007.
157.
M. Fellah, A. Tounsi, KH, Amara, E. A.
Adda Bedia “Effect of Transverse Cracks on the Effective Thermal
Expansion Coefficient of Aged Angle – Ply Composites Laminates” Theoretical
and Applied Fracture Mechanics, Vol
48: 32 – 42, Elsevier edition, 2007.
158.
M. Bouazza, A. Tounsi, A. Benzair, E.A.
Adda bedia “Effect of Transverse Cracking on Stiffness Reduction of
Hygrothermal Aged Cross – Ply Laminates” Materials
& Design, Vol 28: 1116 – 1123, Elsevier
edition, 2007.
159.
S.A. Meftah, R. Yeghnem, A. Tounsi, E.
A. Adda Bedia, “ Seismic Behaviour of RC
Coupled Shear Walls Repaired with CFRP Laminates Having Variable Fibres
Spacing”, Construction and Building Materials, Vol 21(8): 1661 – 1671, Elsevier edition, 2007.
160.
A. Megueni, A. Tounsi, E. A. Adda Bedia
“Evolution of the Stress Intensity
Factor for Patched Crack with Bonded Hygrothermal Aged Composite Repair” Materials & Design, Vol 28: 287 – 293, Elsevier edition, 2007.
161.
M. Ait Ameur Meziane, S. Benyoucef, A.
Tounsi, E.A Adda Bedia, “Analysis of Adhesion Stresses for
Design of RC Beam Bonded with Thin Composite Plate”, Multidiscipline
Modelling in materials and structures, Vol 3(1): 55 – 77, Springer
(BRILL), 2007.
162.
A. Tounsi “Improved Theoretical Solution for Interfacial Stresses in Concrete Beams
Strengthened with FRP Plate” International Journal of Solids and Structures,
Vol 43: 4154 – 4174, Elsevier edition, 2006.
163.
A. Tounsi, KH
Amara, A. Megueni, A. Benzair “On
the Transverse Cracking and Stiffness Degradation of Aged Angle – Ply
Laminates” Materials Letters, Vol 60: 2561 – 2564, Elsevier edition, 2006.
164.
S.A.
Meftah, A. Tounsi and E. A. Adda Bedia, “Dynamic Behaviour of Stiffened
and Damaged Coupled Shear Walls” Computers Concrete, Vol 3 N°5: 1 – 15, Techno press edition, 2006.
165.
S. Benyoucef, A. Tounsi,
S.A. Meftah, E.A. Adda bedia “Approximate Analysis of the Interfacial Stress
Concentrations in FRP – RC Hybrid Beams” Composites Interfaces, Vol 13 (7): 561 – 571, Brill edition, 2006.
166.
A. Benzair , M. Maachou,
KH Amara, A. Tounsi “Effect of Transverse Cracks on the Elastic
Properties of High Temperature Angle – Ply Laminated Composites” Computational
Materials Science, Vol 37: 470 –
475, Elsevier edition, 2006.
167.
KH Amara, A. Tounsi, A. Megueni, E. Adda bedia “Effect of Transverse Cracks
on the Mechanical Properties of Angle – Ply Composites Laminates” Theoretical
and Applied Fracture Mechanics, Vol 45: 72 – 78, Elsevier edition, 2006.
168.
S.A.Meftah, A. Tounsi, A. Megueni, E. Adda bedia “Lateral Stiffness and
Vibration Characteristics of RC Shear Walls Bonded with Thin Plates” International
Journal of Composite Structures, Vol 73: 110 – 119, Elsevier edition,
2006.
169.
Z. Sereir, E. Adda bedia, A. Tounsi “Effect Of Temperature On The
Hygrothermal Behaviour Of Unidirectional Laminated Plates With Asymmetrical
Environmental Conditions ” International Journal of Composite Structures,
Vol 72: 383 – 392, Elsevier edition, 2006.
170.
Z. Sereir, A. Tounsi, E. A. Adda Bedia ‘’ Effect of the
Cyclic Environmental Conditions on the Hygrothermal Behaviour of the Symmetric
Hybrid Composites" Mechanics of
Advanced Materials and Structures, Vol (13): 1 – 12, Taylor & Francis edition, 2006.
171.
KH
Benrahou, E. A. Adda Bedia, A. Tounsi, M. Benguediab, “ Interfacial
Stresses in Damaged RC Beams Strengthened with Externally Bonded CFRP Plate”, Materials
Science & Engineering part : A, Vol 432: 12 – 19, Elsevier edition, 2006.
172.
A. Tounsi, KH
Amara, E.A. Adda Bedia,’’ Analysis of Transverse Cracking and Stiffness Loss in
Cross-Ply Laminates with Hygrothermal Conditions’’ Computational Materials
Science, Vol 32: 167 – 174, Elsevier edition, 2005.
173.
A. Tounsi, KH Amara
“Stiffness
Degradation in Hygrothermal Aged Cross – Ply Laminates with Transverse Cracks” AIAA
Journal (American Institute of Aeronautics and Astronautics), Vol
43(8): 1836 – 1843, 2005.
174.
A. Tounsi, M.
Bouazza, S.A.Meftah, E. Adda-bedia “On The Transient Hygroscopic Stresses In
Polymer Matrix Laminated Composites Plates With Cyclic And Unsymmetric
Environmental Conditions” Polymer & Polymer Composites, Vol 13(5):
489 – 504, Rapra Technology LTD (UK), 2005.
175.
KH Amara, A. Tounsi, A. Benzair “Transverse Cracking and Elastic Properties
Reduction in Hygrothermal Aged Cross – Ply Laminates” ” Materials Sciences
& Engineering A, Vol 396, pp: 369 – 375, Elsevier edition, 2005.
176.
A. Tounsi, E. Adda
bedia, A. Benachour “A New Computational Method For Prediction Of Transient
Hygroscopic Stresses During Moisture Desorption In Laminated Composite Plates
With Different Degrees Of Anisotropy” Journal of Thermoplastic Composite
Material, Vol 18 (1): 37 – 58, Sage Publication (American Society for
Composites), 2005.
177.
Z. Sereir, E. Adda bedia, A. Tounsi “Effect of the Accelerated Moisture Diffusivity on the Hygrothermal
Behaviour of Laminated Plate with Symmetrical Environmental Conditions” Journal
of Thermal Stresses, Vol 28(9): 889 – 910, Taylor & Francis
edition, 2005.
178.
A. Tounsi, M.
Bouazza, E. Adda-bedia “Computation Of Transient Hygroscopic Stresses In
Unidirectional Laminated Composite Plates With Cyclic And Unsymmetric
Environmental Conditions” International Journal of Mechanics & Material
in Design, Vol 1: 271 – 286, Springer edition, 2004.
179.
E. Adda Bedia, A. Tounsi, K.H.
Amara, S.A. Meftah “Transverse Cracking and Stiffness Loss in Hygrothermal
Aged Cross-ply Laminates” International journal of Materials Science and
technology, Vol 20 (1): 111 – 113, 2004.
180.
A. Megueni, A. Tounsi, B.B Bouiadjra, B. Serier “The Effect Of A Bonded
Hygrothermal Aged Composite Patch On The Stress Intensity Factor For Repairing
Cracked Metallic Structures”
International Journal of Composite Structures, Vol 62 (2): 171 –
176, Elsevier edition, 2003.
181.
A. Tounsi, E.A Adda
Bedia “Some Observations on the Evolution of Transversal Hygroscopic Stresses
in Laminated Composites Plates: Effect of Anisotropy” International Journal
of Composite Structures, Vol 59: 445
– 454, Elsevier edition, 2003.
A. Tounsi, E. Adda
bedia “Simplified Method for Prediction on Transient Hygroscopic Stresses in
Polymer Matrix Composites with Symmetric Environmental Conditions” Applied
composites materials, Vol 10 (1): 1
– 18, Kluwer
Academic Publisher, 2003.
182.
A Tounsi, E. A
Adda Bedia, Z. Sereir, H. Benhassaini ”Effect of Fibre Orientation and Cyclic
Environmental Conditions on the Non-Mechanical Residual Stresses in Resin
Matrix Composite Panels” The Arabian Journal for science engineering, Vol 28(1A): 1 – 21, 2003.
183.
A. Tounsi, E.A Adda
Bedia, G. Verchery “Influence of Anisotropy on the Transient Hygroscopic
Stresses in Polymer Matrix Composite with Cyclic Environmental Conditions” International
Journal of Composite Structures, Vol 55 (4): 393 – 405, Elsevier edition,
2002.