Office:

Building: 3

Room: 219-1

Phone: + 966 3 860 2305

Fax: + 966 3 860 4447

 

Mailing Address:

Department of Petroleum Engineering

P. O. Box 2020

King Fahd University of Petroleum& Minerals

Dhahran 31261

Saudi Arabia

 

Email:menamul@kfupm.edu.sa

 

Site Counter

 

1)         Hossain, M.E., Tamim, M. and Rahman, N.M.A., “Effects of Criterion Values on Estimations of the Radius of Drainage and Stabilization Time”. Journal of Canadian Petroleum Technology. Vol. 46, No. 3, March, (2007), pp. 24 – 30.  PDF

 

2)         Hossain, M.E., Mousavizadegan, S.H. Ketata, C. and Islam, M.R., “A Novel Memory Based Stress-Strain Model for Reservoir Characterization”. Journal Nature Science and Sustainable Technology. Vol. 1, No. 4, (2007), pp. 653 – 678. PDF 

  

3)         Hossain, M.E. and Islam, M.R., “An Alternative Fuel for Motor Vehicles”, Energy Sources, Part A: Recovery, Utilization and Environmental Effect. Vol. 30, No. 10, (2008), pp. 942 – 953. PDF

 

4)         Hossain, M.E., Mousavizadegan, S.H. and Islam, M.R., “Rock and Fluid Temperature Changes during Thermal Operations in EOR Processes”, Journal Nature Science and Sustainable Technology. Vol. 2, No. 3, March, (2008), pp. 347 – 378. PDF 

 

5)         Hossain, M.E., Mousavizadegan, S.H. and Islam, M.R., “The Effects of Thermal Alterations on Formation Permeability and Porosity”, Petroleum Science and Technology. Vol. 26, No. 10-11, (2008), pp. 1282 – 1302. PDF

 

6)         Rahman, M.S., Hossain, M.E. and Islam, M.R., “An Environment-Friendly Alkaline Solution for Enhanced Oil Recovery (EOR)”, Petroleum Science and Technology. Vol. 26, No. 13, (2008), pp. 1596 – 1609.  PDF 

 

7)         Hossain, M.E., Ketata, C., Khan, M.I. and Islam, M.R., “Flammability and Individual Risk Assessment for Natural Gas Pipelines”, Advances in Sustainable Petroleum Engineering Science. Vol. 1, No. 1, (2009). pp. 33 – 44.  PDF

 

8)         Hossain, M.E., Rahman, M.S., Ketata, C., Mann, H. and Islam, M.R., “SEM-Based Structural and Chemical Analysis of Paraffin Wax and Beeswax for Petroleum Applications”, Journal of Characterization and Development of Novel Materials. Vol. 1, No. 1, (2009), pp. 21 – 38. PDF 

 

9)         Hossain, M.E., Rahman, M.S., Ketata, C. and Islam, M.R., “Molecular Structure Evaluation of Beeswax and Paraffin Wax by Solid-State 13C CP/MAS NMR”, Journal of Characterization and Development of Novel Materials. Vol. 1, No. 2, (2009), pp.101 – 110. PDF

 

10)      Hossain, M.E., Ketata, C. and Islam, M.R., “A Comparative Study of Physical and Mechanical Properties of Natural and Synthetic Waxes for Developing Models for Drilling Applications”, Journal of Characterization and Development of Novel Materials. Vol. 1, No. 3, (2009), pp. 189 – 206. PDF 

 

11)      Hossain, M.E., Ketata, C., and Islam, M.R., “A Scaled Model Study of Waterjet Drilling”, Petroleum Science and Technology. Vol. 27, (2009), pp. 1261 – 1273. PDF

 

12)      Hossain, M.E., Ketata, C., Khan, M.I. and Islam, M.R., “Human Health Risks Assessment Due to Natural Gas Pipelines Explosions”, Advances in Sustainable Petroleum Engineering Science. Vol. 1, No. 2, (2009), pp. 127 – 140. PDF 

 

13)      Hossain, M.E. and Islam, M.R., “A Comprehensive Material Balance Equation with the Inclusion of Memory during Rock-Fluid Deformation”, Advances in Sustainable Petroleum Engineering Science. Vol. 1, No. 2, (2009), pp. 141 – 162. PDF

 

14)      Hossain, M.E., Liu, L. and Islam, M.R., “Inclusion of the Memory Function in Describing the Flow of Shear-Thinning Fluids in Porous Media”, International Journal of Engineering (IJE). Vol. 3, No. 5, (2009), pp. 458 – 477. PDF 

 

15)      Hossain, M.E., Mousavizadegan, S.H. and Islam, M.R., “Effects of Memory on the Complex Rock-Fluid Properties of a Reservoir Stress-Strain Model”, Petroleum Science and Technology. Vol. 27, No. 10, (2009), pp. 1109 – 1123. PDF

 

16)      Hossain, M.E., Mousavizadegan, S.H. and Islam, M.R., “Variation of Rock and Fluid Temperature during Thermal Operations in Porous Media”, Petroleum Science and Technology. Vol. 27, (2009),  pp. 597 – 611. PDF 

 

17)      Hossain, M.E., Khan, M.I., Ketata, C., and Islam, M.R., “Comparative Pathway Analysis of Paraffin Wax and Beeswax for Industrial Applications”, Journal of Characterization and Development of Novel Materials. Vol. 1, No. 4, (2009), pp. 257 – 270. PDF

 

18)      Hossain, M.E., Ketata, C., and Islam, M.R., “Experimental Study on Beeswax Using Waterjet Drilling”, Journal of Characterization and Development of Novel Materials. Vol. 1, No. 4, (2009), pp. 285 – 296. PDF 

 

19)      Hossain, M.E. and Islam, M.R., “Knowledge – Based Reservoir Simulation – a Novel Approach”, International Journal of Engineering. Vol. 3, No. 6, (2010), pp. 622 – 638.  PDF

 

20)      Hossain, M.E., Ketata, C., and Islam, M.R., “Scaled Model Experiments of Waterjet Drilling”,  Advances in Sustainable Petroleum Engineering Science. Vol. 2, No. 1, (2010), pp. 35-46. PDF 

 

21)      Hossain, M.E., Ketata, C., Khan, M.I. and Islam, M.R., “A Sustainable Drilling Technique”, Journal of Nature Science and Sustainable Technology. Vol. 4, No. 2, (2010), pp.73 – 90. PDF

 

22)      Hossain, M.E. “The Current and Future Trends of Composite Materials: An Experimental Study”, Journal of Composite Materials. Vol. 45, No. 20, September, (2011), pp. 2133 – 2144. PDF 

 

23)      Nooruddin, H.A. and Hossain, M.E., “Modified Kozeny-Carmen Correlation for Enhanced Hydraulic Flow Unit Characterization”, Journal of Petroleum Science and Engineering. Vol. 80, (2011), pp. 107 – 115. PDF

 

24)      Hossain, M.E., Ketata, C., Khan, M.I. and Islam, M.R., “A Comparative Study of Paraffin Wax and Beeswax with a View to Simulating Waterjet Drilling of Rocks”, Advances in Sustainable Petroleum Engineering Science. Vol. 2, No. 2, (2011). 227 – 237. PDF 

 

25)      Hossain, M.E. and Islam, M.R., “Development of New Scaling Criteria for a Fluid Flow Model with Memory”, Advances in Sustainable Petroleum Engineering Science. Vol. 2, No. 3, (2011), 239 – 261. PDF

 

26)      Hossain, M.E., Mousavizadegan, S.H. and Islam, M.R., “The Mystery and Uncertainty Cloud during Reservoir Simulation in Petroleum Industry”, Advances in Sustainable Petroleum Engineering Science. Vol. 2, No. 3, (2011), 283 – 300. PDF 

 

27)       Hossain, M.E., Alabdulkarim, B., Jassim, A., Al-Dhufairy, B. and Al-Ali, A., “A Porosity Dependent Model for Heterogeneous Reservoir”, Advances in Sustainable Petroleum Engineering Science. Vol. 2, No. 3, (2011), 319 – 334.  PDF

 

28)      Hossain, M.E., “Comprehensive Modeling of Complex Petroleum Phenomena with an Engineering Approach”, Journal of Porous Media. Vol. 15, No. 2, (2012), pp. 173 – 186. PDF 

 

29)      Hossain, M.E. and Abu-Khamsin, S.A., “Development of Dimensionless Numbers for Heat Transfer in Porous Media Using Memory Concept”, Journal of Porous Media. Vol. 15, No. 10, (2012), pp. 957 – 973. PDF

 

30)      Hossain, M.E. and Abu-Khamsin, S.A., “Utilization of Memory Concept to Develop Heat Transfer Dimensionless Numbers for Porous Media Undergoing Thermal Flooding with Equal Rock-Fluid Temperatures”, Journal of Porous Media. Vol. 15, No. 10, (2012), pp. 937 – 953. PDF 

 

31)      Al-Majed, A.A., Adebayo, A.R. and Hossain, M.E., “A Sustainable Approach to Control Oil Spill”, Journal of Environmental Management. Vol. 113, (2012), pp. 213 – 227. PDF