|
1. Shamsad
Ahmad,
S. U. Rahman and M. Abdul Kareem, “Recent Developments in Sulfur
Concrete Technology” Proceedings of The 7th International
Conference and Exhibition on Chemistry in Industry (CHEMINDIX 2007),
26-28 March 2007, Bahrain (Proceedings available only in CDs without a
continuous page numbering).
[Abstract]
2.
Abul K.
Azad, Shamsad Ahmad and Syed A. Azher, “A Damage-Propagation
Model for Chloride-Induced Corrosion of Reinforced Concrete Beams”,
Proceedings of 8th International Conference on Concrete in
Hot & Aggressive Environments, Bahrain, 27-29 November 2006 (Proceedings
available only in CDs without a continuous page numbering).
[Abstract]
3. Shamsad
Ahmad, “Strategy
for Monitoring and Repairing of Concrete Bridges Exposed to Corrosive
Environments”,
Proceedings of Third Gulf Conference on Roads (TGCR06), Muscat, 6-8
March 2006, pp. 228-235.
[Abstract]
4. Shamsad
Ahmad,
Abul Kalam Azad, and Kevin F. Loughlin, “A Study of
Permeability and Tortuosity of Concrete”, Proceedings of 30th
Conference on Our World in Concrete & Structures (OW 05), Singapore,
23-24 August 2005, pp. 153-160.
[Abstract]
5. Shamsad
Ahmad, “Methodology
for the Assessment of Corrosion Damage in Reinforced Concrete
Structures”,
Proceedings of Eighth International Conference on Concrete Engineering &
Technology (CONCET 2004), Kuala Lumpur, Malaysia, 19-21 April 2004, pp.
66-72.
[Abstract]
6.
Shamsad
Ahmad, “Improving Durability of R.C. Members through
Optimum Selection of the Levels of Corrosion Cracking Factors”,
Proceedings of 7th International Conference on Concrete in
Hot and Aggressive Environments, Bahrain, 13-15 October 2003, pp.
227-241.
[Abstract]
7. Shamsad
Ahmad,
Omar S.
Baghabra Al-Amoudi, and Mohammad Maslehuddin, “Reinforcement
Corrosion in the Arabian Gulf and its Prevention– A Review”,
Proceedings of 7th International Conference on Concrete in
Hot and Aggressive Environments, Bahrain, 13-15 October 2003, pp.
211-225.
[Abstract]
8.
Shamsad Ahmad,
Javed Khan and Shehzad Ahmed Ansari, “Wastewater Management for
Electroplating Industries”, Proceedings of the International
Conference on Environmental Challenges for the New Millennium, 25th-27th
Nov. 1999, New Delhi, India, pp. 535-541.
[Abstract]
9.
Shamsad Ahmad
and B. Bhattacharjee, “Effect of Acidic Waste Water on Mortar and
Concrete”, Proceedings of International Symposium on Innovative
World of Concrete-98, 16-19 November, 1998, Calcutta, India, pp. 1.31 to
1.38.
[Abstract]
10.
Shamsad Ahmad
and B. Bhattacharjee, “Influence of Chloride Content, Cover, and
Concrete Mix Parameters on Post Depassivation Service Life of Chloride-
Contaminated R.C. Structures”, Proceedings of International
Conference on Maintenance and Durability of Concrete Structures, 4-6
March, 1997, J.N.T. University, Hyderabad, India, pp. 68-72.
[Abstract]
11.
Shamsad Ahmad
and B. Bhattacharjee, “Rebar Corrosion Risk due to Free Chloride
Under Tropical Conditions”, Proceedings of International Conference
on New Challenges for Civil Engineers of Developing Countries in the
21st Century, 29 February, 1, 2 March, 1996, Civil Engineering
Department, Jamia Millia Islamia, New Delhi, India, pp. 193-198.
[Abstract]
12.
Shamsad Ahmad,
S.M. Abbas and Asif Hussain, “Environmental Problems due to Fly Ash
and Its Use as Building Material”, Proceedings of International
Conference on New Challenges for Civil Engineers of Developing Countries
in the 21st Century, 29 February, 1, 2 March, 1996, Civil Engineering
Department, Jamia Millia Islamia, New Delhi, India, pp. 265-268.
[Abstract]
13.
Shamsad Ahmad
and S.M. Abbas, “Environmental Risk Assessment”, Proceedings of
International Conference on New Challenges for Civil Engineers of
Developing Countries in the 21st Century, 29 February, 1, 2 March, 1996,
Civil Engineering Department, Jamia Millia Islamia, New Delhi, India,
pp. 77-80.
[Abstract]
14.
Shamsad Ahmad
and B. Bhattacharjee, “Diagnostic Methods for Rehabilitation of
Corrosion Damaged R.C. Structure”, Proceedings of National
Conference on Civil Engineering Materials and Structures, 19-21 January,
1995, Osmania University, Hyderabad, India, pp. 464-475.
[Abstract]
|