Research interests include :


Publications

 

1)          

1)           Said, A.S. and Al-Ali, H. H., "The Non-Linear Isotherm From Extraction to Chromatography", Journal of HRC & CC, 1981, Vol. 4, pp. 474-476.

2)           Said, A.S., Al-Ali, H., and Hamad, E., "Mathematics for Chromatography - Part I: Concentration Distribution and Their Moments", Journal of HRC & CC, 1982, Vol. 5, pp. 306-310.

3)           Said, A.S., Al-Nafea, M., Al-Ali, H., and Hamad, E., "Concentration Profiles and Breakthrough Curves in Non-Linear Chromatography", Journal of HRC & CC, 1982, Vol. 5, pp. 674-680.

4)           Al-Ali, Habib H. and Selim, Sami M., "Simultaneous Development of Velocity and Temperature Profiles in the Entrance Region of a Parallel-Plate Channel: Laminar Flow with Uniform Heat Flux", Chemical Engineering Communication, 1992, Vol. 112, pp. 1-19.

5)           Al-Ali, Habib H. and Selim, Sami M., "Analysis of Laminar Flow Forced Convection Heat Transfer with Uniform Heating in the Entrance Region of a Circular Tube", Canadian J. Chem. Eng., 1992, Vol. 70, pp. 1101-1107.

6)           Al-Ali, Habib H. and Selim, Sami M., "Momentum and Heat Transfer in the Entrance Region of a Parallel - Plate Channel: Developing Laminar Flow with Constant Wall Temperature", Applied Scientific Research, 1993,      Vol. 51, pp. 663-675.

7)           Demirel, Y. and Al-Ali, H. H., "Thermodynamic Analysis of Connective Heat Transfer in a Packed Duct with Asymmetrical Wall Temperatures", Int. J. Heat Mass Transfer, Vol. 40, No. 5, pp. 1145-1153, 1997.

8)           Chebbi, R., Al-Ali, Habib H., and Selim, Sami M., “Simultaneously Developing Laminar Flow and Heat Transfer in the Entrance Region of a Circular Tube with Constant Wall Temperature”, Chemical Engineering Communication, Vol. 160,  pp. 59-70, 1997.

9)           Demirel, Y., Al-Ali, H.H., and Abu-Al-Saud, BA, “Entropy Generation of Convection Heat Transfer in an Asymmetrically Heated Packed Duct”, Int. Communications in Heat and Mass Transfer, Vol. 24, No. 3, pp. 381-390, 1997.

10)       Makkawi, Y., Demirel, Y. and Al-Ali, H. H., " Numerical Analysis of Convective Heat Transfer in a Rectangular Packed Duct with Asymmetric Heating", Energy Conversion Management, Vol. 39, pp. 455-463, 1998.  .

11)       Demirel, Y., Abu Al-Saud, B. A., Al-Ali, H. H., and Makkawi, Y., "Packing Size and Shape Effects on Forced Convection in Large Rectangular Ducts with Asymmetric Heating”, Intl. J. Heat Mass Transfer, Vol. 42, pp. 3267-3277, 1999.

12)       H. H. Al-Ali, M. S. Al-Gallaf, Y. Demirel, "Numerical Analysis of Transient Heat Transfer in a Rectangular Packed Duct with Asymmetric Heating”, Submitted to Intl. J. Heat Mass Transfer, January 1999.

13)       Demirel, Y., Al-Ali, H.H., and Abu-Al-Saud, B.A., “Enhancement of Convection Heat Transfer in a Rectangular Duct”, Applied Energy, Vol. 64, pp. 441-451, 1999.

14)       Y. Demirel, R. N. Sharma, H. H. Al-Ali, " On the Effective heat Transfer Parameters in a Packed Bed”,  Intl. J. Heat Mass Transfer, Vol. 43, pp. 327-332, 2000.

15)       A.M. Aitani, M.F.Ali, and H.H. Al-Ali “A Review of Non-Conventional Methods for the Desulfurization of Residual Fuel Oil” Petroleum Science and Technology, 18(5&6), 537-553 (2000).

 

16)  A.A.Kareeri, H.D Zughbi, and H.H. AlAli, ‘Simulation of Flow Distribution in  Radial Flow Reactor” Ind. & Engineering Chem. Research (IECR),45,2862-2874,2006.

 

17)  H. Al-Ali, K. AlQahtani and A. Elkamel, ‘A Mathematical Programing Model for Achieving Total Emission Control in the Petroleum Refining Industry’ Int. J. Oil , Gas and Coal Technology, Vol 1, No. 4, 2008.

 

18)    Habib H. Al-Ali, Yousef Saif, Ali Elkamel and Ali Lohi,’ Optimal Production Planning of Electricity from Coal-Fired Power Plant Networks under Environmental Considerations’, American J. of Engineering and Applied Sciences 1 (4): 356-367, 2008.

 

19)  Habib H. Al-Ali, Yousef Saif, Ali Elkamel and Ali Lohi ‘Integrating Renewable and Nonrenewable Energies in Power Plant Planning’,  American J. of Engineering and Applied Sciences. 3 (2): 333-341, 2010.

 

 

      Papers in Refereed Conferences:

1)      Bell, I. A., Al-Ali, Habib, and Al-Daini, A. J., “Experimental Parametric Studies of the Thermal Performance of Solar Collectors”, World Renewable Energy Congress IV, 15-21 June 1996, Denver, Colorado, USA.

2)           Bell, I. A., Al-Daini, A. J., Al-Ali, Habib, Abdel-Gayed, R. G., and Duckers, L., “The Design of an Evaporator/Absorber and Thermodynamic Analysis of a Vapor Absorption Chiller Driven by Solar Energy”, World Renewable Energy Congress IV, 15-21 June 1996, Denver, Colorado, USA.

3)      Demirel, Y., Al-Ali, H.H., and Abu-Al-Saud, B.A., “Volumetric Entropy Generation of Connective Heat Transfer in an Asymmetrically Heated Packed Duct”, 4th International Symposium on Heat Transfer in Beijing, pp. 520-525, October 7-11, 1996.

4)           Demirel, Y., Al-Ali, H.H., and Abu-Al-Saud, B.A., “Convection Heat Transfer in a Large Rectangular Packed Duct with Asymmetrical Heating”, 7th AIAA/ASME Joint Thermophysics and Heat Transfer Conference Albuquerque, New Mexico, USA, June 15-18, 1998. 

5)           Demirel, Y., Al-Ali, H.H., and Abu-Al-Saud, B.A., “Enhancement of Convection Heat Transfer in a Rectangular Duct”, The 7th International Energy Conference and Exhibition ENERGEX ’98, Manama, Bahrain, November 19-21, 1998.

6)           A. Kareeri,H. Zughbi and H.H. AlAli, ‘Simulation of ContinuousCatalyst Regeneration Reactor’ presented in Australian Chemical Engineering Conference (Chemica) Sep. 26-29,2004.

7)           A. Kareeri,H. Zughbi and H.H. AlAli, ‘Simulation of Flow in a Flow Fixed Bed Reactor (RFBR)’ presented in Norway Fourth International Conference on Computational Fluid Mechanics June 6-8 2005.