King Fahd University of Petroleum & Minerals
Chemical Engineering Department
Dr. Ibnelwaleed A. Hussein
 

 

Welcome   Education/Work    Honors & Awards   Courses    Research Projects    Graduate students

Publications    Memberships    Polymer Lab Tour    Links    Submit Questions

 

Patents/Publications

i. Patents

  1. I.A. Hussein, H.I. Al-Abdul Wahhab, M.H. Al-Mehthel & S. H. Al-Idi, J. Sleem, “Sulfur extended polymer for use in asphalt binder and road maintenance”, Patent Pending; US Patent Application# 20100256265.

  2. Mohammed Al-Mehthel, Hamad I. Al-Abdul Wahab, Ibnelwaleed A. Hussein, “Utilization of heavy oil fly ash to improve asphalt binder and asphalt concrete performance”, US Patent Office, submitted

ii. Book Chapter

  1. Ibnelwaleed A. Hussein and S.M.J Zaidi “Thermal and Mechanical Properties of Polymeric Membranes: Literature Review” in S. M. J. Zaidi and T. Matsuura eds., Polymer membranes for fuel cells, Springer, New York, 2008.

iii) Refereed Journals (Accepted/Published)

  1. Sarfraz H. Abbasi, Ibnelwaleed A. Hussein, “Shear and Extensional Rheology of C18-CNT/LDPE Nanocomposites”, ANTEC 2011, in press

  2. Muhammad J. Khan; Abdulhadi A. Al-Juhani; Anwar Ul-Hamid; Reyadh Shawabkeh; Ibnelwaleed A. Hussein, “Effect of Chemical Modification of Oil Fly Ash and compatibilization on the Rheological and Morphological Properties of Low-Density Polyethylene Composites”, J. Applied Polymer Science, in press. PDF

  3. Ibnelwaleed A. Hussein, Ayuba A. Adesina, Mohammed N. Akhtar, “Impact of UV on the Degradation of metallocene LLDPE of different Branching Characteristics”, J. Polymer Research, in press. PDF

  4. M.A. Suleiman, I.A. Hussein, M.C. Williams, “Rheological Investigation of the Miscibility of PP/LDPE Blends: Influence of Short Chain Branching of LDPE”, The Open Macromolecules Journal, in press.

  5. Sarfraz H. Abbasi, Ibnelwaleed A. Hussein, Anwar Parvez, Non-isothermal crystallization kinetics study of LDPE / MWCNT nanocomposites: Effect of Aspect ratio and surface modification, Applied Polymer Science, published online July 21, 2011. PDF

  6. Ibnelwaleed A. Hussein, SK. Asrof Ali, Mohammed A. Suleiman, Yunusa Umar, “Rheological Behavior of associating ionic polymers based on diallylammonium salts containing single-, twin-, and triple-tailed hydrophobes”, European polymer Journal,  Vol 46, No. 5, 1063-1073, 2010. PDF

  7. Yunusa Umar, Shaikh Asrof Ali, Ibnelwaleed Hussein, Basel Abu-Sharkh, “Rheological Behavior of pH Responsive Associating Ionic Polymers of Diallyammonium salts and Sulfur dioxide”, J. Applied Polymer Science, 111, 125-131, 2009.PDF

  8. M.A. Suleiman, I.A. Hussein “Implications of LDPE Branching and Mw on thermal and Mechanical Properties of PP/LDPE Blends”, Macromolecular Symposia, 263, 130-137, 2008.PDF

  9.  N.M. Tukur, B.F. Abu Sharkh, E.Y. Osei-Twum, I.A. Hussein, “Impact of Short Chain branching on Molecular order in metallocene LLDPE melts: NMR, Light Scattering and MD simulation Study”, Macromolecular Symposia, 263, 121-129, 2008.PDF

  10. Ibnelwaleed A. Hussein, "Influence of Mw on the non-isothermal Crystallization Kinetics of Zighler-Natta and Metallocene HDPE", Applied Polymer Science, 107, 2802-2809, 2008.PDF

  11. Ibnelwaleed A. Hussein, “Rheological Investigation of the influence of Molecular Structure on the Natural and accelerated weathering of LLDPE”, Polymer Degradation and Stability, 92, 2026-2032, 2007.PDF

  12. Ghaithan A. Al-Muntasheri, Hisham A. Nasr-Eldin, Ibnelwaleed A. Hussein, “Rheokinetic Study of an Organically Cross-linked Polymeric Gel Used for Water Shut-Off”, J. Petroleum Science & Engineering, 59(1-2), 73-83, 2007.PDF

  13. Ghaithan A. Al-Muntasheri, Ibnelwaleed A. Hussein, Hisham A. Nasr-Eldin, Mohamed B. Amin, “Viscoelastic Properties of a High Temperature Cross-linked Water Shut-Off Polymeric Gel”, J. Petroleum Science & Engineering, 55, 56-66, 2007. PDF

  14. Ashraful Islam, Ibnelwaleed A. Hussein, Muhammed Atiqullah, "Influence of Branch Content, Comonomer Type and Composition Distribution on non-isothermal Crystallization Kinetics of Metallocene LLDPEs", European Polymer Journal, 43, 599-610, 2007. PDF

  15. Tayyab Hameed, Ibnelwaleed A. Hussein, “Rheological, Thermal and Mechanical Characterization of Metallocene LLDPE blends with HDPE: Influence of Mw”, Polymer Journal, 38(11), 1-13, 2006. PDF

  16. Ibnelwaleed A. Hussein, Hamad I. Al-Abdul Wahhab, Mohammad H. Iqbal “Influence of Polymer Type and Structure on Polymer Modified Asphalt Concrete Mix”, Canadian Journal of Chemical Engineering, 84(4), 480-487, 2006. PDF

  17. Mohammad H. Iqbal, Ibnelwaleed A. Hussein, Hamad I. Al-Abdul Wahhab, Mohamed B. Amin, “Rheological Investigation of the Influence of Acrylate Polymers on the Modification of Asphalt”, J. Applied Polymer Science, 102(4), 3446-3456, 2006. PDF

  18. Ibnelwaleed A. Hussein, Tayyab Hameed, Michael C. Williams, “Thermorheology of Branched and linear metallocene Polyethylene”, J. Applied Polymer Science,102(2), 1717-1728, 2006. PDF

  19. Ashraful Islam, Ibnelwaleed A. Hussein, “Influence of Branch Content, Comonomer Type, and Crosshead Speed on the Mechanical Properties of metallocene LLDPEs”, J. Applied Polymer Science, 100(6),  5019-5033, 2006. PDF

  20. Ibnelwaleed A. Hussein, Mohammed H. Iqbal, Hamad I. Al-Abdul Wahhab, “Influence of Mw of LDPE and vinyl acetate content of EVA on the Rheology of Polymer Modified Asphalt”, Rheologica Acta, 45(1), 92-104, 2005. PDF

  21. Ibnelwaleed A. Hussein, M.S. Mozumder, R. Al-Naizy, B.F. Abu Sharkh, “Influence of Hydrophobe Content on the Solution Rheology of SO2, N,N-diallyl-N-carboethoxymethylammonium chloride-co-N,N-diallyl-N-octadecylammonium chloride Polymer”, European Polymer Journal, 41(10),  2472-2482, 2005. PDF

  22. Ibnelwaleed A. Hussein, Implications of melt Miscibility on Thermal and Mechanical Properties of    metallocene LLDPE Blends with HDPE: Influence of Comonomer Type, Polymer International, 54(9), 1330-1336, 2005. PDF

  23. Ibnelwaleed A. Hussein, Tayyab Hameed, “Influence of Branching Characteristics on Thermal and Mechanical Properties of Ziegler-Natta and Metallocene LLDPE blends with LDPE”, J. Applied Polymer Science, 97(6),  2488-2498, 2005 PDF

  24. Rehan A. Chaudry, Ibnelwaleed A. Hussein, Basel F. Abu Sharkh, Mohammad B. Amin, “Influence of Molecular Parameters and Processing Conditions on the Rheology of Hydrogenated Nitrile Butadiene Rubbers”, Applied Polymer Science, 97(4), 1432-1441, 2005. PDF

  25. Ibnelwaleed A. Hussein, Rehan A. Chaudhry, Basel F. Abu Sharkh, “Study of the Miscibility and Mechanical Properties of NBR/HNBR blends”, Polymer Engineering & Science 2004, 44(12), 2346-2352. PDF

  26. B.F. Abu Sharkh, R. Kahraman, S.H. Abbasi and I.A. Hussein, “Effect of Epolene E-43 as a Compatibilizer on the Mechanical Properties of Palm Fiber-Propylene Composites”, J. Applied Polymer Science, 92(4), 2581-2592, 2004. PDF

  27. Ibnelwaleed A. Hussein, Basel F. Abu-Sharkh ‘MD Simulation Study of the Influence of Branch Content on Crystallization of Branched Polyethylene Chains with Uniform Branch Distribution’, Polymer Research, 11, 161-168, 2004. PDF

  28. Ibnelwaleed A. Hussein and Michael C. Williams, “Rheological Study of Heterogeneities in Melt Blends of ZN-LLDPE and LDPE: Influence of Mw and Comonomer Type, and Implications for Miscibility", Rheologica Acta 2004,43(6)602-614. PDF

  29. Ibnelwaleed A. Hussein, “Implications of Melt Compatibility/Incompatibility on Thermal and Mechanical Properties of Metallocene and Ziegler-Natta LLDPE Blends with HDPE: Influence of Composition Distribution and Branch Content of LLDPE”, Polymer International 2004, 53(9), 1327-1335. PDF

  30. Basel F. Abu Sharkh, Adam M. Giri, Ibnelwaleed A. Hussein, “Influence of Branch Content on Melt Miscibility of HDPE and Metallocene Octene-LLDPE: MD Simulation Study”, European Polymer Journal 2004, 40(6), 1177-1182. PDF

  31. Ibnelwaleed A. Hussein and Michael C. Williams, “Rheological Study of the influence of Branch Content on the Miscibility of octene m-LLDPE and ZN-LLDPE in LDPE”, Polym. Eng. & Sci. 2004, 44, 660-672. PDF

  32. Tayyab Hameed and Ibnelwaleed A. Hussein, “Effect of short chain branching of LDPE on its miscibility with linear HDPE”, Macromolecular Materials & Engineering 2004, 289(2), 198-203. PDF

  33. Ibnelwaleed A. Hussein and Michael C. Williams, “Melt Flow Indexer Evidence of High-Temperature Transitions in Molten High-density Polyethylenes”, J. Applied Polym. Sci., 2004, 91(2), 1309-1313.    PDF

  34. Ibnelwaleed A. Hussein, Tayyab Hameed, Basel F. Abu Sharkh, Khaled Mezghani, “Miscibility of hexene-LLDPE and LDPE Blends: Rheological Study of the Influence of Branch Content and Composition Distribution”, Polymer 2003, 44(16), 4665-4672. PDF

  35. Ibnelwaleed A. Hussein, “Rheological Study of the Miscibility of butene m-LLDPE and Linear Polyethylene Blends: Influence of Branch Content and Composition Distribution”, Macromolecules 2003, 36(6), 2024-2031. Erratum: 36(12),  4667. PDF

  36. Tayyab Hameed and Ibnelwaleed A. Hussein, “Rheological Study of the influence of Mw and comonomer Type on the miscibility of m-LLDPE and LDPE, Polymer, 2002, 43(25), 6911-6929. PDF

  37. Basel F. Abu-Sharkh and Ibnelwaleed A. Hussein, “MD Simulation of the Influence of Branch Content on Collapse and Conformation of LLDPE Chains Crystallizing from highly Dilute Solutions, Polymer, 2002, 43(23), 6333-6340. PDF

  38. Ibnelwaleed A. Hussein and Michael C. Williams, "Rheological Study of the Miscibility of LLDPE/LDPE Blends and the Influence of Tmix", Polymer Engineering & Science, 41(4), 696-701,  2001. PDF

  39. Ibnelwaleed A. Hussein, Kam Ho, Shivendra K. Goyal, Elizabeth Karbashewski, Michael C. Williams, "Thermomechanical Degradation in the Preparation of Polyethylene Blends", Polymer Degradation and Stability, 68(3), 381-392, 2000. PDF

  40. Ibnelwaleed A. Hussein and Michael C. Williams, "DSC Evidence for Microstructure and Phase Transitions in Polyethylene Melts at High Temperatures", Macromolecules, 33, 520-522, 2000. PDF

  41. Ibnelwaleed A. Hussein and Michael C. Williams, ‘Anomalous Nonlinearities in Steady Shear Rheology of Polyethylene Melts’, J. Non-Newtonian Fluid Mech., 86(1-2), 105-118, 1999. PDF

  42. Ibnelwaleed A. Hussein and Michael C. Williams, ‘Rheological Evidence for High-Temperature Phase Transitions in Melts of High-Density Polyethylene’, Macromol. Rapid Commun., 19, 323-325, 1998. PDF

  43. H.K. Abdel Aal and I.A. Hussein, Parametric Study for Saline Water Electrolysis: Part I- Hydrogen Production, Int. J. Hydrogen Energy, 18(6), 485 - 489, 1993.

  44. H.K. Abdel Aal, S.M. Sultan, and I.A. Hussein, Parametric Study for Saline Water Electrolysis: Part II - Chlorine Evolution, Selectivity, and Determination, Int. J. Hydrogen Energy, 18(7), 545-551, 1993.

  45. H.K. Abdel Aal and I.A. Hussein, Parametric Study for Saline Water Electrolysis: Part III - Precipitate Formation and Recovery of Magnesium Salts, Int. J. Hydrogen Energy, 18(7), 553 - 556, 1993.

  iv) Invited Presentations

  1. Ibnelwaleed A. Hussein, “Sudan Petroleum Research Institute: Why and How?”,  Minsitry of Energy & Mining, Sudan. Nov 2009

  2. Ibnelwaleed A. Hussein, key note speaker, Rheology of Gelling Polymers Used in  Water Shut-Off Treatments, Global Produced Water Management, Interactive Technology Workshop, Luxor, Egypt, December 1-4, 2008.                                      

  3. Ibnelwaleed A. Hussein, Invited Lecture, "Fundamentals of Polymer Technology", Jubail Industrial College, May 2003.

  4. Ibnelwaleed A. Hussein and Michael C. Williams, "Influence of Tmix on Rheology and Miscibility of Polyethylene Blends", Award Presentation, Proceedings of Polyblends '99, Boucherville, Quebec, October 13-15, 1999.

v) Refereed Conference Presentations

  1. Msalli Al-Otaibi, Ghaithan Al-Muntasheri, I.A. Hussein, “Laboratory Evaluation of Viscoelastic Surfactant Acid Diversion for Carbonate Reservoirs-Core Flooding Experiments” 17th SPE Middle East Oil & Gas Show and Conference (MEOS), 20-23 March 2011 in Manama, Bahrain, accepted.

  2. Ibnelwaleed A. Hussein, Joao BP Soares, Mohammed A. Suleiman, “Thermal, Mechanical and Rheological Properties of homo HDPE synthesized at Different Polymerization Conditions”, 26th Polymer Processing Society Meeting, Banff, July 4-8, Canada.

  3. Adesina A. Ayuba, Abdulhadi Al-Juhani, Ibnelwaleed A. Hussein, "Enhancing the processability of high density polyethylene using different nanoclays", 26th Polymer Processing Society Meeting, Banff, July 4-8, Canada.

  4.  Sarfraz H. Abbasi, Muataz Ali Atieh, Abdulhadi A. Al-Juhani, Ibnelwaleed A. Hussein, “Thermal and Mechanical Properties of LDPE/CNT Nanocomposites: Impact of aspect ratio and surface modification”, 26th Polymer Processing Society Meeting, Banff, July 4-8, Canada.

  5. Msalli Al-Otaibi, Ghaithan Al-Muntasheri, I.A. Hussein, “Laboratory Evaluation of Viscoelastic Surfactant Acid Diversion for Carbonate Reservoirs-Rheology of VES". Well Stimulation & Enhanced Oil Recovery, Dalian, China, April 12-15, 2010.

  6. I.A. Hussein, A.A. Al-Juhani, S.H. Abbasi, Impact of surface modification of carbon nanotubes on the rheology of polyethylene nanocomposites, Accepted for presentation at  the 25th Polymer Processing Society Meeting, March 200 8, Goa, India.

  7. Ibnelwaleed A. Hussein, Mohammad Ashraful Islam, Alim Rizvi, Mohammed N. Akhtar, UV Degradation of metallocene LLDPE of different short Chain Branching, Accepted for poster presentation at  the 25th Polymer Processing Society Meeting, March 200 8, Goa, India.

  8. S. M. Javaid Zaidi, I.A. Hussein, Selection and Characterization of Composite Polymeric Materials for PEM Fuel Cell Applications, Accepted for oral presentation at  the 25th Polymer Processing Society Meeting, March 200 8, Goa, India.

  9. Ibnelwaleed A. Hussein; Mohammad A. Parvez; Joao BP Soares, “Fourier Transform Rheology of metallocene LLDPE with controlled long Chain Branching”, XVth International Congress on Rheology, Monterey, California, August 2008.

  10. N.M. Tukur, B.F. Abu Sharkh, E.Y. Osei-Twum, I.A. Hussein, “Impact of Short Chain branching on Molecular order in metallocene LLDPE melts: NMR, Light Scattering and MD simulation Study”, EUROPOLYMER 2007 Conference, Gargnano, Italy, May 27-June 1, 2007.

  11. M.A. Suleiman, I.A. Hussein, A. Meddad, B.F. Abu Sharkh,Influence of Tacticity on the Melt Miscibility of PP/LDPE Blends”, EUROPOLYMER 2007 Conference, Gargnano, Italy, May 27-June 1, 2007.

  12. M.A. Kareem, B.F. Abu Sharkh, I.A. Hussein, Influence of Tacticity on the Melt Miscibility of PP/LDPE Blends: MD Simulation Study”, EUROPOLYMER 2007 Conference, Gargnano, Italy, May 27-June 1, 2007.

  13. S.M.J. Zaidi, A.S. Sultan and I.A. Hussein, “Rheological Properties of Aqueous Solutions of Sulfonated Poly(ether ether ketone), Polyetherimide and Polysulfone”, to be presented at the EUROPOLYMER 2007 Conference, Gargnano, Italy, May 27-June 1, 2007.

  14. M.A. Suleiman, I.A. Hussein, Influence of short chain branching on the Miscibility of PP/LDPE Blends”, to be presented at the EUROPOLYMER 2007 Conference, Italy, May 27-June 1, 2007.

  15. Md. Ashraful Islam, Ibnelwaleed A. Hussein, Halim H. Redhwi, Alim Rizvi, ‘Influence of branch content on the degradation of metallocene LLDPE in natural weathering”,  Chemistry in Industry 2007, Bahrain.

  16. Ibnelwaleed A. Hussein, “Rheological Investigation of the influence of Branch Content on the UV Degradation of metallocene LLDPE”, Proceedings of the 22nd Annual conference of the Polymer Processing Society, Yamagata, Japan, July 2-6, 2006.

  17. Ashraful Islam, Ibnelwaleed A. Hussein, "Influence of Branch Content, Comonomer Type and Composition Distribution on non-isothermal Crystallization Kinetics of Metallocene LLDPEs", Presented at the 21st Polymer Processing Society Meeting, June 2005, Germany.

  18. Ibnelwaleed A. Hussein, Hamad I. Al-Abdul Wahhab, Mohammad H. Iqbal, Isam A. Mohammod, “Influence of Polymer Type and Structure on Polymer Modified Asphalt Concrete Mix”, Presented at the 21st Polymer Processing Society Meeting, June 2005, Germany.

  19. Mohammad H. Iqbal, Ibnelwaleed A. Hussein, Hamad I. Al-Abdul Wahhab, Mohamed B. Amin, “Rheological Investigation of the Influence of Acrylate Polymers on the Modification of Asphalt”, Presented at the 21st Polymer Processing Society Meeting, June 2005, Germany.

  20. Ghaithan A. Al-Muntasheri, Ibnelwaleed A. Hussein, Hisham A. Nasr-El-Din, Mohamed B. Amin, “Viscoelastic Properties of an Organically x-linked Water Shutoff Polymeric Gel”, Presented at Kuwait Oil and Gas Conference and Exhibition 2005, March 7-9, 2005.

  21. Tayyab Hameed, Ibnelwaleed A. Hussein, Compatibilized m-LLDPE/LDPE Blends, Proceedings of the 6th International Conference and Exhibition on Chemistry in Industry, Bahrain, Sept. 27-29, 2004.

  22. Ibnelwaleed A. Hussein, Implications of melt Miscibility on Thermal and Mechanical Properties of    metallocene LLDPE Blends with HDPE: Influence of Comonomer Type,  presented at the 20th Meeting of the Polymer Processing Society, Akron, OH, June 20-24, 2004.

  23. Rehan A. Chaudry, Ibnelwaleed A. Hussein, Basel F. Abu Sharkh, “Influence of Molecular Parameters and Processing Conditions on the Rheology of Hydrogenated Nitrile Butadiene Rubbers”, presented at the 20th Meeting of the Polymer Processing Society, Akron, OH, June 20-24, 2004.

  24. Ibnelwaleed A. Hussein, Rehan A. Chaudhry, Basel F. Abu Sharkh, “Study of the Miscibility and Mechanical Properties of NBR/HNBR blends”, presented at the 20th Meeting of the Polymer Processing Society, Akron, OH, June 20-24, 2004.

  25. Adam M. Giri, Basel F. Abu Sharkh, Ibnelwaleed A. Hussein, Molecular Dynamics Simulation of the influence of branch content on the miscibility of HDPE in metallocene octene-LLDPE”, 6th Saudi Engineering Conference, Dhahran, Nov. 2002. 

  26. Tayyab Hameed, Basel F. Abu Sharkh, Ibnelwaleed A. Hussein, Molecular Dynamics Simulation of the influence of branch content on the miscibility of LDPE in metallocene octene-LLDPE”, 6th Saudi Engineering Conference, Dhahran, Nov. 2002

  27. Ibnelwaleed A. Hussein and Michael C. Williams, “Rheological Study of the influence of Branch Content on the Miscibility of octene m-LLDPE/LDPE and ZN-LLDPE/LDPE Blends”, 18th Polymer Processing Society meeting, Portugal, June 18-22, 2002.

  28. Ibnelwaleed A. Hussein and Michael C. Williams, “Rheological Study of the   Miscibility of octene m-LLDPE and LDPE Blends: Influence of Mw and MWD, Polymer Processing Society, Anatalia, Turkey, October 22-24, 2001.

  29. Ibnelwaleed A. Hussein and Michael C. Williams, “Rheological Study of the   Miscibility of octene m-LLDPE and LDPE Blends: Influence of some molecular parameters, 3rd Pacific Rim Conference on Rheology, Vancouver, Canada, July 8-13, 2001.

  30. Ibnelwaleed A. Hussein and Michael C. Williams, Melt-Indexer Evidence of High Temperature Transitions in Molten High-Density Polyethylenes, 3rd Pacific Rim Conference on Rheology, Vancouver, Canada, July 8-13, 2001.

  31. Basel F. Abu-Sharkh, Nasir M. Tukur, Ibnelwaleed A. Hussein, Investigation of Structure-Conformation Relationships in molten m-Polyethylenes by Molecular Simulation Techniques, 3rd Pacific Rim Conference on Rheology, Vancouver, Canada, July 8-13, 2001.

  32. Ibnelwaleed A. Hussein and Michael C. Williams, "Effect of Molecular Parameters and Temperature on the Miscibility of Polyethylene Blends, presented at the 71th Annual meeting of the Society of Rheology, Madison, Wisconsin, Oct. 17-21, 1999

  33. Ibnelwaleed A. Hussein and Michael C. Williams, "Thermomechanical Degradation in the Preparation of Polyethylene Blends", 71th Annual meeting of the Society of Rheology, Madison, Wisconsin, Oct. 17-21, 1999.

  34. Ibnelwaleed A. Hussein and Michael C. Williams, ‘Temperature Dependence of Complex Viscosity in HDPE melts and Evidence of Microstructural Transitions’, presented at the EURORHEO99 Conference, Sophia-Antipolis (Nice), France, May 3-7, 1999.

  35. Ibnelwaleed A. Hussein and Michael C. Williams, ‘Evidence of Liquid Crystalline Rheology in Melts of Polyethylene’, presented at the 70th Annual meeting of the Society of Rheology, Monterey, California, Oct. 4-8, 1998

  36. Ibnelwaleed A. Hussein and Michael C. Williams, ‘Anomalous Nonlinearities in Polyethylene Melts’, ‘Mechanics of Nonlinear Materials’ Conference, Banff, Alberta, May 13-16, 1998.

  37. Ibnelwaleed A. Hussein and Michael C. Williams, ‘Rheology of Immiscible polyethylenes’, 69th Annual Meeting of the Society of Rheology, Columbus, Ohio, USA, October 19-23, 1997.

  38. I.A. Hussein, Z. Fan, P. Choi and M.C. Williams, ‘Phase Behavior of LDPE/LLDPE Blends Prepared at Optimum Blending Conditions’, 47th Canadian Chemical Engineering Conference, Edmonton, AB, Canada, October 5-8, 1997.

  39. M. Mohammad, I.A. Hussein and M.C. Williams, ‘Measuring Density-Temperature Behavior of Polymer Solids and Melts: Comparison of DSC and Densitometer Results for Polyethylenes’, 47th Canadian Chemical Engineering Conference, Edmonton, AB, Canada, October 1997.

  40. Z. Fan, I.A. Hussein, P. Choi and M.C. Williams, ‘D.S.C. Study of the Miscibility of LDPE/LLDPE Blends’, 47th Canadian Chemical engineering Conference, Edmonton, AB, Canada, October 1997.

     

    vi) Non-Refereed Conference Presentations  

  41. H.K. Abdel Aal and I.A. Hussein, The Precipitation of Mg and Ca Hydroxides in Sea Water Electrolysis, Proceedings of the 10th Hydrogen Energy Conference, Florida, 1994.

  42. H.K. Abdel Aal and I.A. Hussein, Electrolysis of Saline Water under Simulated Conditions of P.V. Solar Cell, Proceedings of the 9th Hydrogen Energy Conference, Paris, 1992.

 
Copyright 2011 Chemical Engineering Department, King Fahd University of Petroleum & Minerals, Dhahran, Saudi Arabia