|
1. Tests
for Concrete Strength and Durability, during
Short-Term Course on “Assessment and Repair of Reinforced Concrete
Structures: Principles and Applications”, organized by the Department of
Civil Engineering, KFUPM, May 10 to 14, 2008.
2. Requirements
for Concrete Durability, during 2nd Workshop on “Concrete Deterioration and its
Prevention”, organized by the Center for Engineering Research, Research
Institute, KFUPM, November 7, 2007.
3. Chemical Admixtures:
Plasticizers and Corrosion Inhibitors,
during Short-Term Course on “Protection of Reinforced Concrete
Structures in Hot and Aggressive Exposures”, organized by the Department
of Civil Engineering, KFUPM, May 26 to 30, 2007.
4. Tests
for Concrete Properties other than Strength,
during Short-Term Course on “Assessment and Repair of Reinforced
Concrete Structures”, organized by the Department of Civil Engineering,
KFUPM, April 8 to 12, 2006.
5. Factors
Affecting Corrosion of Steel in Concrete, during Short-Term Course on “Principles of Cathodic
Protection and Coating Technology”, organized by the Department of
Mechanical Engineering, KFUPM, April 8 to 12, 2006.
6. Corrosion
Monitoring of Concrete Structures, during Short-Term Course on “Principles of Cathodic
Protection and Coating Technology”, organized by the Department of
Mechanical Engineering, KFUPM, April 8 to 12, 2006.
7. Proportioning
of Concrete Mixes,
during Short-Term Course on “Total Quality Inspection of Concrete and
Reinforced Concrete Structures”, organized by the Organization
Development Department, Royal Commission, Jubail, December 17 to 21,
2005.
8. Optimal
Design of Concrete Mixes,
during Short-Term Course on “Optimal Engineering Designs: Methods and
Applications”, organized by the Department of Civil Engineering, KFUPM,
May 8 to 12, 2004.
9. Optimal
Design of Selected Water Treatment Units, during Short-Term Course on “Optimal Engineering Designs:
Methods and Applications”, organized by the Department of Civil
Engineering, KFUPM, May 8 to 12, 2004.
10.Optimal Design of
Water Distribution Pipes, during Short-Term Course on “Optimal Engineering Designs:
Methods and Applications”, organized by the Department of Civil
Engineering, KFUPM, May 8 to 12, 2004.
11. Service
Life Prediction of Corroding R.C. Members, during Short-Term Course on “Protection of
Reinforced Concrete Structures”, organized by the Department of Civil
Engineering, KFUPM, (Three times) February 2 to 6, 2002, May 1 to
5, 2004, and May 26 to 30, 2007.
12.
Corrosion
Measurements of Steel in Concrete, during a Training Program on “Concrete Technology and
Durability” during December 20 – March 14, 2004 for the employees of
Fugro-Suhaimi Ltd (Saudi Arabia) at KFUPM, Dhahran, Saudi Arabia.
13.
Seismic Behavior and
Design of Dual Structural Systems, during Short-Term Course on “Earthquake-Resistant
Designs of Concrete and Steel Structures”, organized by the Department
of Civil Engineering, KFUPM, April 28, 2003.
14. Seismic Behavior and
Design of R/C Beam-Column Joints, during Short-Term Course on “Earthquake-Resistant
Designs of Concrete and Steel Structures”, organized by the Department
of Civil Engineering, KFUPM, April 28, 2003.
15.
Properties of
Concrete Influencing Cracking, during Short-Term Course on “Crack-Controlled Design of
Concrete Structures”, organized by the Department of Civil Engineering,
KFUPM, May 11 to 15, 2002.
16.
Diagnosis
of Corrosion Damage in Reinforced Concrete Structures Prior to
Rehabilitation,
CE 599 Seminar, Department of Civil Engineering, KFUPM, April 16, 2002.
17.
Reinforcement
Corrosion in Concrete Structures, Its Monitoring and Service Life
Prediction – A Review,
CE 599 Seminar, Department of Civil Engineering, KFUPM, October 09,
2001.
18.
Effects of Concrete
Parameters and Chlorides on Corrosion of Reinforcement in R.C.
Structures,
during Training course on “Corrosion of Reinforcement and Deterioration
of Concrete – Preventive Measure” during 6-7 September 1995 for
Assistant Engineers/Executive Engineers at Central Public Works
Department (CPWD) Training Institute, New Delhi. |
