PUBLICATIONS

 

 

Total publications 147:  (books 3, journal 74, proceedings 55, book chapters 5, and periodicals 10). Contributed/participated in writing more than 50 research project reports and proposals.

 

Books and Book Chapters

 A.  Books (3)

1.    Handbook of Polymer Degradation, SH Hamid, MB Amin and AG Maadhah, Editors, Marcel Dekker, New York, 1992.

2.    Handbook of Polymer Degradation, Revised and Expanded Second Edition, SH Hamid, Editor, Marcel Dekker, New York, August, 2000.

3.    Handbook of MTBE, H.H. Redhwi and M. A. Ali, Editors, Marcel Dekker, New York, 2004




  B.  Book Chapters (5)

  1. SH Hamid, "Weather-induced degradation of plastics in near-equatorial regions," In: Polymer Science Contemporary Themes (Vol. II), (S Sivaram, ed.), Tata McGraw-Hill Publishing Co., New Delhi, 1991.
  2. SH Hamid, AG Maadhah, and MB Amin, "Weathering degradation of polyethylene," In: Handbook of Polymer Degradation (SH Hamid, MB Amin and AG Maadhah, eds.), Marcel Dekker, New York, 1992.
  3. SH Hamid, “Plastic Lifetime: Boon or Bane,” In: Thermoplastics Beyond The Year 2000: A Paradigm, (O Olabisi and AG Maadhah, eds.), KFUPM Press, Dhahran, Saudi Arabia, 143-150, 1996.
  4. SH Hamid and I Hussain,  "Polymer Degradation and Stabilization Under Harsh Climatic Conditions." In: Handbook of Polymer Degradation (SH Hamid, ed.), Marcel Dekker, New York, pp 699-726, 2000.
  5. I Hussain and S.H. Hamid, “Plastic in Agriculture”. In: Plastics and the Environment (A.L. Andrady, ed.), John Wiley Publication, pp. 185-209, 2003



Journals
(74)

  1. SH Hamid, AG Maadhah and AM Usmani, "Bagasse-based building materials," Polymer Plastics Technology and Engineering, 21, 2, 138-149, 1983.
  2. SH Hamid and AM Usmani, "Applications of polymers in LED devices," Polymer-Plastic Technology and Engineering, 22, 2, 160-280, 1984.
  3. AG. Maadhah, SH Hamid, and MB Amin, Overview of the petrochemical industry in Saudi Arabia," Arabian Journal for Science and Engineering, 10, 4, 1-30, 1985.
  4. SH Hamid, AG Maadhah, FS Qureshi, and MB Amin, Weather-induced degradation of polyethylene: infrared spectroscopic studies," Arabian Journal for Science and Engineering, 13, 4, 503-531, 1988.
  5. SH Hamid and WH Prichard, "Application of Infrared spectroscopy in polymer degradation," Polymer-Plastics Technology and Engineering, 27, 303-334, 1988. (From Ph. D. Work)
  6. FS Qureshi, SH Hamid, AG Maadhah, and MB Amin, Weather-induced degradation of plastic pipes," Polymer Plastics Technology and Engineering, 28 (7&8), 663-670, 1989.
  7. FS Qureshi, SH Hamid, AG Maadhah, and MB Amin, "Role of degradable plastic packaging materials in tropical climate," Progress in Rubber and Plastic Technology, 5, 1, 1-14, 1989.
  8. SH Hamid, FS Qureshi, MB Amin, and AG Maadhah, "Weather-induced degradation of LLDPE: Calorimetric analysis," Polymer-Plastic Technology and Engineering, 28(5&6), 475-492, 1989
  9. FS Qureshi, MB Amin, AG Maadhah and SH Hamid, Weather-induced degradation of Linear Low Density Polyethylene: Mechanical Properties," Polymer Plastic Technology and Engineering, 28(7&8), 649-662, 1989.
  10. SH Hamid and WH Prichard, "Mathematical modeling of weather-induced degradation of polymer properties," Journal of Applied Polymer Science, 43, 651-678, 1991.
  11. SH Hamid, MB Amin, AG Maadhah and AM Al-Jarallah, "Polymer lifetime studies in hostile environment," Journal of Vinyl Technology, 14(4), 182-186, 1992.
  12. SH Hamid and MB Amin, "Lifetime prediction of polymers," Journal of Applied Polymer Science, vol. 55, 1385-1394, 1995.
  13. SH Hamid and M Atiqullah, "Role of blending technology in polyethylene recycling," Journal of Macromolecular Sciences—Reviews in Macromolecular Chemistry and Physics, C35 (3), 495-515, 1995.
  14. JH Khan and SH Hamid, "Durability of HALS stabilized film in greenhouse environment," Polymer Degradation and Stability, 48, 137-142, 1995.
  15. SH Hamid and MA Ali, "Effect of MTBE Blending on the Properties of Gasoline," Fuel Science & Technology International, 13(5), 509-606, 1995.
  16. MB Amin, SH Hamid, and F Rahman, "Prediction of mechanical properties of weather-induced degraded plastics in Saudi Arabia," Journal of Applied Polymer Science, 56, 279-284, 1995.
  17. I Hussain, SH Hamid, and J. H. Khan, "Polyvinyl chloride pipe degradation studies in natural environment," Journal of Vinyl & Additive Technology, September 1995.
  18. MB Amin, SH Hamid, and JH Khan, "Photo-oxidative degradation of polyethylene greenhouse film in harsh environment," Journal of Polymer Engineering, 14(4), 253-267, 1995.
  19. SH Hamid and MA Ali, "A comparative study of solvent for the extraction of aromatics for naphtha," Energy Sources, 18(1), 65-84, 1996.
  20. F Rahman, SH Hamid, and MA Ali, "Effect of lower feedstock prices on economics of MTBE Complex," Energy Sources, 18(1), 57-64, 1996.
  21. HB Olayan, SH Hamid, and ED Owen, "Photochemical and thermal cross-linking of polymers," Journal of Macromolecular Science—Reviews in Macromolecular Chemistry and Physics, C36(4), 671-719, 1996.
  22. MM Al-Najjar, SH Hamid, and EZ Hamad, “The Glass Transition Temperature of Nitrated Polystyrene/Poly(Acrylic Acid) Blends,” Polymer Engineering and Science, Vol. 36, No. 16, 2083-2087, 1996.
  23. AM Aitani and SH Hamid, "Benzene Reduction in Reformat: A Review of Current Catalytic Studies," The Arabian Journal of Science and Engineering, 21(2), Theme Issue on Catalysis in Petroleum Refining, 181-192, 1996.
  24. AKK Lee, AM Aitani, and SH Hamid, “Economic Evaluation of the Gasification of Refinery Residues for the Co-production of Hydrogen, Electricity, and Syngas,” Arabian Journal for Science and Technology, 21, 4B, 693-706, 1996.
  25. KA Khan, R Kahraman, EZ Hamad, SA Ali, and SH Hamid, “Studies on a Terephthalic Acid and Dihydroxydiphenyl Sulfolane Liquid Crystalline Copolymer and its Composites with different Thermoplastics,” Journal of Applied Polymer Science, 21, 645-652, 1997.
  26. ASH Salem and SH Hamid, "Removal of Sulfur Compounds from Naphtha Solution Using Solid Adsorbents," Chemical and Engineering Technology, 20, 342-347, 1997.
  27. E. Hayashi, E. Iwamatsu, M.E. Biswas, S.A. Ali, Y. Yamamoto, Y. Sanada, A.K.K. Lee, H. Hamid, and T. Yoneda, “High Surface Area Smectite Supported Cobalt Oxides as Active Catalysts for Thiophene Hydrodesulfurization”, Chemistry Letters, 5, 433-434, 1997
  28. E Hayashi, E Iwamatsu, Y Sanada, MA Ali, SH Hamid, DS Webster, and T Yoneda, “Proton Magnetic Resonance Thermal Analysis of Petroleum Derived Asphaltene,” Journal of The Japan Petroleum Institute, 41,(2), 117-124, 1998.
  29. E Hayashi, E Iwamatsu, S Ahmad, A Lee, SH Hamid, “Characterization of CoMo-Al2O3 Catalyst by a Combination Technique of TPS and ESR,” Journal of The Japan Petroleum Institute, 41(3), 222-226, 1998.
  30. JH Khan and SH Hamid, “Natural and Controlled Photo Aging of LDPE: Changes in Structural, Molecular and Surface Characteristics,” Journal of Materials, 15, 177-184, 1998.
  31. M Atiqullah, H Hammawa, and SH Hamid, “Modelling The Solubility of Ethylene and Propylene in a Typical Polymerization Diluent: Some Selected Situations,” European Polymer Journal, 34(10), 1511-1520, 1998.
  32. M Atiqullah, H Hammawa, M Akhtar, J Khan, SH Hamid, “Nonisothermal, Uncontrolled Homo- and Copolymerization of Ethylene Using Selected Zirconocene,” Journal of Applied Polymer Science, Vol. 70, 137-147, 1998.
  33. A.L. Andrady, S. H. Hamid, X. Hu, and A. Torikai, “Effects of Increased Solar Ultraviolet Radiation on Materials”, Journal of Photochemistry and photobiology B-Biology, 46 (1-3) 96-103, Oct. 1998
  34. R Kahraman, KA Khan, SA Ali, SH Hamid, and AZ Sahin, “A Study of the Effect of Polystyrene Sulfonation on the Performance of Terephthaloyl Chloride-Dihydroxydi­phenyl Sulfone Copolymer/Polystyrene System,” Journal of Material Engineering and Performance, 7(5), December 1998.
  35. E Iwamatsu, E Hayashi, Y Sanada, S Ahmed, S Ali, A Lee, SH Hamid, and T Yoneda, “Temperature-Programmed Desorption and Reduction of Sulfided Alumina-Pillared Montmorillonite,” Applied Catalysis A: General, 179, 139-144, 1999.
  36. E Hiyashi, E Iwamatsu, ME Biswas, Y Sanada, S Ahmad, SH Hamid, and T Yoneda, “Characterization of High Surface Area Smectite Supported Cobalt Oxides Catalysts for Hydrodesulfurization by Means of TPR, TPS, and ESR,” Applied Catalysis A: General, 179, 203-216, 1999.
  37. S Ahmed, SA Ali, K Alam, SH Hamid, E Iwamatsu, E Hayashi, Y Sanada, and T Yoneda, "Characterization of Commercial Hydrocracking Catalysts by Temperature- Programmed Methods: TPR/TPS/TPD," The Arabian Journal for Science and Engineering, 24, 1c, 71-82, 1999.
  38. N Ahmed, JH Khan, I Hussain, and SH Hamid, "Thermal, Chemical, and Mechanical Properties Evaluation of Recycled-Reprocessed High Density Polyethylene," Journal of Polymer Material, 16, 341-345, 1999.
  1. SH Hamid, “Development of High-Performance Heavy Oil Hydrocracking Catalysts: Characterization of Atmospheric Residue Feed,” Petroleum Science and Technology, 18 (7 & 8), 871-888, 2000
  2. SH Hamid, “UV-Induced Degradation of Ziegler-Natta and Metallocene Catalyzed Polyethylene,” Journal of Applied Polymer Science, 78, 1591-1596, 2000
  3. SH Hamid, “Impact of Unleaded Gasoline in Reducing Emission in Saudi Arabia,Energy Sources, 23, 37-44, 2001
  4. A.Hasan, S. Ahmed, M.A. Ali, S.H.Hamid, and T. Inui, “A comparison Between b - and USY – Zeolite – based Hydrocracking Catalysts”, Applied Catalysis A: General, 6784, 1-10, 2001
  5. I. Hussain and H.H. Redhwi, “Development of Polypropylene-based Ultraviolet-Stabilized formulations for Harsh Environment”, Journal of Material Engineering and Performance, 11 (3), 317-321, 2002
  6. M. A. Ali, T. Kimura, Y. Suzuki, M. A. Al-Saleh, H. Hamid, and T. Inui, “Hydrogen Spillover Phenomenon in Noble Metal Modified Clay-Based Hydrocracking Catalysts”, Applied Catalysis A: General 277 63-72, 2002
  7. E. Iwamatsu, E. Hayashi, Y. Sanada, M. A. Ali, S. Ahmed, H. Hamid, R. Sakurovs and T. Yoneda, "Proton Magnetic Resonance Thermal Analysis of Petroleum Derived Asphaltenes with Co Smectite and CoMo Alumina Based Catalysts", Journal of The Japan Petroleum Institute, vol. 45, No. 3, 135-143,2002.
  8. A. Andrady, H. Hamid, and A. Torikai, “Effects of Climate and UV-B on Materials”, Photochemical, Photobiology Science, 2, 68-72, 2003
  9. S. Ahmed, S. A. Ali, H. Hamid, and K. Honna, “Preparation, Characterization, and Catalytic Evaluation of First Stage Hydrocracking Catalyst, Studies in Surface Science and Catalysis, Vol. 145, 295-298, 2003
  10. B. F. Abu-Sharkh and H. Hamid, “Degradation Study of Date Palm Fibre/Polypropylene Composites in Natural and Artificial Weathering: Mechanical and Thermal Analysis”, Polymer degradation and Stability, 85 (3), 967-973, Sept. 2004
  11. F. Rahman, M.N. Siddiqui, H. H. Redhwi, and M.F. Ali, “Catalytic Processing of Waste Plastics With/Without Petroleum Resid – An Economic Evaluation”, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 28 (15), 1353-1363, Nov. 2006
  12. S. M. J. Zaidi, S. U. Rahman, and H. H. Redhwi, “R&D Activities of Fuel Cell Research at KFUPM”, Desalination, 209, 319-327, 2007
  1. A. Andrady, H. Hamid and A. Torikai, “Effects of Stratospheric Ozone Depletion and Climate Change on Materials Damage”, Photochemical Photobiological Science, 6, 311-318, 2007
  2. A. Maadhah, Y. Fujiyama, H. Redhwi, M. Abul-Hamayel, A. Aitani, M. Saeed, and C. Dean, “A New Catalytic Cracking Process To maximize Refinery Propylene”, The Arabian Journal for Science and Engineering, 33 (1B0, 17-28, April 2008
  3. M Siddiqui, M. Gondal, and H. Redhwi, “Identification of Different Type of Polymers in Plastic Waste”, Journal of Environmental Science & Health, Part A: Environmental Science & Engineering & Toxic Hazards, 43 (11): 1303-1310, Sep. 2008
  4. M. Siddiqui and H. Redhwi, “Pyrolysis of Mixed Plastics for the Recovery of Useful Products”, Fuel Processing Technology, 90, 545-552, 2009
  5. Andrady A, Aucamp PJ, Bais AF, Ballaré CL, Björn LO, Bornman JF, Caldwell M, Cullen AP, Erickson DJ, deGruijl FR, Häder DP, Ilyas M, Kulandaivelu G, Kumar HD, Longstreth J, McKenzie RL, Norval M, Paul N, Redhwi HH, Smith RC, Solomon KR, Sulzberger B, Takizawa Y, Tang X, Teramura AH, Torikai A, van der Leun JC, Wilson SR, Worrest RC, Zepp RG., Environmental effects of ozone depletion and its interactions with climate change: progress report, 2008”, Photochemical Photobiological Science, 8(1), 13-22, 2009
  6. Siddiqui, M. N. and Redhwi, H. H.: “Catalytic Coprocessing of Waste Plastics and Petroleum Residue into Liquid Fuel Oils”, Journal of Analytical and Applied Pyrolysis, September 2009, 86 (1) pp. 141-147
  7. Andrady A, Aucamp PJ, Bais AF, Ballaré CL, Björn LO, Bornman JF, Caldwell M, Cullen AP, Erickson DJ, deGruijl FR, Häder DP, Ilyas M, Kulandaivelu G, Kumar HD, Longstreth J, McKenzie RL, Norval M, Paul N, Redhwi HH, Smith RC, Solomon KR, Sulzberger B, Takizawa Y, Tang X, Teramura AH, Torikai A, van der Leun JC, Wilson SR, Worrest RC, Zepp RG., Environmental effects of ozone depletion and its interactions with climate change: progress report, 2009”, Photochemical Photobiological Science, 91(3), 275-294, 2010
  8. M. Siddiqui, D. Achilias, H. Redhwi, D. Bikiaris, KA Katsogiannis, and G. Karayannidis, “Hydrolytic Depolymerization of PET in a Microwave Reactor”, Macromolecular Material and Engineering, 295, 575-584, 2010
  9. D. Achilias, H. Redhwi, M. Siddiqui, A. Nikolaidis, D. Bikiaris, and G. Karauannidis, “Glycolytic Depolymerization of PET Waste in a Microwave Reactor”, Journal of Applied Polymer Science, Vol. 118, 3066-3073, 2010
  10. Y. Fujiyama, M. H. Al-Tayyar, C. F. Dean, A. Aitani, H.H. Redhwi, T. Tsutsui, K. Mizuta, “Development of High Severity FCC Process for Maximizing Propylene Production- Catalyst Development and Optimization of Reaction Conditions.”, Journal of the Japan Petroleum Institute, Vol. 53 (6), 336-341, 2010
  11. Andrady AL, Aucamp PJ, Austin AT, Bais AF, Ballaré CL, Björn LO, Bornman JF, Caldwell M, Cullen AP, Erickson DJ, de Gruijl FR, Häder DP, He W, Ilyas M, Longstreth J, Lucas R, McKenzie RL, Madronich S, Norval M, Paul ND, Redhwi HH, Robinson S, Shao M, Solomon KR, Sulzberger B, Takizawa Y, Tang X, Torikai A, van der Leun JC, Williamson CE, Wilson SR, Worrest RC, Zepp RG, “Environmental effects of ozone depletion and its interactions with climate change: progress report, 2011”, Photochemical Photobiological Science, 11(1), 13-27, 2011
  12. Andrady, A. L. Hamid, H, and Torikai, A., “Effect of solar UV and climate change on materials”, Photochemical and photobiological Sciences, Vol. 10 (2), 292-300, 2011
  13. Siddiqui, M. N.; Redhwi, H. H.; Achilias, D. S.: “Recycling of poly(ethylene terephthalate) waste through methanolic pyrolysis in a microwave reactor”, Journal of Analytical and Applied Pyrolysis, November 2012, Vol. 98, 214–220
  14. Siddiqui, M. N.; Redhwi, H. H.; Gkinis, K. and Achilias, D. S.: “Synthesis and characterization of novel nanocomposite materials based on poly(styrene-cobutyl methacrylate) copolymers and organomodified clay”, European Polymer Journal, February 2013, 49(2), 353-365
  15. HH Redhwi, MN Siddiqui, AL Andrady, and S Hussain, “Durability of LDPE Nanocomposites with Clay, Silica, and Zinc Oxide—Part I: Mechanical Properties of the Nanocomposite Materials”, Journal of Nanomaterials, Volume 2013, 1-6, 2013
  16. H.H. Redhwi, M. N. Siddiqui, A. L. Andrady, S. Hussain, “Durability of LDPE Nanocomposites With Clay, Silica, and Zinc Oxide II. Weatherability of the Nanocomposites, POLYMER COMPOSITES, 30 July, 2013
  17. Siddiqui, M. N.; Redhwi, H. H.; Charitopoulou, D. and Achilias, D. S.: “Effect of organomodified clay on the reaction kinetics, properties and thermal degradation of nanocomposites based on poly(styrene-co-ethyl methacrylate)”, Polymer International, Accepted manuscript Online: July 23, 2013. DOI: 10.1002/pi.4590
  18. Lambert, N, Ogasawara, I. Abba, I., Redhwi, H, Santner, C: “HS-FCC for propylene: concept to commercial operation”, Petroleum Technology Quarterly, Q1, 39-45, 2014
  19. Siddiqui. M, Redhwi. H, Verros. G, Achilias. D, “Evaluating the role of nano-montmorillonite in bulk in-situ radical polymerization kinetics through a simulationmodel. Homo-polymerization above the glass transition temperature: the butyl methacrylate case, Industrial & Engineering Chemistry Research, Vol 53(28), 11303-11311, 2014      
  20.  Redhwi, H. H; Siddiqui, M. N.; Andrady, A. L. and Hussain, S. "Accelerated Weatherability of the Low-Density Polyethylene Nanocomposites with Silica, Clay, and Zinc Oxide" Journal of Nanomaterials, Volume 2014, Article ID 516406, 5 pages October 2014
  21. Andrady, A. L., Torikai, A, Redhwi, H. H, Pandey, K. K., and Gies, P., “Consequences of stratospheric ozone depletion and climate change on the use of materials”, PHOTOCHEMICAL & PHOTOBIOLOGICAL SCIENCES, Volume: 14, Issue: 1 , Pages: 170-184, 2015  
  22. Redhwi, H. H; Siddiqui, M. N.; Andrady, A. L., Younus, M. and Hussain, S. " Weatherability of Conventional and Nanocomposites of LDPE and Zinc Oxide" POLYMER COMPOSITES, 2015,  DOI 10.1002/pc  
  23. Siddiqui, M. N.; Redhwi, H. H; Al-Saadi, A. A.; Rajeh, M. and Saleh, T. A.:  “Kinetic and Computational Evaluation of Activated Carbon Produced from Rubber Tires toward the Adsorption of Nickel”, Desalination and Water Treatment, doi: 10.1080/19443994.2015.1086894, August 2015
  24.  Siddiqui M. N, Rdhwi, H.H, E. Vakalopoulou, I. Tsagkalias, M. D. Ioannidou, D. S. Achilias “Synthesis, characterization and reaction kinetics of PMMA/silver nanocomposites prepared via in situ radical polymerization”, European Polymer Journal, 72 (2015) 256–269
Conference Proceedings (49)
  1. FS Qureshi, SH Hamid, AG Maadhah, and MB Amin, "Degradation of plastic pipes in a tropical climate," Proc. Conference on Plastic Pipes VII, The University of Bath, U.K., 45/1-45/8, 20-22 September 1988.
  2. AG Maadhah and SH Hamid, "Studies on polymer degradation and stabilization," Proc. Chemistry for Development, Proc. Third National Meeting of Chemists, KFUPM, 451-463, 12-14 March 1989.
  3. SH Hamid, "Stratospheric ozone depletion and polymer degradation," (Invited Speaker), Proc. Twelfth Annual International Conference on Advances in the Stabilization and Controlled Degradation of Polymers, Luzern, Switzerland, 131-142, May 21-23, 1990.
  4. SH Hamid, MB Amin, AG Maadhah, and JH Khan, "Weathering degradation of greenhouse plastic films," Proc. First Saudi Symposium on Energy, Utilization and Conservation, King Abdulaziz University, Jeddah, S. Arabia, 747-752, March 1990.
  5. SH Hamid, MB Amin, JH Khan, AG Maadhah, and AM Al-Jarallah, "Lifetime of agricultural plastics in harsh climate," Proc. American Chemical Society Division of Polymeric Material: Science and Engineering, Vol. 64, Atlanta, Georgia, 165-166, Spring Meeting, 1991.
  6. SH Hamid, AG Maadhah, AM Al-Jarallah, MB Amin and JH Khan, "Degradable plastics and its useful lifetime," Proc. of the Society of Plastic Engineers, ANTEC Meeting, 2176 - 2169, Spring 1991, Montreal, Canada.
  7. SH Hamid, MB Amin, AG Maadhah and AM Al-Jarallah, "Polymer lifetime studies in hostile environment," Proc. Division of Polymeric Materials: Science and Engineering (PMSE), American Chemical Society, Fall Meeting, Washington, DC, 399-400, August 23-28, 1992.
  8. MB Amin, SH Hamid, AG Maadhah and AM Al-Jarallah, "Studies on photooxidation of LLDPE and HDPE blends," Proc. Division of Polymeric Materials: Science and Engineering (PMSE), American Chemical Society, Fall Meeting, Washington, DC, 397-398, August 1992.
  9. SH Hamid, MB Amin, JH Khan, and AG Maadhah," Photosensitizing effects of pollutants on polymer lifetime," Proc. Symposium on Industrial Air Pollution, King Saud University, Riyadh, 417-424, 14-16 November 1992.
  10. I Hussain, JH Khan and SH Hamid, "Lifetime Study of Disposable Plastic Bag Exposed in the Harsh Climate of Near Equatorial Region," Proc. The Fourth Saudi Engineering Conference, Jeddah, 437 - 442, 5-8 November 1995.
  11. M Atiqullah, SH Hamid, and AG Maadhah, "The Role of Polymer Engineering in Ethylene Polymerization", Proc. The Fourth Saudi Engineering Conference, Jeddah, 171-175, November 5-8, 1995.
  12. SH Hamid and AM Aitani. "NGLs: The Feedstocks of Choice for Petrochemicals Production in the GCC Countries," Proc. Gas Processors Association GCC-Chapter, Bahrain, Fourth Technical Meeting, November 1-16, 1995.
  13. AG Maadhah, M Atiqullah, and SH Hamid, “Strategic Development of Polymeric R & D Programs in Saudi Arabia,” Proc. Second Symposium on Technologies, Economics, and Investment Opportunities in Petrochemical Industries in the Kingdom of Saudi Arabia, KACST, Riyadh, Saudi Arabia, 1-29, October 15-17, 1996.
  14. AM Aitani, SH Hamid, and AK Lee, “Utilization of low value heavy refinery residues for the production of selected petrochemicals,” Proc. Second Symposium on Technologies, Economics, and Investment Opportunities in Petrochemical Industries in the Kingdom of Saudi Arabia, KACST, Riyadh, Saudi Arabia, 1-14, Oct. 15-17, 1996.
  15. SH Hamid, I Hussain, and F Rahman “Economic Evaluation of Plastics Recycling in Saudi Arabia,” Proc. Second Symposium on Technologies, Economics, and Investment Opportunities in Petrochemical Industries in the Kingdom of Saudi Arabia, KACST, Riyadh, Saudi Arabia, 1-15, October 15-17, 1996.
  16. A Rehman, SH Hamid, AKK Lee, E Iwamatsu, E Hayashi, Y Sanada, and T Yoneda, “Characterization of Hydrodesulfurization Catalyst”, Proc. 3rd International Conference on Chemistry in Industry, Bahrain, 401-410, November 18-20, 1996.
  17. E Iwamatsu, E Hayashi, Y Sanada, T Yoneda, S Ahmed, S Ali, A Lee, and SH Hamid, “Development of Heavy Oil Hydrocracking Catalysts—Catalyst Characterization with Temperature Programmed Desorption, ‑Reduction, and –Sulfidation,” Proc. International Symposium on the Advances in Catalysis and Processes for Heavy Oil Conversion, American Chemical Society (ACS), San Francisco, USA, 326-330, April 13-17, 1997.
  18. E Hayashi, E Iwamatsu, M Biswas, S Ali, Y Yamamoto, Y Sanada, A Lee, SH Hamid, and T Yoneda, “Catalytic Activity of Cobalt Oxide Loaded on High Surface Area Smectite for Thiophene Hydrodesulfurization,” Proc. International Symposium on the Advances in Catalysis and Processes for Heavy Oil Conversion, American Chemical Society (ACS), San Francisco, USA, 392-395, April 13-17, 1997.
  19. AG Maadhah, SH Hamid, A Aitani, and A Lee, “Configuration and Economic Evaluation of a Cogeneration Refinery in Saudi Arabia,” Proc. 15th World Petroleum Congress, Beijing, China, 915-921, July, 1997.
  20. SH Hamid, and I Hussain, “Technical Aspects of Plastic Recycling,” Proc. Second Specialty Conference on Environmental Progress in the Petroleum & Petrochemical Industries, Manama, Bahrain, 465-474, November 17-19, 1997.
  21. MA Ali and SH Hamid, “Oxygenated Gasoline Helps Reduce Air Pollution Problem,” Proc. Second Specialty Conference on Environmental Progress in the Petroleum & Petrochemical Industries, Manama, Bahrain, 465-474, Nov. 17-19, 1997.
  22. SH Hamid, MA Ali, M Al-Saleh, E Hayashi, E Iwamatsu, and Y Sanada, “Studies on High-Performance Catalysts Development For Heavy Oil & Residue Hydrocracking,” Proc. OAPEC-IFP Joint Workshop on Improving the Efficiency in Refining Operations and its Economical Yield, Rueil-Malmaison, France, June 24-26, 1997.
  23. E Iwamatsu, E Hayashi, Y Sanada, SH Hamid, S Ahmed, M Al-Saleh, “Development of Heavy Oil Hydrocracking Catalysts, Characterization of Clay Based Catalysts,” Proc. OAPEC-IFP Joint Workshop on Improving the Efficiency in Refining Operations and its Economical Yield, Rueil-Malmaison, France, June 24-26, 1997.
  1. E Iwamatsu, SA Ali, ME Biswas, S Ahmed, SH Hamid, Y Sanada, and T Yoneda, “Thiophene Hydrodesulfurization over Cobalt Oxide Loaded Smectite Clay Minerals,” Proc. 216th ACS National Meeting, Division of Fuel Chemistry, American Chemical Society (ACS), Boston, USA, vol. 43, No. 3, 543-546, August 22 – 27, 1998.
  1. SH Hamid, “A Rapid Method for Determination of Ni-Quencher and HALS Type Light Stabilizer in Polyolefins,” Proc. 219th ACS National Meeting, Division of Polymer materials: Science and Engineering (PMSE), American Chemical Society (ACS), San Francisco, USA, 25-26, March 26-30, 2000.
  2. SH Hamid, "Role of Thermal Degradation of Polyethylene in Natural Weathering Conditions," Proc. ANTEC 2000, Society of Plastic Engineers, Orlando, Florida, USA, 3768-3771, May 7-11, 2000.
  3. S. H. Hamid, I. Hussain, and K. Alam, “Loss of Additives From Films Exposed To Harsh Outdoor Climate Of Saudi Arabia”, 4th Chemistry in Industry Conference & Exhibition, SAS-ACS, Manama, Bahrain, October 30 - November 1, 2000
  4. H. H. Redhwi, M. A. Saleh, S. A. Ali, T. Inui, A. H. Al-Abdulal, and A. S. Al-Ghamdi, “Development of High Performance Catalyts for Heavy Oil Upgrading”, 4th Chemistry in Industry Conference & Exhibition, SAS-ACS, Bahrain, 2000
  5. M. A. Ali, T. Kimura, M. A. Al-Saleh, T. Inui, H. H. Redhwi, and Y. Suzuki, “Hydrocracking Activity of Noble Metal Modified Clay-Based Catalysts Compared with a Commercial Catalyst”, 4th Chemistry in Industry Conference & Exhibition, SAS-ACS, Bahrain, 2000
  6. W. M. Sackinger, H.H. Redhwi, and H. Hamawa, “Creation of Light Olefins from Methane and Heavy Alkanes in Low-Density Plasmas”, Proceedings of ME Petrotech 2001, Bahrain, 28-31 October, 2001-11-23
  7. M.F. Ali, H.H.Redhwi, and M.N. Siddiqui, “Coprocessing of Model and Waste Plastics with Petroleum Residues”, Proceedings of ME Petrotech 2001, Bahrain, 28-31 October, 2001-11-23
  8. M. A. Ali, S, Ahmed, T. Kimura, A. Hasan, H.H. Redhwi, “Modification of Commercial USY Zeolite for Development of Hydrocracking Catalyst”, Proceedings of ME Petrotech 2001, Bahrain, 28-31 October, 2001
  9. M. N. Siddiqui; M. F. Ali and S. H. H. Redhwi “Catalytic Conversion of Waste Plastics/Petroleum Resid Mixtures into Transportation Fuels, Preprints, American Chemical Society, Division of Petroleum Chemistry,  Volume 47, No. 4, August, 2002, p. 374, Boston, USA.
  10. M. F. Ali,  M. N. Siddiqui and S. H. H. Redhwi, “Study on the Conversion of Waste Plastics/Petroleum Resid Mixtures to Transportation Fuels”, : The 2nd International Symposium on Feedstock Recycling of Plastics (ISFR’02), September 8-12, 2002, Ostend, Belgium.
  11. M. F. Ali,  M. N. Siddiqui and S. H. H. Redhwi, “Coprocessing of Plastics with Petroleum Residues” Sixth Saudi Engineering Conference, December  14-16, 2002, KFUPM, Dhahran, Saudi Arabia, .
  12. H. H. Redhwi and A. AitaniOil Refining & Petrochemicals in the Middle East, World Refining Association, January 22-23, 2002, Abu Dhabi, UAE
  13. Maadhah, A. G., T. Ino, H.Redhwi, M. Abul-Hamayel, A. Aitani, “Integrating Refining and Petrochemicals Feedstocks Through a Novel FCC Process”, Proc.  The 6th Saudi Engineering Conference, KFUPM, Dhahran, S. Arabia, Dec. 14-17, 2002.
  14. H. H. Redhwi, S. A. Ali, and S. Ahmed, Development of Heavy Oil Hydrocracking Catalyst, Proceedings of 6th Saudi Engineering Conference, KFUPM, Dhahran, Saudi Arabia, December 14-17, vol. 2, 243-255, 2002.
  15. Iwamatsu, E. E., E. Hiyashi, Y. Sanada, M. A. Ali, S. Ahmed, H. Hamid, R. Sakurovs and T. Yoneda,  Proton Magnetic Resonance Thermal Analysis of Asphaltene wot Co Catalyst, Proceedings of the 12th Saudi-Japanese Catalyst Symposium, KFUPM, Dhahran, Saudi Arabia, December 15-16, Paper No. 12, 2002
  16. Redhwi, H. H., M. A. Al-Saleh, S. A. Ali, and S. Ahmed, Development of High Performance Catalyst for Heavy Oil Upgrading, Proceeding of the 17th World Petroleum Congress, Rio De Janeiro, Brazil, Sept.1-5, 2002, Block 2, Forum 9, 2002
  17. M.S. Hussain, S.A.Awan, M. A. Khan, and H. Hamid, “Pulsed Laser Polymerization of Methyl Methacrylate Using Wilkinson’s Catalyst as a Photoinitiator”, American Chemical Society (ACS) Symposium Series 847, 451-461, 2003
  18. Redhwi, H. H., T. Ino, Y. Fujiyama, K. Kleemeier, C. Dean, M. Al-Nemr, M. Abul-Hamayel, and A. Maadhah, “Meeting Olefins Demand in a Novel FCC Technology”, 18 World Petroleum Congress (18WPC), Johannesburg, South Africa, Block 2, Forum 10 paper, 24-29 September, 2005
  19. Ino, T, Y. Fujiyama, H.H. Redhwi, R. Saeed, M. Abul-Hamayel, A. Aitani, K. Kleemeier, C. Dean, M. Al-Nemr, “Development of a high-severity FCC process: an overview”, ACHEMAMERICA 2nd Int'l Exhibition on Process Technologies: Int'l Conference on Refining and Petrochemicals, Mexico City, April 12-15, 2005
  20. Y. Fujiyama, H. Redhwi, A. Aitani, and C. Dean, “Development of Integrated Conversion Refinery Process: High Severity FCC”, 7th Int’l Symposium on FCC Advances Meeting, San Francisco, Sept. 2006
  21. C. Dean, Y. Fujiyama, H. redhwi, A. Aitani, M. Abul-Hamayel, and M. Saeed, “Development of HS-FCC Precess: Results of Pilot Plant vs. Demo Plant”, 5th Petrotech Conference, Jan. 2006, Manama, Bahrain
  22. Siddiqui, M. N. and Redhwi, H. H: “Recycling of Waste Polyethylene Terephthalate (PET) into Feedstock Monomers”, TechConnect World 2011 Conference and Trade Show, Boston, Massachusetts, USA, June 13-16, 2011
  23. Siddiqui, M. N. and Redhwi, H. H.: “Effect of different nanomaterials on the durability and mechanical properties of LDPE nanocomposite”, Austrian-Slovenian Polymer Meeting (ASPM), Bled, Slovenia, pp. 84-85, April 3-5, 2013
  24. Siddiqui, M. N. and Redhwi, H. H: “Conversion of Waste PET into Important Chemicals Using Amines”, 7th International Symposium on Feedstock Recycling of Polymeric Materials (ISFR2013), New Delhi, India, October 23-26, 2013
  25. Siddiqui, M. N. and Redhwi, H. H.: “Synthesis of Silver Nanoparticles for Preparing Bio-Nanocomposites with Built-in Antimicrobial Properties”, Global Sustainable Biotech Congress (GSBC2014), Jalgaon, India, December 1-5, 2014
  26. Siddiqui, M. N.; Redhwi, H. H.; Younas, M. and Hussain, S.: “Effect of Different Fillers on the Durability and Mechanical Properties of LDPE and PVC Composites”, 249th ACS National Meeting & Exposition, Denver, CO, USA, Preprints, Division of Polymeric Materials: Science & Engineering, March 22-26, 2015

     

C.     Publications in Periodicals (10)

    1. SH Hamid and A Aitani, "Plentiful Natural Gas Headed for Big Growth in Mid-east," Oil & Gas Journal, Jan. 23, 51-55, 1995.
    2. AM Aitani and SH Hamid, "Benzene Reduction in Motor Gasoline-A Review of Options," Oil-European Magazine, 2, 28-32, 1995.
    3. SH Hamid and A Aitani, "Natural Gas Liquids For Petrochemical Production In GCC Countries,” Hydrocarbon Technology International (HTI) Quarterly, 97-101, Spring 1996.
    4. A Aitani and SH Hamid, “Downstream In The Persian Gulf-1, Gulf Countries Continue To Increase Refinery Capacity, Complexity,” Oil & Gas Journal, September 15, 36-41, 1997.
    5. A Aitani and SH Hamid, “Downstream In The Persian Gulf-2, The Persian Gulf’s Petrochemical Industry is Proliferating,” Oil & Gas Journal, September 22, 73-79, 1997.
    6. A Aitani and SH Hamid, “Downstream In The Persian Gulf-Conclusion, To Diversify Its Petrochemicals Portfolio, GCC Needs Liquid Feeds,” Oil & Gas Journal, September 29, 96-98, 1997.
    7. A Maadhah, A Aitani, and SH Hamid, “Hydrocarbon Processing in GCC Countries,” Hydrocarbon Engineering, September, 16-26, 1998.
    8. Redhwi, H.H, and A. M. Aitani, Oil and Gas European Magazine, 1, 36-38, 2002,
    9. A. Maadhah, M. Abul-Hamayel, H. Redhwi, A. Aitani, M. Saeed and T. Ino, “Integrating Refining and Petrochemicals”, Hydrocarbon Engineering, 49-54, June 2003
    10. Fijiyama, Y., H.H. Redhwi, A. Aitani, R. Saeed, and C. Dean, “Demonstration plant for new FCC technology yields increased propylene” Oil & Gas Journal, Vol. 103, Issue 36, pp. 62-67, September 26, 2005
 

Patents Awarded

1. Iwamatsu, E., E. Hayashi, Y. Sanada, S. A. Ali, H.Hamid and A. Lee (2006).  Process for hydrodesulfurization of sulfur-containing hydrocarbons, Japanese Patent No. 3763628 issued on January 27, 2006.

2. Inui, T., T. Kimura, H. Hamid, M. Al-Saleh, M. A. Ali, S. Ahmed and S. A. Ali (2006). A hydrotreating catalyst for heavy hydrocarbon oil, a manuacture method of that catalyst, and a hydrotreating method of heavy hydrocarbon oil using that catalyst, Japanese Patent No. 3803732 issued on May 19, 2006.

3. Okuhara. T., Ino. T., Redhwi, H., Abul-Hamayel, M., Aitani, and A., Al-Maghrabi, A., (2008). Fluidized Catalytic Cracking Process for Heavy Oil, Japanese Patent No. 4223690 Issued on Date 28 November, 2008

Patents Filed

  1. Hamid, H., E. Iwamatsu, S. A. Ali, and Y. Sanada (2004). Catalyst support and hydroprocessing catalyst for residual oil conversion, submitted to US Patent Office.
  2. Sackinger, W., Redhwi, H., and Aitani, A., System and Method for Conversion of Molecular Weights of Fluid, US Patent Application No. 12/458551, 2009
  3. Sackinger, W., Redhwi, H., Aitani, A., and Ali, M., System and Method for Conversion of Molecular Weights of Fluid, US Patent Application No. 12/458550, 2009
  4. Inui, T., Kimura, T., Al-Saleh, Redhwi, H., Ali, M., and Ahmed, S., (2006). Catalyst Exhibiting Hydrogen Spillover Effect, US Patent Publication No., US2010/0240522 A1, 2010
Inui, T., Kimura, T., Suzuki, Y., Enomoto, T., Redhwi, H., Al-Saleh, M., Ali, M., Ahmed, S., and Ali, S., (2002). Catalyst for Hydrogenating Heavy Hydrocarbon Oil. Its Production Method, and Method for Hydrogenating Heavy Hydrocarbon Oil Using Catalyst. Japanese Patent No. JP2002210362, Publication Date 30/07/2002.


Image