List of Publications

 

  Journals Papers

 

         M. Hamed, M. Esmail, M Habib. Badr, S Said, and Al-Shayea, N.A., "Energy, Exergy and Uncertainty Analyses of the Thermal Response Test for a Ground Heat Exchanger", Submitted for publication in the International Journal of Energy Research, (ER-08-0630.R1), 2008.

 

1.          Al-Ghamdi, H., Abduljauwad, S., Siddiqui, J., Al-Shayea, N.A., and Asi, I.,”Cover Requirement and Stability of Horizontally Bent Buried Pipelines,” (Paper JAM-05-1260), ACCEPTED for publication, 2006.

 

2.          Naser A. Al-Shayea, "Crack Propagation Trajectories for Rocks Under Mixed Mode I-II Fracture", Engineering Geology Journal, Vol. 81, Issue 1, September 2005, pp. 84-97.

 

3.          N. Al-Shayea, "Effects of Testing Methods and Conditions on the Elastic Properties of Limestone Rock", Engineering Geology Journal, Vol. 74, 2004, pp. 139 - 156.

 

4.          S. Abduljauwad, H. Al-Ghamedy, J. Siddiqui, I. Asi, N. Al-Shayea, "Stability of Vertically Bent Pipelines Buried in Sand", Journal of Pressure Vessel Technology (JPVT), Transactions of the ASME, Vol. 126, August 2004, pp. 382-390.

 

5.          Disc.

 

6.          N. Al-Shayea, K. Mohib, and M. Baluch “A Plastic-Damage Model for Stress-Strain Behavior of Soils”, International Journal of Damage Mechanics, Vol. 12, Issue 04, October 2003. pp 305-329.

 

7.          Al-Shayea, N.A., Abduljauwad, S., Bashir, R., Al-Ghamdi, H., and Asi, I., ”Determination of Parameters for Hyperbolic Model of Soils”, proceedings of the Institute of Civil Engineers (ICE), Geotechnical Engineering Journal, London, UK, Vol. 156, issue GE2, April 2003, pp. 105-117.

 

8.          N. Al-Shayea, “Comparing Reservoir and Outcrop Specimens for Mixed Mode I-II Fracture Toughness of a Limestone Rock Formation at Various Conditions”, J. of Rock Mechanics and Rock Engineering, Vol. 35 , No. 4 , October 2002, pp. 271-297.

 

9.          Al-Shayea, N.A.,  “The Combined Effect of Clay and Moisture Content on the Behavior of Remolded Unsaturated Soils,” Engineering Geology Journal, Vol. 62, No. 4, December 2001, pp. 319-342.

 

10.       Erra.

 

11.       Shahid Azam, Sahel N. Abduljauwad, Naser A. Al-Shayea, and Omer S. B. Al-Amoudi, “Effects of Calcium Sulfate on Swelling Potential of an Expansive Clay,” ASTM Geotechnical Testing Journal, GTJODJ, Vol. 23, No. 4, December 2000, pp. 389-403.

 

12.       K. Khan and Naser A. Al-Shayea, “Effect of Specimen Geometry and Testing Methods on Mixed-Mode I-II Fracture Toughness of a Limestone Rock from Saudi Arabia,” Rock Mechanics and Rock Engineering , Vol. 33, No. 3, July-September, 2000, pp. 179-206.

 

13.       N. A. Al-Shayea, K. Khan, and S. N. Abduljauwad, “Effects of Confining Pressure and Temperature on Mixed-Mode (I-II) Fracture Toughness of a Limestone Rock Formation,” International Journal of Rock Mechanics and Mining Sciences, Vol. 37, No. 4, June, 2000, pp. 629-643.

 14.       Naser A. Al-Shayea, “Inherent Heterogeneity of Sediments in Dhahran, Saudi Arabia – A Case Study,” Engineering Geology Journal , Vol. 56, No. 3-4, May 2000, pp. 305-323.

 15.       Naser A. Al-Shayea, “Influence of the Source Type on the 3-D Crosshole Tomography,” Soils and Foundations, the Journal of The Japanese Geotechnical Society, Vol. 39, No. 6, December 1999, pp. 125-131.

 16.       Naser A. Al-Shayea, “Generalized Influence Chart Based on Westergaard Method for Computation of Vertical Stress Increase,” Emirates  Journal for Engineering Research, EJER, Vol. 4, No. 1, (1999), pp. 22-31.

 

17.       Shahid Azam, Sahel N. Abduljauwad, Naser A. Al-Shayea, and Omer S. B. Al-Amoudi, “Expansive Characteristics of Gypsiferous/Anhydritic Soil Formations,” Engineering Geology Journal, Vol. 51, No. 2, December (1998), pp. 89-107.

 

18.       N. Krstulovic'-Opara, R. D. Woods, and Naser Al-Shayea, "Nondestructive Testing of Concrete Structures Using the Rayleigh Wave Dispersions Method," ACI Materials Journal, Title No. 93-M10, January-February (1996), pp. 75-86.

 

19.       Naser Al-Shayea, Review of the book Foundation Design and Construction, by M. J. Tomlinson, 6th ed., The Arabian Journal for Science and Engineering, Vol. 20, No. 4A, October (1995), pp. 737-738.

 

20.       M. H. Baluch, N. Al-Shayea and A. K. Azad, " Mode Shapes and Crack Damage in Subtangential Buckling of Columns", Transaction of the Canadian Society for Mechanical Engineering, Vol. 12, No. 4, 1988, pp. 183-189.

 

21.       Naser A.-R. Al-Shayea, Mohammed H. Baluch, and Abul K. Azad, "Influence of Non-propagative Cracks on Conservative Buckling of Columns", Transaction of the Canadian Society for Mechanical Engineering, Vol. 11, No. 4, 1987, pp. 215-220.

 

 

 

Conferencs Papers

 

Asi, I.M., Abduljauwad, S.N., Al-Ghamedy, H.N., Al-Shayea, N.A., and Siddiqui, J.A.,  "Development of a Computer Program for the Analysis and Design of Buried Pipelines," Proceedings of the 11th International Conference on Civil, Structural and Environmental Engineering Computing, St. Julians, Malta, B.H.V. Topping, (Editor), Civil-Comp Press, Stirlingshire, UK, paper # 229, 18-21 September, 2007.

 

1.          Naser Al-Shayea, “Pullout Capacity of Block Anchor in Unsaturated Sand", Proceedings of the Unsaturated Soils Conference 2006, ASCE, Carefree, Arizona, April 2-5, 2006, pp. 403-414.

 

2.          Naser Al-Shayea, “Failure of Rock Anchors along the Road-Cut Slopes of Dhila Descent, Saudi Arabia", Proceedings of International Conference on Problematic Soils (GEOPROB 2005), Eastern Mediterranean University, Famagusta, N. Cyprus, 25-27 May 2005, Vol. 3, pp. 1129-1136.

 

3.          Naser Al-Shayea, “Evaluation of Liquefaction Potential at a Petroleum Site, Jeddah, Saudi Arabia", Proceedings of the International Conference on Problematic Soils (GEOPROB 2005), Eastern Mediterranean University, Famagusta, N. Cyprus, 25-27 May 2005, Vol. 3, pp. 1039-1046.

 

4.          Naser Al-Shayea, “Failure of Rock Anchors along the Road-Cut Slopes of Dhila Descent, Saudi Arabia", Proceedings of the 2004 ISRM International Symposium (3rd ARMS 2004), Kyoto, Japan, Nov. 30 – Dec. 2, 2004.

 

5.          Naser Al-Shayea, “Trajectories For Crack Propagation Trajectories In Limestone Rocks Under Mixed Mode I-II Fracture", CONTRIBUTION OF ROCK MECHANICS TO THE NEW CENTURY (Editors: Ohnishi Y, Aoki K), Proceedings of the 2004 ISRM International Symposium/3rd Asian Rock Mechanics Symposium (ARMS), Kyoto, Japan, Nov. 30 – Dec. 2, 2004, Vols. 1 & 2, pp. 959-964.

 

6.          Naser Al-Shayea, “Crack Propagation Trajectories For Rocks Under Mixed Mode I-II Fracture", Proceedings of the Conference on Fracture at Multiple Dimensions, Moscow, 23-26 June 2003.

 7.          Azad, I. Asi, Naser Al-Shayea, M. Al-Suwaiyan, H. Al-Gahtani, and A. Khathlan, “Certification of Practicing Civil Engineers in Saudi Arabia: An opinion survey”, Proceedings of the 6th  Saudi Engineers Conference, KFUPM, Dhahran, Saudi Arabia, December 14-17, 2002, Vol. 1, pp. 99-110.

 

8.          Naser Al-Shayea, “Effects of cyclic loading and stress/strain level on the elastic properties of limestone”, Proceedings of the 2nd International Conference on Geotechnical and Geoenvironmental Engineering in Arid Lands (GEO2002), King Saud University, Riyadh, Saudi Arabia, 6-9 October 2002, pp. 95-100.

 

9.          Azad, I. Asi, Naser Al-Shayea, M. Al-Suwaiyan, H. Al-Gahtani, A. Khathlan and H. Al-Abdul Wahhab, “An opinion survey on Certification of Civil Engineers in Saudi Arabia”, Proceedings of a Symposium on Certification of Practicing Engineers in Saudi Arabia: Issues & Challenges, KFUPM, Dhahran, Saudi Arabia, April 30, 2002, English Part, pp. 19-26.

 10.       N. Al-Shayea, and K. Khan, “Fracture Toughness Envelope of a Limestone Rock at High Confining Pressure and Temperature”,  10Th International Conference on Fracture, Hawaii, 2-6 December 2001, Abstract: Delegate Manual, pp. 498; Full paper: CD-Rom “Advances in Fracture Research – Proceedings of ICF 10”, Posters, 2nd paper.

 

11.       N. Al-Shayea, K. Mohib, and M. Baluch, “Plastic-Damage Model for Stress-Strain Behavior of Soils”,  10Th International Conference on Fracture, Hawaii, 2-6 December 2001, Abstract: Delegate Manual, pp. 563; Full paper: CD-Rom “Advances in Fracture Research – Proceedings of ICF 10”, Damage Mechanics, 1st paper.

 

12.       N. Al-Shayea, K. Khan and Abdulraheem, “Fracture Toughness vs. Tensile Strength Reservoir Rocks from Saudi Arabia”, The 2001 ISRM sponsored International– 2nd Asian Rock Mechanics Symposium, Beijing, China, September 11-14, 2001, pp. 169 - 172.

 

13.       N. Al-Shayea and K. Khan, “Dynamic and Static Moduli of Limestone Rock from Saudi Arabia”, The 2001 ISRM sponsored International– 2nd Asian Rock Mechanics Symposium, Beijing, China, September 11-14, 2001, pp. 109 – 113.

 

14.       N. A. Al-Shayea, “ Practical Strategies for SASW Data Collection and Interpretation,” Proceedings of The 11th Asian Regional Conference on Soil Mechanics and Geotechnical Engineering, International Society for Soil Mechanics and Geotechnical Engineering, Seoul, Korea, Vol. 1, August 16-20 (1999), pp. 515-518.

 

15.       N. A. Al-Shayea, “ Detection of Subsurface Cavities Underlying Calcareous Soils,” Proceedings of The 2nd International Conference on Engineering of Calcareous Sediments, American Society of Civil Engineers - Saudi Arabia Section (ASCE-SAS), Bahrain , Vol. 1, February 21-24 (1999), pp. 273-282.

 

16.       S. Azam and N. A. Al-Shayea, “Clayey Behavior of Calcareous Soils,” Proceedings of The 2nd International Conference on Engineering of Calcareous Sediments, American Society of Civil Engineers - Saudi Arabia Section (ASCE-SAS), Bahrain , Vol. 1, February 21-24 (1999), pp. 199-208.

 

17.       S. N. Abduljauwad, S. Azam and N. A. Al-Shayea, “Effect of Phase Transformation of Calcium Sulfate on the Volume Change Behavior of Calcareous Expansive Soil,” Proceedings of The 2nd International Conference on Engineering of Calcareous Sediments, American Society of Civil Engineers - Saudi Arabia Section (ASCE-SAS), Bahrain , Vol. 1, February 21-24 (1999), pp. 209-218.

 

18.       Aksoy, F.Z. Khiari, and N. Al-Shayea, “Analysis of Soil Samples from Saudi Arabia Using Neutron Activation Spectrometry,” Proceedings of The 8th Congress of The International  Association of  Engineering Geology and the Environment, Vancouver, British Columbia, Canada , Vol. I, September 21-25 (1998), pp. 469-476.

 

19.       N. A. Al-Shayea, “Detection of Solution Cavities Using The Spectral-Analysis-of-Surface-Waves Method,” Proceedings of The 8th Congress of The International  Association of  Engineering Geology and the Environment, Vancouver, British Columbia, Canada , Vol. I, September 21-25 (1998), pp. 117-124.

 

20.       S. N. Abduljauwad, S. Azam, N. A. Al-Shayea, and Al-Amoudi “The Behavior of Geological Formations Containing Expansive Clays and Calcium Sulfate Phases,” Proceedings of The 8th Congress of The International  Association of  Engineering Geology and the Environment, Vancouver, British Columbia, Canada , Vol. I, September 21-25 (1998), pp. 169-175.

 

21.       Khaqan khan and Naser Al-Shayea, “ Compatibility of Clays in Different Chemical Environment -- A review,” Proceedings of a Symposium on Civil Engineering and The Environment, Held by Civil Engineering with the Cooperation of The British Council, King Fahd University of Petroleum & Minerals, Dhahran, Saudi Arabia, May 3-5 (1997), pp. 141-155.

 

22.       A. Khathlan,M. A. Baig, and N. A. Al-Shayea, "Effect of Subgrade Cavities on The Failure of RC Slabs", Proceedings of the International Conference on Advances in Computational Techniques for Structural Engineering, B.H.V. Topping (Editor), Civil-Comp Press, Edinburgh, Scotland, August (1996), pp. 301-306.

 

23.       Naser Al-Shayea and Richard Woods, "Imaging of Near-surface Cavities Using GPR, SASW and Crosshole Methods" Abstracts of The 20th General Assembly of The European Geophysical Society, Hamburg, Germany, 3-7 April, 1995, Annales Geophysicae, Part 1, Solid Earth Geophysics & Natural Hazards, Supplement 1 to Volume 13, Session SE13 Geophysical Methods for near-Surface Imaging and Monitoring, pp. C 96.

 

24.       Al-Shayea, N. A., Gilmore, P., and Woods, R. D., "Detection of Buried Objects by the GPR Method," Proceedings of the Fifth International Conference on Ground Penetrating Radar (GPR ‘94), Kitchener, Ontario, Canada, June 12-16, 1994, Volume 1, pp. 1-18.

 

25.       Naser Al-Shayea, Richard Woods, and Park Gilmore, “SASW and GPR To Detect Buried Objects,” Proceedings. of the Symposium on the Application of Geophysics to Engineering and Environmental Problems (SAGEEP ‘94), Boston, MA, USA, March 27-31, 1994, pp. 543-560.

 

26.       N. Krstulovic'-Opara, R. D. Woods, and Naser Al-Shayea, "Non-Destructive Testing of Concrete Structures Using Rayleigh Wave Dispersions Technique," SEM Fall Conference, Chicago, IL, USA, November 16-20, 1992.

 

27.       A. K. Azad, N. Al-Shayea and M. H. Baluch, " Elastic Buckling of a Crack Column by Subtangential Force", Abstract of the 21st Annual Meeting of the Society of Engineering Science, Blacksburg, VA, USA, Oct. 15-17, 1984, pp. 265.

 

 

Technical Reports & Proposals

 

1.          Al-Shayea, “Development of a Software to Evaluate Liquefaction Potential of Soils”, Final Report for the Project for Innovation Grants Scheme (IGS-22), College of Engineering Sciences, KFUPM, March 20 2006.

 

2.          Al-Shayea, et al., Contributing to the proposal "Increasing Enrolment in Graduate Programs" One of the KFUPM Strategic Plan Studies, the Office of Planning & Quality, KFUPM, December 2005.

 

3.          Al-Shayea, “Development of a Software to Evaluate Liquefaction Potential of Soils”, Progress report for the Project for Innovation Grants Scheme (051), College of Engineering Sciences, KFUPM, December 2005.

 

4.          Al-Shayea, et al., Contributing to the First Progress Report “Feasibility and Performance of Ground-Source Heat Pump in the Kingdom of Saudi Arabia”, ARP 23-083, KACST, Sept. 2005.

 

5.          Al-Shayea, et al., Contributing to the Report on "Terms of Reference, Saudi Arabian Higher Education Enhancement Project ", RI, KFUPM, July 2005.

 

6.          Al-Shayea, et al., Contributing to the Final Report "KFUPM Strategic Plan", the Office of Planning & Quality, KFUPM, June 2005.

 

7.          Al-Shayea, “Development of a Software to Evaluate Liquefaction Potential of Soils”, A Project Proposal for Innovation Grants Scheme (051), College of Engineering Sciences, May 2005.

 

8.          Al-Shayea, “Integrating Training Into Engineering Curriculum”, A Project Proposal for Innovation Grants Scheme (051), College of Engineering Sciences, May 2005.

 

9.          Al-Shayea, et al., Contributing to the Final Report "Civil Engineering Department, Self-Assessment Report", Deanship of Academic Development, KFUPM, May 2005.

 

10.       Al-Shayea, et al., Contributing to the First Progress Report "KFUPM Strategic Plan", the Office of Planning & Quality, KFUPM, April 2005.

 

11.       Al-Shayea, “Design Best-Practice for the Evaluation of Liquefaction Potential”, A Revised Version, CSD, Saudi Aramco, Febrauary 2005.

 

12.       Al-Shayea, et al., Contributing to the First Progress Report “: Size Optimization of Concrete Thrust Anchors for Pipelines”, PN CER2275, Center for Engineering Research, RI, KFUPM, October 2004.

 

13.       Al-Shayea, “Evaluation of Liquefaction Potential and Classification of Soil at Jeddah Refinery”, CSD, Saudi Aramco, September 2004.

 

14.       Al-Shayea, “Design Best-Practice for the Evaluation of Soil-Profile-Type Classification”, CSD, Saudi Aramco, September 2004.

 

15.       Al-Shayea, “Design Best-Practice for the Evaluation of Liquefaction Potential”, Revised Version, CSD, Saudi Aramco, September 2005.

 

16.       Al-Shayea, "Long-Term Strategic Plan", a Report Submitted to the Office of  Planning & Quality, KFUPM, April 2004.

 

17.       Al-Shayea, et al., Contributing to a proposal “Feasibility and Performance of Ground-Source Heat Pump in the Kingdom of Saudi Arabia”, ARP 23-083, KACST, March 2004.

 

18.       Al-Shayea, N.A., "Plastic-Damage Model for 3-D Stress-Strain Behavior of Soil," Final report submitted to the University Research Committee, KFUPM, Feb., 2004.

 

19.       Al-Shayea, N. A., et al., Contributions to The proposal "Development of a Strategic Plan for KFUPM", submitted to the University Planning Committee, KFUPM, May 27th , 2003.

 

20.       Al-Shayea, N.A., "Plastic-Damage Model for 3-D Stress-Strain Behavior of Soil," 2nd progress report submitted to the University Research Committee, KFUPM, September, 2003.

 

21.       Al-Shayea, et al., Contributing to final report on “Verification of Structural Analysis of Two Buildings (PN CER2244), Center for Engineering Research, RI, KFUPM, January 2003.

 

22.       M. Hariri, Naser Al-Shayea, A. Qahwash, A. Al-Shaibani, “Investigation of Current Landslide and Potential Rock Slope Failures along in Dilah Descent, Abha Area”, a Proposal submitted to the Minster of Communication (PN# ESD2234), Department of Earth Sciences, January, 2003, 19p. + Appendices.

 

23.       Al-Shayea, N.A., "Plastic-Damage Model for 3-D Stress-Strain Behavior of Soil," 1st progress report submitted to the University Research Committee, KFUPM, December, 2002.

 

24.       K. Azad, N. A. Al-Shayea, M. S. Al-Suwaiyan, and H. J., Al-Qahtani, “Certification of Practicing Civil Engineers in Saudi Arabia,” Final Report, submitted to the Civil Eng. Dept., Sptember, 2002.

 

25.       Naser Al-Shayea, “Guidelines for Design of Stabilization Measures to Control Wind-Blown Sand around Petroleum Facilities”, a discussion Paper submitted to Saudi Aramco-CSD, August 2002.

 

26.       Naser Al-Shayea, “Thermal Properties of Soils”, a discussion Paper submitted to Saudi Aramco-CSD, August 2002.

 

27.       Al-Shayea, et al., Contributing to a proposal of the project “Feasibility Study for Establishing a Private University in the Eastern Province”, CEMS, RI, KFUPM, July 2002.

 

28.       M. Hariri, Naser Al-Shayea, A. Qahwash, A. Al-Shaibani, “A Report on the Visit to the Landslide in Dilah Descent, Abha”, a report submitted to the Minster of Communication, 8 May, 2002.

 

29.       Al-Shayea, et al., Contributing to a proposal “Study of Concrete Thrust Anchors for Pipelines, Center for Engineering Research, RI, KFUPM, May 2002.

 

30.       Al-Shayea, et al., Contributing to a proposal “Verification of Structural Analysis of Two Buildings (PN CER2244), Center for Engineering Research, RI, KFUPM, April 2002.

 

31.       Naser Al-Shayea, “Marine Foundations in Saudi Aramco”, a research pre-proposal submitted to Saudi Aramco-CSD, April 2002.

 

32.       Naser Al-Shayea, “Stabilization of Wind-Blown Sand Around Petroleum Facilities”, a research pre-proposal submitted to Saudi Aramco-CSD, April 2002.

 

33.       Naser Al-Shayea, “Development of The SASW Method As A Mobile Automated Non-Invasive NDT System”, a research pre-proposal submitted to Saudi Aramco-CSD, April 2002.

 

34.       Naser Al-Shayea, “Design Guidelines of Mat Foundation For Tolerable Differention Settlement”, a research pre-proposal submitted to Saudi Aramco-CSD, April 2002.

 

35.       Naser Al-Shayea, “Stabilization of Wind-Blown Sand Around Petroleum Facilities”, a discussion Paper submitted to Saudi Aramco-CSD, April 2002.

 

36.       Abduljauwad, S., Al-Ghamdi, H., Al-Shayea, N.A., and Asi, I., Final Report, Behavior, Analysis and Design of Buried Pipelines (PN 20014), Civil Engineering Department, KFUPM, Dhahran, Saudi Arabia, August 2001, 500 p.

 

37.       Al-Shayea, N.A., "Plastic-Damage Model for 3-D Stress-Strain Behavior of Soil," A proposal submitted to the University Research Committee, KFUPM, June 16, 2001.

 

38.        Al-Shayea, N.A. (Member of the Team) et al., Contributing to the final report "Investigating of Cracking of Ground Beams in Building # 5060 for Al-Yamamah Hunter Project, Jubail," (CE 2207) for the Royal Saidi Naval Forces, Riyadh, June, 2001, 89 p + Apps.

 

39.       K. Azad, N. A. Al-Shayea, M. S. Al-Suwaiyan, and I. Asi, “Certification of Practicing Engineers in Saudi Arabia,” a proposal for a SYMPOSIUM submitted to the Civil Eng. Dept., June 2, 2001.

 

40.       K. Azad, N. A. Al-Shayea, M. S. Al-Suwaiyan, and I. Asi, “Certification of Practicing Civil Engineers in Saudi Arabia,” Interim Progress Report, submitted to the Civil Eng. Dept., May, 2001.

 

41.        Abduljauwad, S., Al-Ghamdi, H., Al-Shayea, N.A., and Asi, I., Fifth Progress Report, Behavior, Analysis and Design of Buried Pipelines (PN 20014), Civil Engineering Department, KFUPM, Dhahran, Saudi Arabia, April 2001, 182 p.

 

42.       Al-Shayea, N. A., et al., Contributions to The Fourth Progress Report, Behavior, Analysis and Design of Buried Pipelines (PN 20014), Civil Engineering Department, KFUPM, Dhahran, Saudi Arabia, Nov. 2000, 405 p.

 

43.       K. Azad, N. A. Al-Shayea, M. S. Al-Suwaiyan, and I. Asi, “Certification of Practicing Civil Engineers in Saudi Arabia,” a research proposal submitted to the Civil Eng. Dept., Nov. 11, 2000.

 

44.       N. A. Al-Shayea, et al., “Study of the Current Condition of Al-Corniche Tunnel, Jeddah,” contribution to a research proposal prepared for Zuhair Fayez Partnership Consultant, through Center for Engineering Research, RI, KFUPM, October, 2000.

 

45.       N. A. Al-Shayea, et al., “Topographical Survey, Rock Stability & Hydrological Studies at HRH Prince Waleed Bin Talal Farm, Wadi Hanifah, Riyadh,” contribution to a research proposal submitted to Al-Hoty Stanger Ltd. Co., through Center for Engineering Research, RI, KFUPM, September, 2000.

 

46.       N. A. Al-Shayea, “Investigation of Cracks in Housing Units, KFUPM (Hous # 5655, 5656 & 5657),” a research proposal submitted to Projects and maintenance Dept., KFUPM, through Civil Eng. Dept., Sept. 21, 2000.

 

47.        Al-Shayea, N.A. (Member of the Team) et al., Contributing to the proposal "Investigating of Cracking in Ground Beams in Building # 5060 for Al-Yamamah Hunter Project," for the Royal Navy Base in Jubail, June, 2000.

 

48.       Al-Shayea, N. A., et al., Contributions to The Third Progress Report, Behavior, Analysis and Design of Buried Pipelines (PN 20014), Civil Engineering Department, KFUPM, Dhahran, Saudi Arabia, April 2000, 402 p.

 

49.       Al-Shayea, N. A., Contributions to The Second Progress Report, Behavior, Analysis and Design of Buried Pipelines (PN 20014), Civil Engineering Department, KFUPM, Dhahran, Saudi Arabia, October, 1999.

 

50.       Al-Shayea, N. A., Contributions to The First Progress Report, Behavior, Analysis and Design of Buried Pipelines (PN 20014), Civil Engineering Department, KFUPM, Dhahran, Saudi Arabia, April, 1999.

 

51.       Al-Shayea, N. A., Determination of Elastic Moduli of Rock Core Specimens from Qassim-Madinah Expressway, A Proposal for A Service Quotation (SQ 0641, PN 90805) Submitted to Saudi Labs Ltd., Site Investigation, Testing Laboratory, Al-Khobar, Saudi Arabia, December 15, 1998.

 

52.       Al-Shayea, N. A., Influence of The Source Type on The 3-D Crosshole Tomography, A Final Report on The British Council Summer Research Program at The University of Surrey, U.K., Submitted to the Collage of Graduate Studies , KFUPM, Dhahran, Saudi Arabia, October 17, 1998.

 

53.       Al-Shayea, N. A., Fracture Toughness of Rocks, Contributions to The Final Report, Rock Mechanics Project (PN 21148), Petroleum Engineering Section, Petroleum & Gas Technology Division, The Research Institute, KFUPM, Dhahran, Saudi Arabia, September, 1997.

 

54.       Al-Shayea, N. A. , Contributions to The Report on the Site Visit to the Ground Subsidence in Mulajah Area, Submitted to the General Directory of Civil Defence/Eastern Provence, Civil Protection Department, Through Remote Sensing Center, Geology & Mineralogy Division, RI, KFUPM, Dhahran, Saudi Arabia, June 21, 1997.

 

55.       Al-Shayea, N. A., Contributions to The Research Proposal, Preventive Measures for Earthquake and Rainfall Hazards in Makkah Area, Submitted to Makkah Municipality, Through Gulf Group Consultant, Dammam, Saudi Arabia, May 31, 1997.

 

56.       Al-Shayea, N. A., Influence of The Source Type on The 3-D Crosshole Tomography, A Research Proposal Submitted to The British Council Research Program, Through Research Committee, Collage of Graduate Studies , KFUPM, Dhahran, Saudi Arabia, February 25, 1997.

 

57.       Al-Shayea, N. A., Abdulraheem, A., and Al-Amoudi, O. S. B., An Invesigation Into The Fracture Toughness and Tensile Strength of Indigenious Rocks, A Proposal for A Research Project Submitted to King Abdulaziz City for Science and Technology (KACST), General Directorate of Research Grants Programs, Project No. AT 17-46, Riyadh, Saudi Arabia, October 22, 1996.

 

58.       Al-Shayea, N. A., Fracture Toughness of Rocks, Contributions to The First Annual Report, Rock Mechanics Project (PN 21148), Petroleum Engineering Section, Petroleum & Gas Technology Division, The Research Institute, KFUPM, Dhahran, Saudi Arabia, September, 1996.

 

 

3. 1. 4.  Books and Manuals

 

1.          Al-Shayea, “Development of a Software to Evaluate Liquefaction Potential of Soils”, User Manual for the Software of the Project for Innovation Grants Scheme (IGS-22), College of Engineering Sciences, KFUPM, March 20 2006.

 

2.          N. Al-Shayea, A. Al-Arfaj, A. Al-Dharrab, A. Al-Shukri, and M. Rimmer, “Student Handbook for Subjects Entrance Exam (RAM-II)”, 186 p, KFUPM Press, 2005.

 

3.          Al-Shayea, N. A. et al., Contribution to the KFUPM Traffic Safety Handbook, Traffic Safety Committee, KFUPM, Dhahran, Saudi Arabia, KFUPM Press, 3rd ed., 2003, 35 p.

 

4.          Al-Shayea, N.A., User Manual for the program, Analysis and Design of Buried Steel Pipelines, Civil Engineering Department, KFUPM, Dhahran, Saudi Arabia, August 2001, 120 p.

 

5.          N. Al-Shayea, A. Al-Arfaj, A. Al-Dharrab, A. Al-Shukri, and M. Rimmer, “Student Handbook for Subjects Entrance Exam (RAM-II)”, 185 p, KFUPM Press, 2001.

 

6.          Al-Shayea, N.A. (Chairman, Follow-Up Committee for Subjects Tests) et al., New Entrance Test Booklet, RAM2 – English Version, KFUPM, Dhahran, Saudi Arabia, KFUPM Press, April 22, 2001, 44 p.

 

7.           Al-Shayea, N.A. (Chairman, Follow-Up Committee for Subjects Tests) et al., New Entrance Test Booklet, RAM2 – Arabic Version, Four Codes, KFUPM, Dhahran, Saudi Arabia, KFUPM Press, Feb. 18, 2001, 48 p each.

 

8.           Al-Shayea, N.A. (Chairman, Follow-Up Committee for Subjects Tests) et al., New Entrance Test Booklet, RAM2 – English Version, KFUPM, Dhahran, Saudi Arabia, KFUPM Press, April 9, 2000, 44 p.

 

9.           Al-Shayea, N.A. (Chairman, Follow-Up Committee for Subjects Tests) et al., New Entrance Test Booklet, RAM2 – Arabic Version, Four Codes, KFUPM, Dhahran, Saudi Arabia, KFUPM Press, March 4, 2000, 48 p each.

 

10.       Al-Shayea, N. A. (Chairman, Lab. Committee) et al., Handbook of Civil Engineering Laboratory Facilities, Civil Engineering Department, KFUPM, Dhahran, Saudi Arabia, KFUPM Press, 1996, 30 p.